fsPtpTransparentPortPeerMeanPathDelay
SUPERMICRO-PTP-MIB ·
.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.7
Object
column
SNMPv2-TCDisplayString
If the ptpTransparentClockDelaymechanism is P2P then this
indicates the mean propagation delay of the ingress link
connected to this port
The time interval field represents the values in scalednanoseconds.
The scalednanoseconds member is the time interval expressed in
units of nanoseconds and multiplied by 2^16.
Positive or negative time intervals outside the maximum range of
this data type shall be encoded as the largest positive and
negative values of this data type, respectively. For example, 2.5
nanoseconds, will be expressed as 2.5 * 2^16 and the value
converted to hexadecimal that will obviously evolve to
0000 0000 0002 8000 base 16.
Context
- MIB
- SUPERMICRO-PTP-MIB
- OID
.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsPtpTransparentPortDataSetEntry
- Table
- fsPtpTransparentPortDataSetTable
- Siblings
- 8
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPtpTransparentPortIndex The index value used to identify the port component on
the transparent clock. The value of this object is used
as a port index to the ptpTransparentPortDataSetTable. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.1 |
| fsPtpTransparentPortInterfaceType This denotes the type of the interface. PTP port bears a seperate
meaning than the one that are normally defined in interface mibs.
PTP can run over physical interfaces, VLAN ide… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.2 |
| fsPtpTransparentPortIfaceNumber This denotes the interface number assigned in the interface manager
of the system. PTP assigned interface numbers are different from the
the values assigned in interface mib. This… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.3 |
| fsPtpTransparentPortClockIdentity This is the clock identity of the transparent clock. This is the
index to the ptpPortConfigDataSetTable. | column | OctetString | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.4 |
| fsPtpTransparentPortMinPdelayReqInterval This is the Pdelay_Req interval. This is used if the
transparent clock is Peer-to-Peer. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.5 |
| fsPtpTransparentPortFaultyFlag This is the faulty status of the port. This value will be made TRUE
if the port enters into Faulty state. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.6 |
| fsPtpTransparentPortPtpStatus The effective Operational state of the port in PTP. PTP will be
operational over this interface only when the value of this object
is set to true. Otherwise PTP will be non-operat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.8 |
| fsPtpTransparentPortRowStatus RowStatus for creating the entries into this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.9 |