SUPERMICRO-L2VPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
70

vplsConfigTable

table
.1.3.6.1.4.1.10876.101.2.72.1.2 · 1 row entry · 14 columns
Open in standard view 
This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).
vplsConfigEntry entry .1.3.6.1.4.1.10876.101.2.72.1.2.1
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row is created by the operator or by the …
Indexes
vplsConfigIndex
Column Syntax OID
vplsConfigIndex
Unique index for the conceptual row identifying
a VPLS service.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.1
vplsConfigName
A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.2
vplsConfigDescr
A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.3
vplsConfigAdminStatus
The desired administrative state of the VPLS
service. If the administrative status of the
Vpls service is changed to enable then this
service is able to utilize the pseudo wire to
perform the tasks of a VPLS service.
Th…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.4
vplsConfigMacLearning
This object specifies if MAC Learning is enabled
in this service. If this object is true then Mac
Learning is enabled. If false, then Mac Learning is
disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.6
vplsConfigDiscardUnknownDest
If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.7
vplsConfigMacAging
If the value of this object is 'true'
then the MAC ageing process is enabled in
this VPLS. If 'false', then the MAC ageing process
is disabled
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.8
vplsConfigFwdFullHighWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance at
which the vplsFwdFullAlarmRaised notification
will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.10
vplsConfigFwdFullLowWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance
at which the vplsFwdFullAlarmCleared
notification will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.11
vplsConfigRowStatus
For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.12
vplsConfigMtu
The value of this object specifies the MTU of this
vpls instance.
Unsigned32r/w
Constraints:
range: 64-1518
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.13
vplsConfigVpnId
This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service.
VPNIdOrZero
Textual Convention: VPNIdOrZero OctetString
Type Constraints:
range: 0
range: 7
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.14
vplsConfigServiceType
The value of this object specifies the type of
service emulated by this vpls instance.
Enumerationr/w
Enumerated Values:
1vlan
2ethernet
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.15
vplsConfigStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.10876.101.2.72.1.2.1.16

vplsStatusTable

table
.1.3.6.1.4.1.10876.101.2.72.1.3 · 1 row entry · 2 columns
Open in standard view 
This table provides information for monitoring
Virtual Private Lan Services(VPLS).
vplsStatusEntry entry .1.3.6.1.4.1.10876.101.2.72.1.3.1
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically create…
Indexes
vplsConfigIndex
Column Syntax OID
vplsStatusOperStatus
The current operational state of this VPLS Service.
Enumeration
Enumerated Values:
0other
1up
2down
 .1.3.6.1.4.1.10876.101.2.72.1.3.1.1
vplsStatusPeerCount
This objects specifies the number of peers
present in this vpls instance.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.1.3.1.2

vplsPwBindTable

table
.1.3.6.1.4.1.10876.101.2.72.1.4 · 1 row entry · 4 columns
Open in standard view 
This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable
vplsPwBindEntry entry .1.3.6.1.4.1.10876.101.2.72.1.4.1
Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the …
Indexes
vplsConfigIndex PW-STD-MIBpwIndex
Column Syntax OID
vplsPwBindConfigType
The value of this object indicates
whether the Pseudo Wire binding was created
manually or via autodiscovery.

The value of this object must be
specifed when the row is created and cannot
be changed while …
Enumerationr/w
Enumerated Values:
1manual
2autodiscovery
 .1.3.6.1.4.1.10876.101.2.72.1.4.1.1
vplsPwBindType
The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.

The value of this object must be
specifed when the row is created and cannot
be changed while the row status is…
Enumerationr/w
Enumerated Values:
1mesh
2spoke
 .1.3.6.1.4.1.10876.101.2.72.1.4.1.2
vplsPwBindRowStatus
For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.1.4.1.3
vplsPwBindStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.10876.101.2.72.1.4.1.4

vplsBgpADConfigTable

table
.1.3.6.1.4.1.10876.101.2.72.1.5 · 1 row entry · 4 columns
Open in standard view 
This table specifies information for configuring
BGP Auto-discovery parameters for a given Vpls service.
vplsBgpADConfigEntry entry .1.3.6.1.4.1.10876.101.2.72.1.5.1
A row in this table represents BGP based autodiscovery
is in use for this instance of Vpls.
A row in this table is indexed by vplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create objects can…
Indexes
vplsConfigIndex
Column Syntax OID
vplsBgpADConfigRouteDistinguisher
The route distinguisher for this VPLS. See [RFC4364]
for a complete definition of a route distinguisher.
for more details on use of a route distinguisher
for a VPLS service, see [RFC4761]
VplsBgpRouteDistinguisherr/w
Textual Convention: VplsBgpRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.10876.101.2.72.1.5.1.1
vplsBgpADConfigPrefix
In case of auto-discovery the default prefix advertised
is the ip address of the loopback. In case the user wants
to override the loopback address, vplsBgpADConfigPrefix
should be set. When this value if non-zero it is …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.1.5.1.2
vplsBgpADConfigVplsId
VplsId is a unique identifier for all VSIs belonging to
the same VPLS. It is advertised as an extended community
VplsBgpRouteDistinguisherr/w
Textual Convention: VplsBgpRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.10876.101.2.72.1.5.1.3
vplsBgpADConfigRowStatus
For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.1.5.1.4

vplsBgpRteTargetTable

table
.1.3.6.1.4.1.10876.101.2.72.1.6 · 1 row entry · 4 columns
Open in standard view 
This table specifies the list of Route Targets
imported or exported by BGP during auto-discovery of VPLS.
vplsBgpRteTargetEntry entry .1.3.6.1.4.1.10876.101.2.72.1.6.1
An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value
of vplsBgpRteTargetType an RT might be exported or
imported or both. Every VPLS which
uses auto-discovery for find…
Indexes
vplsConfigIndex vplsBgpRteTargetIndex
Column Syntax OID
vplsBgpRteTargetIndex
This index along with vplsConfigIndex,identifies one entry
in the vplsBgpRteTargetTable. By keeping vplsConfigIndex
constant and using new value of vplsBgpRteTargetIndex user
can configure multiple Route Targets for th…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.1.6.1.1
vplsBgpRteTargetRTType
Used to define the type of a route target usage.
Route targets can be specified to be imported,
exported, or both. For a complete definition of a
route target, see [RFC4364].
VplsBgpRouteTargetTyper/w
Textual Convention: VplsBgpRouteTargetType Enumeration
Type Values:
1import
2export
3both
 .1.3.6.1.4.1.10876.101.2.72.1.6.1.2
vplsBgpRteTargetRT
The route target associated with the VPLS service.
For more details on use of route targets
for a VPLS service, see [RFC4761]
VplsBgpRouteTargetr/w
Textual Convention: VplsBgpRouteTarget OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.10876.101.2.72.1.6.1.3
vplsBgpRteTargetRTRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.1.6.1.4

fsL2VpnPwRedGroupTable

table
.1.3.6.1.4.1.10876.101.2.72.4.1 · 1 row entry · 14 columns
Open in standard view 
The PW Redundancy Group table for pseudo-wire. Each entry in this
table corresponds to a configured Redundancy Group. This table
contains the group specific attributes. The entry in this table
are derived in reference from the (draft draft-ietf-pwe3-redundancy-07
& draft-ietf-pwe3-redundancy-bit-07).
fsL2VpnPwRedGroupEntry entry .1.3.6.1.4.1.10876.101.2.72.4.1.1
The PW Redundancy Group table entry. This table allows the user to
configure the Redundancy Group related parameters. Once the redundancy
entries are created then the pseudo-wires can be associated to each
Group. The sw…
Indexes
fsL2VpnPwRedGroupIndex
Column Syntax OID
fsL2VpnPwRedGroupIndex
The unique identifier for the pseudowire redundancy protection group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.1
fsL2VpnPwRedGroupProtType
This object is used to indicate the protection architecture type of the
redundancy group. Protection architecture types supported are give below:

- 'onePlusOneWithLdp(1),provides 1+1 support for the pseud…
Enumerationr/w
Enumerated Values:
1onePlusOne
2oneIsToOne
3oneIsToN
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.2
fsL2VpnPwRedGroupReversionType
This object is used to indicate the operation type/mode of the
protection group entry. If the value is set to 'revertive(1)', then
normal traffic will be shifted from the protection entity back to the
working entity upo…
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.3
fsL2VpnPwRedGroupContentionResolutionMethod
This object is used to indicate the mode of operation of the
pseudo-wire group. If the mode is configured as independent then the PW
endpoint nodes independently select which PW they intend to make active
and which PWs …
Enumerationr/w
Enumerated Values:
1independent
2masterslave
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.4
fsL2VpnPwRedGroupMasterSlaveMode
This value is applicable only if the
fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'.
Then the user can specify if this group is acting as Master or Slave.
When the Redundancy Group is configure…
Enumerationr/w
Enumerated Values:
1master
2slave
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.5
fsL2VpnPwRedGroupDualHomeApps
Enables the reflection of the attachment circuit status onto both the
primary and secondary pseudowires. This condition is necessary if the
peer PEs are connected to a dual-homed device
Bitsr/w
Enumerated Values:
0lagg
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.6
fsL2VpnPwRedGroupName
The name given to the protection group entry. This object is used to
refer the protection group in addition to the protection group Id. The
default value for this object will be the null string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.7
fsL2VpnPwRedGroupStatus
This parameter indicate the current status of the PW Redundancy
Group.
Bits
Enumerated Values:
0forwardingNegotiaton
1switchoverNegotiaton
2negotiatonSuccess
3waitingToRestore
4redundancyUnAvailable
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.8
fsL2VpnPwRedGroupOperActivePw
This object is used for indicating the pseudo-wire which is currently
active in a PW Redundancy Group. This parameter will contain reference
to a valid pwEntry when one of the local PW is forwarding the user
traffic.
…
PW-TC-STD-MIBPwIndexOrZeroType
Textual Convention: PW-TC-STD-MIBPwIndexOrZeroType Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.9
fsL2VpnPwRedGroupWtrTimer
This column is used to configure the wait-to-restore timer for the
pseudowire redundancy group.

This column is used to configure the wait-to-restore timer for the
the revertive mode of operation. In the n…
Unsigned32r/w
Constraints:
range: 1-180
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.10
fsL2VpnPwRedGroupAdminCmd
This column is used by the operator to perform some administrative
operation. The operator requests a command by writing the command
value to this column.The action for the command issued may or maynot
happen depending…
Enumerationr/w
Enumerated Values:
1lockOutProtection
2clear
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.11
fsL2VpnPwRedGroupAdminActivePw
This object is used by the operator to forcefully switchover the
traffic to the specified pseudowire. This operation may or may-not
succeed depending on the redundancy state machine. Also if this value is
set, when the …
PW-TC-STD-MIBPwIndexOrZeroTyper/w
Textual Convention: PW-TC-STD-MIBPwIndexOrZeroType Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.12
fsL2VpnPwRedGroupAdminCmdStatus
This column indicates the status of the most recent administrative
command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd
object.
Enumeration
Enumerated Values:
1accepted
2notApplicable
3rejected
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.13
fsL2VpnPwRedGroupRowStatus
This object defines the status of this row. The valid option supported
for this table are 'createAndGo' and 'destroy'.Entries in this table
cannot be modified by the user when the row is active
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.4.1.1.14

fsL2VpnPwRedNodeTable

table
.1.3.6.1.4.1.10876.101.2.72.4.2 · 1 row entry · 7 columns
Open in standard view 
List of sibling PE nodes in PW Redundancy Group. For each node
corresponding TLDP entity also has to be created in
MPLS-LDP-STD-MIB::mplsLdpEntityTable.
fsL2VpnPwRedNodeEntry entry .1.3.6.1.4.1.10876.101.2.72.4.2.1
Information about a sibling PE node participating the same PW
Redundancy Group.
Indexes
fsL2VpnPwRedGroupIndex fsL2VpnPwRedNodeAddrType fsL2VpnPwRedNodeAddr
Column Syntax OID
fsL2VpnPwRedNodeAddrType
The type of the internetwork layer address used for ICCP handshaking.
This object indicates how the value of fsL2VpnPwRedNodeAddr is
to be interpreted. This parameter will be same as
MPLS-LDP-STD-MIB::mplsLdpEntityTarge…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.1
fsL2VpnPwRedNodeAddr
The value of the internetwork layer address used for the ICCP
handshaking. The value of fsL2VpnPwRedNodeAddrType specifies how
this address is to be interpreted. This parameter will be same as
MPLS-LDP-STD-MIB::mplsLdpE…
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.2
fsL2VpnPwRedNodeLocalLdpID
This read-only parameter indicates the currently used LDP session for
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.3
fsL2VpnPwRedNodeLocalLdpEntityIndex
This read-only parameter indicates the currently used LDP session for
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.4
fsL2VpnPwRedNodePeerLdpID
This read-only parameter indicates the currently used LDP session for
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.5
fsL2VpnPwRedNodeStatus
This read-only parameter indicates the sibling node status.
Bits
Enumerated Values:
0connected
1localSync
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.6
fsL2VpnPwRedNodeRowStatus
For creating, modifying, and deleting this row. None of the read-create
objects in the conceptual rows may be changed when this object is in
the active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.4.2.1.7

fsL2VpnPwRedPwTable

table
.1.3.6.1.4.1.10876.101.2.72.4.3 · 1 row entry · 6 columns
Open in standard view 
This tables gives the information of the pseudowires associated with 
a particular redundancy group and allows to modify/remove PWs in the 
group. The switching of active to standby will occur within the
pseudowires that are within the redundancy group.
          
This object is derived based on the drafts
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07).
fsL2VpnPwRedPwEntry entry .1.3.6.1.4.1.10876.101.2.72.4.3.1
This tables allows the user to configure the pseudowire parameters
specific to redundancy group.
Indexes
fsL2VpnPwRedGroupIndex fsL2VpnPwRedPwIndex
Column Syntax OID
fsL2VpnPwRedPwIndex
The pwIndex of a PW in Redundancy group
PW-TC-STD-MIBPwIndexOrZeroType
Textual Convention: PW-TC-STD-MIBPwIndexOrZeroType Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.1
fsL2VpnPwRedPwPreferance
The preference of the pseudowire. If the pseudowire is configured as
primary it has more chance of becoming active when more than one PW
qualify for secondary
Enumerationr/w
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.2
fsL2VpnPwRedPwLocalStatus
The pwLocalStatus of the PW including the preferential FORWARDING and
SWITCHOVER bit.
FsL2VpnPwStatus
Textual Convention: FsL2VpnPwStatus Bits
Type Values:
0pwNotForwarding
1servicePwRxFault
2servicePwTxFault
3psnPwRxFault
4psnPwTxFault
5pwForwardingStandby
6pwSwitchoverRequest
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.3
fsL2VpnPwRedPwRemoteStatus
This object indicates the PFS bit status received from the remote peer
via LDP signalling.
FsL2VpnPwStatus
Textual Convention: FsL2VpnPwStatus Bits
Type Values:
0pwNotForwarding
1servicePwRxFault
2servicePwTxFault
3psnPwRxFault
4psnPwTxFault
5pwForwardingStandby
6pwSwitchoverRequest
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.4
fsL2VpnPwRedPwOperStatus
This object indicates the PW operational status with the Preferential
Forwarding status under consideration. When PFS is indicates status as
'STANDBY' the OPER.STATUS will be 'dormant'.
PW-TC-STD-MIBPwOperStatusTC
Textual Convention: PW-TC-STD-MIBPwOperStatusTC Enumeration
Type Values:
1up
2down
3testing
4dormant
5notPresent
6lowerLayerDown
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.5
fsL2VpnPwRedPwRowStatus
For creating, modifying, and deleting this row. None of the read-create
objects in the conceptual rows may be changed when this object is in
the active(1) state
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.72.4.3.1.6

fsL2VpnPwRedIccpPwTable

table
.1.3.6.1.4.1.10876.101.2.72.4.4 · 1 row entry · 15 columns
Open in standard view 
This tables gives the information of the pseudowires associated with
a particular redundancy group and allows to modify/remove PWs in the
group. The switching of active to standby will occur within the
pseudowires that are within the redundancy group.
          
This object is derived based on the drafts
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07).
fsL2VpnPwRedIccpPwEntry entry .1.3.6.1.4.1.10876.101.2.72.4.4.1
This tables allows the user to configure the pseudowire parameters
specific to redundancy group.
Indexes
fsL2VpnPwRedIccpPwRgIndex fsL2VpnPwRedIccpPwHeadLsr fsL2VpnPwRedIccpPwFecType fsL2VpnPwRedIccpPwTailLsr fsL2VpnPwRedIccpPwGroup fsL2VpnPwRedIccpPwId fsL2VpnPwRedIccpPwAgiType fsL2VpnPwRedIccpPwAgi fsL2VpnPwRedIccpPwLocalAiiType fsL2VpnPwRedIccpPwLocalAii fsL2VpnPwRedIccpPwRemoteAiiType fsL2VpnPwRedIccpPwRemoteAii
Column Syntax OID
fsL2VpnPwRedIccpPwRgIndex SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.1
fsL2VpnPwRedIccpPwHeadLsr MPLS-TC-STD-MIBMplsLsrIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.2
fsL2VpnPwRedIccpPwFecType Enumeration
Enumerated Values:
1manual
2pwIdFecSignaling
3genFecSignaling
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.3
fsL2VpnPwRedIccpPwTailLsr MPLS-TC-STD-MIBMplsLsrIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.4
fsL2VpnPwRedIccpPwGroup PW-TC-STD-MIBPwGroupID
Textual Convention: PW-TC-STD-MIBPwGroupID Unsigned32
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.5
fsL2VpnPwRedIccpPwId PW-TC-STD-MIBPwIDType
Textual Convention: PW-TC-STD-MIBPwIDType Unsigned32
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.6
fsL2VpnPwRedIccpPwAgiType Enumeration
Enumerated Values:
1type1
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.7
fsL2VpnPwRedIccpPwAgi OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.8
fsL2VpnPwRedIccpPwLocalAiiType Enumeration
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.9
fsL2VpnPwRedIccpPwLocalAii OctetString
Constraints:
range: 4-12
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.10
fsL2VpnPwRedIccpPwRemoteAiiType Enumeration
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.11
fsL2VpnPwRedIccpPwRemoteAii OctetString
Constraints:
range: 4-12
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.12
fsL2VpnPwRedIccpPwRoId OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.13
fsL2VpnPwRedIccpPwPriority Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.14
fsL2VpnPwRedIccpPwStatus Bits
Enumerated Values:
0localForward
1localStandby
2localSwitchover
3remoteSwitchover
4remoteAwaited
6nodeSwitchover
7localUpdated
 .1.3.6.1.4.1.10876.101.2.72.4.4.1.15