fsLaPortChannelAdminMacAddress

SUPERMICRO-LA-MIB · .1.3.6.1.4.1.10876.101.1.63.2.1.1.3

Object

column deprecated r/w SNMPv2-TCMacAddress

This object is used for configuring MacAddress that is
to be used by the port-channel when fsLaPortChannelMacSelection
is force.
WARNING:The value configured should not conflict 
with the MAC address of system ports that are not configured
to select this port-channel.

Context

MIB: SUPERMICRO-LA-MIB
OID: .1.3.6.1.4.1.10876.101.1.63.2.1.1.3
Type: column
Access: readwrite
Status: deprecated
Parent: fsLaPortChannelEntry
Table: fsLaPortChannelTable
Siblings: 31

Syntax

SNMPv2-TCMacAddress

Source: SNMPv2-TCMacAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 6

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsLaPortChannelIfIndex The ifIndex of the port-channel(Aggregator's interface index).	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.1`
fsLaPortChannelMaxPorts This object specifies the maximun number of ports that can attach to a port-channel.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.10`
fsLaPortChannelSelectionPolicyBitList This object is used to set the Link selection policy to be used by the port-channel. A FOUR BYTE integer is used for setting the selecting policy. Each BIT in the four byte intege…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.11`
fsLaPortChannelDLAGDistributingPortIndex This object is used to configure the distributing port on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG internal communication between …	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.12`
fsLaPortChannelDLAGSystemID This object is used to configure the common System ID in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since all the D-L…	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.13`
fsLaPortChannelDLAGSystemPriority This object is used for configuring common system priority in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since all th…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.14`
fsLaPortChannelDLAGPeriodicSyncTime This object is used to configure the D-LAG periodic sync timer used in Distributed Link Aggregation. Periodic sync timer is used to configure the transmission interval of D-LAG pe…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.15`
fsLaPortChannelDLAGMSSelectionWaitTime This object is used to configure the period for the master slave selection wait timer used in Distributed Link Aggregation. This object is applicable, only if D-LA…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.16`
fsLaPortChannelDLAGRolePlayed This object is used to hold the current role played by the device participating in Distributed LAG. This object is applicable, only if D-LAG status and D-LAG redund…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.17`
fsLaPortChannelDLAGStatus This object is used to enable or disable the D-LAG functionality. This object can be modified irrespective of whether corresponding port-channel is enabled/disabled…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.18`
fsLaPortChannelDLAGRedundancy This object is used to enable/disable the redundancy feature in D-LAG node. When D-LAG redundancy feature is enabled, master-slave-selection algorithm can be used t…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.19`
fsLaPortChannelGroup An index that uniquely identifies an entry in this table.	column	LacpKey	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.2`
fsLaPortChannelDLAGMaxKeepAliveCount This read-only mib object is used to provide keep alive mechanism when D-LAG status is enabled. Each D-LAG node will have a Max Keep alive count and each D-LAG node maintains sepe…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.20`
fsLaPortChannelDLAGPeriodicSyncPduTxCount This object is used when Distributing feature is enabled in a node to hold the number of periodic-sync PDUs sent on the distributing port.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.21`
fsLaPortChannelDLAGPeriodicSyncPduRxCount This object is used when Distributing feature is enabled in a node to hold the number of periodic-sync PDUs received on the distributing port.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.22`
fsLaPortChannelDLAGEventUpdatePduTxCount This object is used when Distributing feature is enabled in a node to hold the number of event-update PDUs sent on the distributing port.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.23`
fsLaPortChannelDLAGEventUpdatePduRxCount This object is used when Distributing feature is enabled in a node to hold the number of event-update PDUs received on the distributing port.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.24`
fsLaPortChannelDLAGElectedAsMasterCount This object is used when Distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been selected as master.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.25`
fsLaPortChannelDLAGElectedAsSlaveCount This object is used when Distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been selected as slave.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.26`
fsLaPortChannelTrapTxCount The number of trap messages sent from the port-channel.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.27`
fsLaPortChannelDLAGDistributingPortList This object is used to configure the distributing port list on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG internal communication bet…	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.28`
fsLaPortChannelFallback This object is used to enable or disable fallback on this port-channel.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.29`
fsLaPortChannelFallbackTime Duration of a port to bundle state.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.30`
fsLaPortChannelFallbackState This read-only object is used to display the fallback state in this port-channel. init(0) - Fallback is disabled in this port-channel. inactive(1) - Fallback is en…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.31`
fsLaPortChannelFallbackSysId This object is used to specify which MLAG portal system can bring up the local aggregator port if LACPDU is not received from the LACP partner. If this object is configured to v…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.32`
fsLaPortChannelMacSelection deprecated Indicates the MAC address selection method for for the port-channel. Dynamic - System will reserve certain MAC address for aggregators. These MAC address are d…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.4`
fsLaPortChannelMode Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). dis…	column	PortLaMode	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.5`
fsLaPortChannelPortCount The number of ports actually configured to the port-channel	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.6`
fsLaPortChannelActivePortCount This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.7`
fsLaPortChannelSelectionPolicy Link selection policy to be used by the port-channel. Selection policy isid implies selection based on Service-instance and is applicable only in Provider BackBone bridge.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.8`
fsLaPortChannelDefaultPortIndex The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set to 0, it will remov…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.10876.101.1.63.2.1.1.9`