SUPERMICRO-LA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
71

fsLaPortChannelTable

table
.1.3.6.1.4.1.10876.101.1.63.2.1 · 1 row entry · 32 columns
Open in standard view 
A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel
fsLaPortChannelEntry entry .1.3.6.1.4.1.10876.101.1.63.2.1.1
There is one entry in this table for each created
port-channel port
Indexes
fsLaPortChannelIfIndex
Column Syntax OID
fsLaPortChannelIfIndex
The ifIndex of the port-channel(Aggregator's
interface index).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.1
fsLaPortChannelGroup
An index that uniquely identifies an entry in this table.
LacpKey
Textual Convention: LacpKey Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.2
fsLaPortChannelAdminMacAddress deprecated
This object is used for configuring MacAddress that is
to be used by the port-channel when fsLaPortChannelMacSelection
is force.
WARNING:The value configured should not conflict
with the MAC address of system ports tha…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.3
fsLaPortChannelMacSelection deprecated
Indicates the MAC address selection method for
for the port-channel.
Dynamic - System will reserve certain MAC address
for aggregators. These MAC address are
derived from BaseMac. If this object is
…
Enumerationr/w
Enumerated Values:
1dynamic
2force
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.4
fsLaPortChannelMode
Current Operating Channel Mode of the port
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled.
PortLaMode
Textual Convention: PortLaMode Enumeration
Type Values:
1lacp
2manual
3disable
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.5
fsLaPortChannelPortCount
The number of ports actually configured to the port-channel
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.6
fsLaPortChannelActivePortCount
This object will give the number of ports that are attached to the
port-channel and actively carrying data traffic on the link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.7
fsLaPortChannelSelectionPolicy
Link selection policy to be used by the port-channel.
Selection policy isid implies selection based on Service-instance
and is applicable only in Provider BackBone bridge.
Enumerationr/w
Enumerated Values:
1macSrc
2macDst
3macSrcDst
4ipSrc
5ipDst
6ipSrcDst
7vlanId
8isid
9macSrcVid
10macDstVid
11macSrcDstVid
12mplsVcLabel
13mplsTunnelLabel
14mplsVcTunnelLabel
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.8
fsLaPortChannelDefaultPortIndex
The ifIndex of the default port that gets attached to the
aggregator. A value of 0 means there is no default port for
this port-channel.
If this object is set to 0, it will remove the current default
port from the aggr…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.9
fsLaPortChannelMaxPorts
This object specifies the maximun number of
ports that can attach to a port-channel.
Integer32r/w
Constraints:
range: 2-8
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.10
fsLaPortChannelSelectionPolicyBitList
This object is used to set the Link selection policy to be
used by the port-channel.
A FOUR BYTE integer is used for setting the selecting policy.
Each BIT in the four byte integer, represents a particular
selection pol…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.11
fsLaPortChannelDLAGDistributingPortIndex
This object is used to configure the distributing
port on which D-LAG periodic-sync and
D-LAG event-update messages will be sent/received
for D-LAG internal communication between the D-LAG
nodes.

Ports wh…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.12
fsLaPortChannelDLAGSystemID
This object is used to configure the common System ID in
D-LAG nodes to be used for communicating with the peer node
when D-LAG status is enabled.

Since all the D-LAG nodes use this common D-LAG system ID…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.13
fsLaPortChannelDLAGSystemPriority
This object is used for configuring common system priority in
D-LAG nodes to be used for communicating with the peer node when
D-LAG status is enabled.

Since all the D-LAG nodes use this common D-LAG syst…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.14
fsLaPortChannelDLAGPeriodicSyncTime
This object is used to configure the D-LAG periodic sync timer
used in Distributed Link Aggregation.
Periodic sync timer is used to configure the transmission
interval of D-LAG periodic-sync PDUs. Periodic-sync timer
wi…
millisecondsUnsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.15
fsLaPortChannelDLAGMSSelectionWaitTime
This object is used to configure the period for the
master slave selection wait timer used in Distributed
Link Aggregation.

This object is applicable, only if D-LAG status
and D-LAG redundancy feature i…
millisecondsUnsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.16
fsLaPortChannelDLAGRolePlayed
This object is used to hold the current role played by the device
participating in Distributed LAG.

This object is applicable, only if D-LAG status and D-LAG
redundancy feature is enabled.

…
Enumeration
Enumerated Values:
0none
1master
2slave
3backupmaster
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.17
fsLaPortChannelDLAGStatus
This object is used to enable or disable the D-LAG
functionality.

This object can be modified irrespective of whether
corresponding port-channel is enabled/disabled.

Configuring D-LAG statu…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.18
fsLaPortChannelDLAGRedundancy
This object is used to enable/disable the redundancy feature
in D-LAG node.

When D-LAG redundancy feature is enabled, master-slave-selection
algorithm can be used to select master/slave/backup-master.
…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.19
fsLaPortChannelDLAGMaxKeepAliveCount
This read-only mib object is used to provide keep alive
mechanism when D-LAG status is enabled.
Each D-LAG node will have a Max Keep alive count and each D-LAG
node maintains seperate keep alive counts for all other rem…
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.20
fsLaPortChannelDLAGPeriodicSyncPduTxCount
This object is used when Distributing feature is enabled in a
node to hold the number of periodic-sync PDUs sent on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.21
fsLaPortChannelDLAGPeriodicSyncPduRxCount
This object is used when Distributing feature is enabled in a
node to hold the number of periodic-sync PDUs received on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.22
fsLaPortChannelDLAGEventUpdatePduTxCount
This object is used when Distributing feature is enabled in a
node to hold the number of event-update PDUs sent on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.23
fsLaPortChannelDLAGEventUpdatePduRxCount
This object is used when Distributing feature is enabled in a
node to hold the number of event-update PDUs received on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.24
fsLaPortChannelDLAGElectedAsMasterCount
This object is used when Distributing feature and redundancy
feature both are enabled in a D-LAG node to hold the number of
times the port-channel has been selected as master.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.25
fsLaPortChannelDLAGElectedAsSlaveCount
This object is used when Distributing feature and redundancy
feature both are enabled in a D-LAG node to hold the number of
times the port-channel has been selected as slave.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.26
fsLaPortChannelTrapTxCount
The number of trap messages sent from the port-channel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.27
fsLaPortChannelDLAGDistributingPortList
This object is used to configure the distributing
port list on which D-LAG periodic-sync and
D-LAG event-update messages will be sent/received
for D-LAG internal communication between the D-LAG
nodes.

Por…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.28
fsLaPortChannelFallback
This object is used to enable or disable fallback on this port-channel.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.29
fsLaPortChannelFallbackTime
Duration of a port to bundle state.
SNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.30
fsLaPortChannelFallbackState
This read-only object is used to display the fallback state in this port-channel.
init(0) - Fallback is disabled in this port-channel.
inactive(1) - Fallback is enabled, and doesn't receive LACPDU.
activ…
Enumeration
Enumerated Values:
0init
1inactive
2active
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.31
fsLaPortChannelFallbackSysId
This object is used to specify which MLAG portal system can bring
up the local aggregator port if LACPDU is not received from the
LACP partner.
If this object is configured to value '0', then always bring up port
fro…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.10876.101.1.63.2.1.1.32

fsLaPortTable

table
.1.3.6.1.4.1.10876.101.1.63.3.1 · 1 row entry · 10 columns
Open in standard view 
A table that contains objects to set the port lacp mode
of dot3adAggPortTable.
fsLaPortEntry entry .1.3.6.1.4.1.10876.101.1.63.3.1.1
Each entry in this table is for each physical port that participates
in Link Aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex.
Indexes
fsLaPortIndex
Column Syntax OID
fsLaPortIndex
The ifIndex of the port
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.1
fsLaPortMode
This object is used to enable LACP , disable LACP or manually
aggregate a port
PortLaModer/w
Textual Convention: PortLaMode Enumeration
Type Values:
1lacp
2manual
3disable
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.2
fsLaPortBundleState
This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable o…
Enumeration
Enumerated Values:
0upInBndl
1standby
2down
3upIndividual
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.3
fsLaPortActorResetAdminState
A string of 8 bits,corresponding to the administrative values
of Actor_State as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1…
LacpStater/w
Textual Convention: LacpState Bits
Type Values:
0lacpActivity
1lacpTimeout
2aggregation
3synchronization
4collecting
5distributing
6defaulted
7expired
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.4
fsLaPortAggregateWaitTime
Duration of the port to attach to the PortChannel.
SNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.5
fsLaPortPartnerResetAdminState
A string of 8 bits,corresponding to the administrative values
of Partner_State.The first bit corresponds to bit 0 of Partner_State
(LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout),
the third bi…
LacpStater/w
Textual Convention: LacpState Bits
Type Values:
0lacpActivity
1lacpTimeout
2aggregation
3synchronization
4collecting
5distributing
6defaulted
7expired
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.6
fsLaPortActorAdminPort
The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.7
fsLaPortRestoreMtu
The Restore mtu stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed only during config-save-restore
operation…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.8
fsLaPortSelectAggregator
This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The port is involved only in static aggregati…
Enumeration
Enumerated Values:
0static
1dynamic
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.9
fsLaPortAutoLAG
Enable or Disable Auto-LAG on individual port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.63.3.1.1.10

fsLaHwFailTrapObjectsTable

table
.1.3.6.1.4.1.10876.101.1.63.4.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to store the notification information
occurred
fsLaHwFailTrapObjectsEntry entry .1.3.6.1.4.1.10876.101.1.63.4.1.1
This entry is used to store the notification information
Indexes
fsLaTrapPortChannelIndex fsLaTrapPortIndex
Column Syntax OID
fsLaTrapPortChannelIndex
The ifIndex of the port-channel for which the failure has occured.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.4.1.1.1
fsLaTrapPortIndex
The ifIndex of the port for which the failure has occured.
A value of 0 means the failure is not port-specific.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.10876.101.1.63.4.1.1.2
fsLaHwFailTrapType
The hardware error type.
Enumeration
Enumerated Values:
0createAgg
1addLinkToAgg
2deleteAgg
3removeLinkFromAgg
4setSelectionPolicy
5enableCollection
6disableCollection
7enableDistribution
 .1.3.6.1.4.1.10876.101.1.63.4.1.1.3

fsLaDLAGTrapObjectsTable

table
.1.3.6.1.4.1.10876.101.1.63.4.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to store the notification information
occurred for the Distributed Link Aggregation.
fsLaDLAGTrapObjectsEntry entry .1.3.6.1.4.1.10876.101.1.63.4.2.1
This entry is used to store the notification information.
Indexes
fsLaDLAGTrapPortChannelIndex
Column Syntax OID
fsLaDLAGTrapPortChannelIndex
The port-channel interface index of the node which is
role change event has occurred because of the
master-slave-re-selection process.
The role change can be either from master to slave
or from slave to master.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.4.2.1.1
fsLaDLAGTrapType
Traps generated in the master-slave selection/ master-slave-reselection process
Trap Type can be
mastertobackupmaster : When the role played by the device changes
from master to backup-master.…
Enumeration
Enumerated Values:
0mastertobackupmaster
1backupmastertomaster
2slavetobackupmaster
3backupmastertoslave
4mastertoslave
5slavetomaster
 .1.3.6.1.4.1.10876.101.1.63.4.2.1.2

fsLaDLAGRemotePortChannelTable

table
.1.3.6.1.4.1.10876.101.1.63.6.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to access the stored details of
all remote port-channels that are part of same D-LAG.
This table is indexed by Port channel index and
remote port-channel unique system id.
All other objects in this table displays stored 
details of the remote port-channel.
fsLaDLAGRemotePortChannelEntry entry .1.3.6.1.4.1.10876.101.1.63.6.1.1
There is one entry in this table for each remote port-channel
participating in Distributed LAG other than the self.
Indexes
fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID
Column Syntax OID
fsLaDLAGRemotePortChannelSystemID
This is used to read the stored 6-octet MAC address value
of each remote D-LAG node, which uniquely identifies the
remote D-LAG node.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.1.63.6.1.1.1
fsLaDLAGRemotePortChannelSystemPriority
This object is used to read the stored system priority of
each remote D-LAG node
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.63.6.1.1.2
fsLaDLAGRemotePortChannelRolePlayed
This object is used to read the stored value of
current role played by each remote D-LAG node

Value of Role Played by the remote D-LAG node can be
none (0) - Current role played by the rem…
Enumeration
Enumerated Values:
0none
1master
2slave
3backupmaster
 .1.3.6.1.4.1.10876.101.1.63.6.1.1.3
fsLaDLAGRemotePortChannelKeepAliveCount
This object represents the current keep alive count value of
running keep alive counter maintained for each remote D-LAG node.

This count will be incremented by value 1 for all the remote
D-LAG node entri…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.6.1.1.4

fsLaDLAGRemotePortTable

table
.1.3.6.1.4.1.10876.101.1.63.7.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to access the stored port list information
of each remote D-LAG node.
This table is indexed by combination of port-channel index,
remote port-channel unique system ID, and port indices configured
for that remote D-LAG node.
fsLaDLAGRemotePortEntry entry .1.3.6.1.4.1.10876.101.1.63.7.1.1
There is one entry in this table for each port belonging
to the remote D-LAG node.
Indexes
fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID fsLaDLAGRemotePortIndex
Column Syntax OID
fsLaDLAGRemotePortIndex
This object is used to get the ifIndex of each port
belonging to the remote D-LAG node.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.7.1.1.1
fsLaDLAGRemotePortBundleState
This read-only object is used to get the port bundle states of each port belonging
to the remote D-LAG node
upInBndl(0) - The port is operationally up and actively takes part in aggregation.
standby(1) …
Enumeration
Enumerated Values:
0upInBndl
1standby
2down
3upIndividual
 .1.3.6.1.4.1.10876.101.1.63.7.1.1.2
fsLaDLAGRemotePortSyncStatus
This read-only object is used to get the current sync status
of the each port belonging to the remote D-LAG node
inSync(1) - The port sync status is inSync.
outofSync(2) - The port sync sta…
Enumeration
Enumerated Values:
1inSync
2outofSync
 .1.3.6.1.4.1.10876.101.1.63.7.1.1.3

fsLaDrniTable

table
.1.3.6.1.4.1.10876.101.1.63.8.1 · 1 row entry · 10 columns
Open in standard view 
A table that contains information about every
DRNI that is associated with this System.
fsLaDrniEntry entry .1.3.6.1.4.1.10876.101.1.63.8.1.1
A list of the DRNI parameters. This is indexed
by the DRNI Portal ID.
Indexes
fsLaDrniIndex
Column Syntax OID
fsLaDrniIndex
The unique identifier allocated to this Distributed Relay by
the local System. This attribute identifies a Distributed Relay
instance among the subordinate managed objects of the
containing object. This value is read-on…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.1
fsLaDrniDescription
A human-readable text string containing information about the
Distribute Relay. This string is read-only. The contents are
vendor specific.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.2
fsLaDrniName
A human-readable text string containing a locally significant
name for the Distributed Relay. This string is read-write.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.3
fsLaDrniPortalAddr
A read-write identifier of a particular Portal.
aDrniPortalAddr has to be unique among at least all of the
potential Portal Systems to which a given Portal System might
be attached via an IPL Intra-Portal Link. Also use…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.4
fsLaDrniPortalPriority
A 2-octet read-write value indicating the priority value
associated with the Portal's System ID. Also used as the
Actor's System Priority (6.3.2) for the emulated system.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.5
fsLaDrniPortalSystemNumber
A read-write identifier of this particular Portal System
within a Portal. It is the responsibility of the network
administrator to ensure that these numbers are unique among
the Portal Systems with the same aDrniPortalA…
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.6
fsLaDrniIntraPortalLinkList
Read-write list of the Interface Identifiers of the Ports to
the Intra-Portal Links assigned to this Distributed Relay. Each
Interface Identifier, a Port ID (6.3.4), has the two least
significant bits of its Port Priori…
PortalLinkListr/w
Textual Convention: PortalLinkList OctetString
Type Constraints:
range: 12
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.7
fsLaDrniAggregator
An INTEGER that matches the syntax of an Interface Identifier.
Read-write Interface Identifier of the Aggregator Port assigned
to this Distributed Relay.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.8
fsLaDrniNeighborAdminDRCPState
A string of 8 bits, corresponding to the administrative
values of DRCP_State [item s) in 9.4.3.2] as transmitted by
this Portal System in DRCPDUs. The first bit corresponds to
bit 0 of DRCP_State (HomeGateway), the seco…
DrcpStater/w
Textual Convention: DrcpState Bits
Type Values:
0homeGateway
1neighborGateway
2otherGateway
3ippActivity
4timeout
5gatewaySync
6portSync
7expired
 .1.3.6.1.4.1.10876.101.1.63.8.1.1.9
fsLaDrniPSI
A read-only Boolean value providing the value of PSI, which
indicates whether this Portal System is isolated from the
other Portal Systems within the same Portal ('TRUE') or not
('FALSE').
.1.3.6.1.4.1.10876.101.1.63.8.1.1.10

fsLaIPPAttributeTable

table
.1.3.6.1.4.1.10876.101.1.63.9.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about every
IPP that is associated with this System.
fsLaIPPAttributeEntry entry .1.3.6.1.4.1.10876.101.1.63.9.1.1
An entry containing Attributes for an IPP.
Indexes
fsLaIPPIndex
Column Syntax OID
fsLaIPPIndex
The unique identifier allocated to this IPP by the
local Portal System. This attribute identifies an
IPP instance among the subordinate managed objects of
the containing object. This value is read-only.
NOTE-The aIPPID …
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.10876.101.1.63.9.1.1.1
fsLaIPPAdminState
This read-write value defines the administrative state of
the IPP. A value of 'up' indicates that the operational state
of the IPP (aIPPOperState) is permitted to be either up or
down. A value of 'down' forces the opera…
AggStater/w
Textual Convention: AggState Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.10876.101.1.63.9.1.1.2
fsLaIPPOperState
This read-only value defines the operational state of the
IPP. The operational state is 'up' if the IPL is operational,
and if the value of aIPPAdminState for the IPP is also 'up'.
If the IPL is not operational, or if t…
AggState
Textual Convention: AggState Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.10876.101.1.63.9.1.1.3
fsLaIPPTimeOfLastOperChange
The time at which the interface entered its current
operational state, in terms of centiseconds since the
system was last reset. If the current state was entered
prior to the last reinitialization of the local network
m…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.63.9.1.1.4

fsLaIPPStatsTable

table
.1.3.6.1.4.1.10876.101.1.63.9.2 · 1 row entry · 3 columns
Open in standard view 
A table that contains information for IPP
statistics. A row appears in this table for
each IPP in the system.
fsLaIPPStatsEntry entry .1.3.6.1.4.1.10876.101.1.63.9.2.1
An entry containing Statistics for an IPP.
Indexes
fsLaIPPIndex
Column Syntax OID
fsLaIPPStatsDRCPDUsRx
The number of valid DRCPDUs received on this IPP. This value
is read-only.
framesSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.1.63.9.2.1.1
fsLaIPPStatsIllegalRx
The number of frames received that carry the DRCP Ethernet
Type value (9.4.2.4), but contain a badly formed PDU. This
value is read-only.
framesSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.1.63.9.2.1.2
fsLaIPPStatsDRCPDUsTx
The number of DRCPDUs transmitted on this IPP. This value
is read-only.
framesSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.1.63.9.2.1.3