fsL2VpnPwRedGroupEntry
SUPERMICRO-L2VPN-MIB ·
.1.3.6.1.4.1.10876.101.2.72.4.1.1
Object
row
The PW Redundancy Group table entry. This table allows the user to configure the Redundancy Group related parameters. Once the redundancy entries are created then the pseudo-wires can be associated to each Group. The switching of data will be done within the pseudo-wires in a Redundancy entry
Context
- MIB
- SUPERMICRO-L2VPN-MIB
- OID
.1.3.6.1.4.1.10876.101.2.72.4.1.1- Type
- row
- Status
- current
- Parent
- fsL2VpnPwRedGroupTable
- Table
- fsL2VpnPwRedGroupTable
- Children
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsL2VpnPwRedGroupIndex The unique identifier for the pseudowire redundancy protection group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.72.4.1.1.1 |
| fsL2VpnPwRedGroupWtrTimer This column is used to configure the wait-to-restore timer for the
pseudowire redundancy group.
This column is used to configure the wait-to-restore timer for the
t… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.72.4.1.1.10 |
| fsL2VpnPwRedGroupAdminCmd This column is used by the operator to perform some administrative
operation. The operator requests a command by writing the command
value to this column.The action for the comma… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.11 |
| fsL2VpnPwRedGroupAdminActivePw This object is used by the operator to forcefully switchover the
traffic to the specified pseudowire. This operation may or may-not
succeed depending on the redundancy state machi… | column | PW-TC-STD-MIBPwIndexOrZeroType | .1.3.6.1.4.1.10876.101.2.72.4.1.1.12 |
| fsL2VpnPwRedGroupAdminCmdStatus This column indicates the status of the most recent administrative
command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd
object. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.13 |
| fsL2VpnPwRedGroupRowStatus This object defines the status of this row. The valid option supported
for this table are 'createAndGo' and 'destroy'.Entries in this table
cannot be modified by the user when the… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.72.4.1.1.14 |
| fsL2VpnPwRedGroupProtType This object is used to indicate the protection architecture type of the
redundancy group. Protection architecture types supported are give below:
- 'onePlusOneWithL… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.2 |
| fsL2VpnPwRedGroupReversionType This object is used to indicate the operation type/mode of the
protection group entry. If the value is set to 'revertive(1)', then
normal traffic will be shifted from the protecti… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.3 |
| fsL2VpnPwRedGroupContentionResolutionMethod This object is used to indicate the mode of operation of the
pseudo-wire group. If the mode is configured as independent then the PW
endpoint nodes independently select which PW t… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.4 |
| fsL2VpnPwRedGroupMasterSlaveMode This value is applicable only if the
fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'.
Then the user can specify if this group is acting as Master or Slave… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.72.4.1.1.5 |
| fsL2VpnPwRedGroupDualHomeApps Enables the reflection of the attachment circuit status onto both the
primary and secondary pseudowires. This condition is necessary if the
peer PEs are connected to a dual-homed … | column | Bits | .1.3.6.1.4.1.10876.101.2.72.4.1.1.6 |
| fsL2VpnPwRedGroupName The name given to the protection group entry. This object is used to
refer the protection group in addition to the protection group Id. The
default value for this object will be t… | column | OctetString | .1.3.6.1.4.1.10876.101.2.72.4.1.1.7 |
| fsL2VpnPwRedGroupStatus This parameter indicate the current status of the PW Redundancy
Group. | column | Bits | .1.3.6.1.4.1.10876.101.2.72.4.1.1.8 |
| fsL2VpnPwRedGroupOperActivePw This object is used for indicating the pseudo-wire which is currently
active in a PW Redundancy Group. This parameter will contain reference
to a valid pwEntry when one of the loc… | column | PW-TC-STD-MIBPwIndexOrZeroType | .1.3.6.1.4.1.10876.101.2.72.4.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsL2VpnPwRedGroupIndex The unique identifier for the pseudowire redundancy protection group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.72.4.1.1.1 |