fsL2VpnPwRedGroupOperActivePw

SUPERMICRO-L2VPN-MIB · .1.3.6.1.4.1.10876.101.2.72.4.1.1.9

MIB view Table view

Object

column PW-TC-STD-MIBPwIndexOrZeroType

This object is used for indicating the pseudo-wire which is currently
active in a PW Redundancy Group. This parameter will contain reference
to a valid pwEntry when one of the local PW is forwarding the user
traffic.
              
When none of the pseudo-wires qualify to be ACTIVE on this node; this
parameter shall indicate zero.This object is configured after the
PwSignaling is completed at L2VPN and when the active PW is selected.

Context

MIB: SUPERMICRO-L2VPN-MIB
OID: .1.3.6.1.4.1.10876.101.2.72.4.1.1.9
Type: column
Access: readonly
Status: current
Parent: fsL2VpnPwRedGroupEntry
Table: fsL2VpnPwRedGroupTable
Siblings: 13

Syntax

PW-TC-STD-MIBPwIndexOrZeroType

Source: PW-TC-STD-MIBPwIndexOrZeroType
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsL2VpnPwRedGroupIndex The unique identifier for the pseudowire redundancy protection group.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.1`
fsL2VpnPwRedGroupWtrTimer This column is used to configure the wait-to-restore timer for the pseudowire redundancy group. This column is used to configure the wait-to-restore timer for the t…	column	Unsigned32	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.10`
fsL2VpnPwRedGroupAdminCmd This column is used by the operator to perform some administrative operation. The operator requests a command by writing the command value to this column.The action for the comma…	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.11`
fsL2VpnPwRedGroupAdminActivePw This object is used by the operator to forcefully switchover the traffic to the specified pseudowire. This operation may or may-not succeed depending on the redundancy state machi…	column	PW-TC-STD-MIBPwIndexOrZeroType	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.12`
fsL2VpnPwRedGroupAdminCmdStatus This column indicates the status of the most recent administrative command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd object.	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.13`
fsL2VpnPwRedGroupRowStatus This object defines the status of this row. The valid option supported for this table are 'createAndGo' and 'destroy'.Entries in this table cannot be modified by the user when the…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.14`
fsL2VpnPwRedGroupProtType This object is used to indicate the protection architecture type of the redundancy group. Protection architecture types supported are give below: - 'onePlusOneWithL…	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.2`
fsL2VpnPwRedGroupReversionType This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shifted from the protecti…	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.3`
fsL2VpnPwRedGroupContentionResolutionMethod This object is used to indicate the mode of operation of the pseudo-wire group. If the mode is configured as independent then the PW endpoint nodes independently select which PW t…	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.4`
fsL2VpnPwRedGroupMasterSlaveMode This value is applicable only if the fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'. Then the user can specify if this group is acting as Master or Slave…	column	Enumeration	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.5`
fsL2VpnPwRedGroupDualHomeApps Enables the reflection of the attachment circuit status onto both the primary and secondary pseudowires. This condition is necessary if the peer PEs are connected to a dual-homed …	column	Bits	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.6`
fsL2VpnPwRedGroupName The name given to the protection group entry. This object is used to refer the protection group in addition to the protection group Id. The default value for this object will be t…	column	OctetString	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.7`
fsL2VpnPwRedGroupStatus This parameter indicate the current status of the PW Redundancy Group.	column	Bits	`.1.3.6.1.4.1.10876.101.2.72.4.1.1.8`