SCHLEIFENBAUER-DATABUS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
138

sdbMgmtCtrlDevicesTable

table
.1.3.6.1.4.1.31034.12.1.1.1.2.4 · 1 row entry · 5 columns
Open in standard view 
A table containing information of devices connected to the databus.
The number of entries is given by the value of sdbMgmtStsDevices.
sdbMgmtCtrlDevicesEntry entry .1.3.6.1.4.1.31034.12.1.1.1.2.4.1
Information entry containing objects of a particular databus device.
Indexes
sdbMgmtCtrlDevIndex
Column Syntax OID
sdbMgmtCtrlDevIndex
A unique value for each device. Its value ranges between 1 and the
value of sdbMgmtStsDevices with a maximum of 255. The value for each
device will remain constant until the next scan is performed.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.31034.12.1.1.1.2.4.1.1
sdbMgmtCtrlDevUnitAddress
User defined address.
This will be used for addressing the device on the databus.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31034.12.1.1.1.2.4.1.2
sdbMgmtCtrlDevHardwareAddress
Hardware serial number.
This cannot be changed. It can be used as backup unit address.
format as 3 unsigned ints separated by dashes: int - int - int
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.31034.12.1.1.1.2.4.1.3
sdbMgmtCtrlDevIsNew
Indication if the device is new on the databus.
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.31034.12.1.1.1.2.4.1.4
sdbMgmtCtrlDevIsDuplicate
Indication if the device is conflicting with another device on the
databus.
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.31034.12.1.1.1.2.4.1.5

sdbDevIdTable

table
.1.3.6.1.4.1.31034.12.1.1.2.1.1 · 1 row entry · 16 columns
Open in standard view 
A table containing identification information of devices connected to
the databus.
The number of entries is given by the value of
sdbMgmtStsAddressableDevices.
sdbDevIdEntry entry .1.3.6.1.4.1.31034.12.1.1.2.1.1.1
Information entry containing information objects of a particular
databus device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevIdSPDMVersion
Data model version.
Integer32
Constraints:
range: 0-9999
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.1
sdbDevIdFirmwareVersion
The firmware revision number.
Integer32
Constraints:
range: 0-9999
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.2
sdbDevIdBuildNumber
Date and time the firmware was built.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.3
sdbDevIdSalesOrderNumber
SP sales order number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.4
sdbDevIdProductId
SP product id.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.5
sdbDevIdSerialNumber
SP serial number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.6
sdbDevIdHardwareAddress
Hardware serial number.
This can not be changed. It can be used as backup unit address.
Format as 3 unsigned ints separated by dashes (-)
e.g. 12345-54321-00000
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.7
sdbDevIdMacAddress
The MAC address.
This can not be changed. It represents an 802 MAC address as if it
were transmitted least significant bit first.
Format as six groups of 2 hexadecimal digits separated by colons (:)
e.g. D0:22:12:B0:00:…
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.8
sdbDevIdUnitAddress
User defined address.
This will be used for addressing the device on the databus.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.9
sdbDevIdName
User configurable device name or identifier.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.10
sdbDevIdLocation
User configurable device location identifier.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.11
sdbDevIdVanityTag
Characters to be displayed as vanity text in display.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.12
sdbDevIdIndex
A unique value for each device. Its value represents the unit address
of the device and is used to address individual devices in the tree.
The value for each device will remain constant until the next scan is
performed.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.13
sdbDevIdDeviceType
A unique value for each device group.
Its value represents the device type of the device.
Refer to manual for more information.
Enumeration
Enumerated Values:
0pdu
1dpm
2hpdu-G3
3dpm27e
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.14
sdbDevIdLocateUnit
The LCD-backlight flashes in a heartbeat rhythm to locate the unit.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.15
sdbDevIdConfigType
Wiring configuration type used.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.31034.12.1.1.2.1.1.1.16

sdbDevCfTable

table
.1.3.6.1.4.1.31034.12.1.1.2.2.1 · 1 row entry · 10 columns
Open in standard view 
A table containing configuration information of devices connected to
the databus.
The number of entries is given by the value of
sdbMgmtStsAddressableDevices.
sdbDevCfEntry entry .1.3.6.1.4.1.31034.12.1.1.2.2.1.1
Configuration entry containing configuration objects of a particular
databus device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevCfPhases
Number of phases for input metering.
Integer32
Constraints:
range: 3-3
range: 0-1
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.1
sdbDevCfOutletsTotal
Total number of outlets including hardwired without switch/metered
modules.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.2
sdbDevCfOutletsSwitched
Number of switched outlets.
If outlet numbering is non-contiguous its the highest outlet number.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.3
sdbDevCfOutletsMetered
Number of metered outlets.
If outlet numbering is non-contiguous its the highest outlet number.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.4
sdbDevCfSensors
The number sensors.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.5
sdbDevCfMaximumLoad
Maximum rated load of device per phase
AInteger32
Constraints:
range: 32-32
range: 16-16
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.6
sdbDevCfBranches
Number of branches for input metering.
Integer32
Constraints:
range: 0-6
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.7
sdbDevCfNeutral
Nuetral current measurement.
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.8
sdbDevCfTempSensors
Number of temperature sensors present in the system.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.9
sdbDevCfTotals
The number of totals rows for the configuration.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.2.1.1.10

sdbDevSsTable

table
.1.3.6.1.4.1.31034.12.1.1.2.3.1 · 1 row entry · 14 columns
Open in standard view 
A table containing system status information of devices connected to
the databus.
The number of entries is given by the value of
sdbMgmtStsAddressableDevices.
sdbDevSsEntry entry .1.3.6.1.4.1.31034.12.1.1.2.3.1.1
System status entry containing system status objects of a particular
databus device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevSsDeviceStatusCode
Returns an internal status or error code.
A value of 0 means OK.
If not 0 it can be any of the following codes. Multiple status codes
can be active at the same time. The value will be the sum of the
active status codes.…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.1
sdbDevSsTemperatureAlert
An alert has been raised due to temperature exceeding treshhold.
0 = no alert
1 = internal temperature sensor
2 = external temperature sensor
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.2
sdbDevSsInputCurrentAlert
An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding phase. 0 = no alert.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.3
sdbDevSsOutletCurrentAlert
An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding outlet. 0 = no alert.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.4
sdbDevSsInputVoltageAlert
An alert has been raised due to a voltage dip.
The value indicates the dipped phase. 0 = no alert.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.5
sdbDevSsOutletCurrentDropAlert
An alert has been raised due to the current of a metered outlet
suddenly dropping to near zero, possibly indicating a blown fuse.
The value indicates the dropped outlet. 0 = no alert.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.6
sdbDevSsInputCurrentDropAlert
An alert has been raised due to the current of a metered input
suddenly dropping to near zero, possibly indicating a blown fuse.
The value indicates the dropped phase. 0 = no alert.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.7
sdbDevSsSensorChangeAlert
An alert has been raised due to a change in the number of sensors.
The value indicates the previous amount of sensors.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.8
sdbDevSsOutletVoltageDropAlert
An alert has been raised due to voltage drop on this outlet.
The value indicates the first failed outlet.
Integer32
Constraints:
range: 0-54
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.9
sdbDevSsBranchCurrentAlert
An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding branch. 0 = no alert.
Integer32
Constraints:
range: 0-18
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.10
sdbDevSsBranchVoltageAlert
An alert has been raised due to a voltage dip.
The value indicates the dipped branch. 0 = no alert.
Integer32
Constraints:
range: 0-18
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.11
sdbDevSsNeutralCurrentAlert
An alert has been raised due to current exceeding treshhold.
0 = no alert
1 = current alert
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.12
sdbDevSsResidualCurrentAlert
A residual current alert has been raised.
0 = no alert
1 = current exceeding treshhold alert
2 = sensor error
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.13
sdbDevSsHardwareAlert
0 = no alarm >0 = or slave number for alert
Integer32
Constraints:
range: 0-9
 .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.14

sdbDevRsTable

table
.1.3.6.1.4.1.31034.12.1.1.2.4.1 · 1 row entry · 5 columns
Open in standard view 
A table providing reset capabilities to devices connected to the
databus.
The number of entries is given by the value of
sdbMgmtStsAddressableDevices.
sdbDevRsEntry entry .1.3.6.1.4.1.31034.12.1.1.2.4.1.1
Reset entry providing reset objects of a particular databus device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevRsReboot
Warm reboot/reset of device controller.
NOTE: this will have NO effect on outlet status!
Enumerationr/w
Enumerated Values:
0idle
1reboot
 .1.3.6.1.4.1.31034.12.1.1.2.4.1.1.1
sdbDevRsResetAlerts
Reset all alert signals and device status code.
Enumerationr/w
Enumerated Values:
0idle
1reset
 .1.3.6.1.4.1.31034.12.1.1.2.4.1.1.2
sdbDevRsZeroInputKWhSubtotal
Reset of all input kWh subtotal counters to zero.
Enumerationr/w
Enumerated Values:
0idle
1zero
 .1.3.6.1.4.1.31034.12.1.1.2.4.1.1.3
sdbDevRsZeroOutletKWhSubtotal
Reset of all outlet kWh subtotal counter to zero.
Enumerationr/w
Enumerated Values:
0idle
1zero
 .1.3.6.1.4.1.31034.12.1.1.2.4.1.1.4
sdbDevRsResetPeaksAndDips
Reset all peak and dip values to zero.
Enumerationr/w
Enumerated Values:
0idle
1reset
 .1.3.6.1.4.1.31034.12.1.1.2.4.1.1.5

sdbDevStTable

table
.1.3.6.1.4.1.31034.12.1.1.2.5.1 · 1 row entry · 13 columns
Open in standard view 
A table containing setting information of devices connected to the
databus.
The number of entries is given by the value of
sdbMgmtStsAddressableDevices.
sdbDevStEntry entry .1.3.6.1.4.1.31034.12.1.1.2.5.1.1
Setting entry containing settings objects of a particular databus
device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevStAutoResetAlerts
Auto reset alerts configuration.
If set to 0 the auto reset alerts feature is disabled. If set to a
value greater then 0, the auto reset alerts feature is enabled and
alerts will get cleared after the configured amount …
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.2
sdbDevStExtendedNames
Use original or longer names for inputs, outlets and sensors.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.3
sdbDevStPeakDuration
Amount of ms a current peak should last before an alert is raised.
msInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.4
sdbDevStFixedOutletDelay
Minimal delay between two successive relay switches in milliseconds.
Minimal delay is 100 ms. Will always be respected!
msInteger32r/w
Constraints:
range: 100-65535
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.5
sdbDevStPowerSaverMode
Set backlight on time in seconds.
0 keeps display always on.
Note that keeping the backlight on may decrease luminosity over time.
sInteger32r/w
Constraints:
range: 120-120
range: 240-240
range: 60-60
range: 10-10
range: 0-0
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.6
sdbDevStOutletPowerUpMode
Behaviour of outlets on power-up.
Enumerationr/w
Enumerated Values:
0off
1sameState
2sameStateDelayed
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.7
sdbDevStMaximumTemperature
Maximum temperature threshold
An alert will be generated whenever the temperature is above this
value. Zero means disabled.
degrees CelsiusInteger32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.8
sdbDevStDisplayOrientation
Display orientation.
Enumerationr/w
Enumerated Values:
0noDisplay
1verticalDisplayOnTop
2verticalDisplayUpsideDown
3horizontalDisplayAtLeft
4horizontalDisplayAtRight
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.9
sdbDevStLocalAlertReset
Allow alerts to be reset locally on device by pushing one of the
buttons.
Enumerationr/w
Enumerated Values:
0notAllowed
1allowed
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.10
sdbDevStCurrentDropDetection
Enables the current drop detection function.
Enumerationr/w
Enumerated Values:
0off
1inputsOnly
2outletsOnly
3inputsAndOutlets
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.11
sdbDevStUsbMode
Allow the USB port to be used for specific tasks
Enumerationr/w
Enumerated Values:
0usbDisabled
1onlyFirmwareUpdates
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.13
sdbDevStSensorChangeAlertMode
Enable sensoe change alerts
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.14
sdbDevStOutletUnlockOverride
Overrides the timeout. If this is set to 1 then the timeout will be ignored, otherwise the timeout will be taken into account.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.31034.12.1.1.2.5.1.1.15

sdbDevInTable

table
.1.3.6.1.4.1.31034.12.1.1.2.6.1 · 1 row entry · 14 columns
Open in standard view 
A table containing information of inputs of devices connected to the
databus.
sdbDevInEntry entry .1.3.6.1.4.1.31034.12.1.1.2.6.1.1
Inputs entry containing objects of an input of a particular databus
device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevInIndex to identify a particular input
of the dev…
Indexes
sdbDevIdIndex sdbDevInIndex
Column Syntax OID
sdbDevInIndex
A unique value for each input. Its value ranges between 1 and the
value of sdbDevCfPhases.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.1
sdbDevInKWhTotal
Total kWh value of an input. This value can not be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.2
sdbDevInKWhSubtotal
Subtotal kWh value of an input. This value can be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.3
sdbDevInPowerFactor
Power factor of input.
The power factor of an AC power system is defined as the ratio of the
real or active power to the apparent power and is a number between 0
and 1. This value is expressed as a percentage between 0%…
%CentiPercent
Textual Convention: CentiPercent Integer32
Type Constraints:
range: 0..10000
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.4
sdbDevInActualCurrent
Actual apparent, RMS current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.5
sdbDevInPeakCurrent
Peak apparent, RMS current.
Highest value since last reset of the alerts.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.6
sdbDevInActualVoltage
The actual voltage.
VCentiVolt
Textual Convention: CentiVolt Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.7
sdbDevInMinVoltage
RMS voltage dip.
Lowest value since reset of alerts.
VCentiVolt
Textual Convention: CentiVolt Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.8
sdbDevInPowerVoltAmpere
Calculated apparent power.
VAInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.9
sdbDevInPowerWatt
Calculated real power.
WInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.10
sdbDevInMaxAmps
Maximum current per input phase.
Should last at least sdbDevStPeakDuration ms before triggering an
alert.
ACentiAmperer/w
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.11
sdbDevInCTRatio
The multiplier to use for the input CTs.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.12
sdbDevInName
User configurable naming of inputs or phases.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.13
sdbDevInZeroKWhSubtotal
Reset input kWh subtotal counter of a single input to zero.
Enumerationr/w
Enumerated Values:
0idle
1zero
 .1.3.6.1.4.1.31034.12.1.1.2.6.1.1.14

sdbDevOutTable

table
.1.3.6.1.4.1.31034.12.1.1.2.7.1 · 1 row entry · 2 columns
Open in standard view 
A table containing information of outlets of devices connected to the
databus.
sdbDevOutEntry entry .1.3.6.1.4.1.31034.12.1.1.2.7.1.1
Outlets entry containing objects of an outlet of a particular databus
device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevOutIndex to identify a particular outlet
of the…
Indexes
sdbDevIdIndex sdbDevOutIndex
Column Syntax OID
sdbDevOutIndex
A unique value for each outlet. Its value ranges between 1 and the
value of sdbDevCfOutletsTotal.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.7.1.1.1
sdbDevOutName
User configurable naming of individual outlets.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.31034.12.1.1.2.7.1.1.2

sdbDevOutMtTable

table
.1.3.6.1.4.1.31034.12.1.1.2.7.2 · 1 row entry · 11 columns
Open in standard view 
A table containing information of metered outlets of devices connected
to the databus.
sdbDevOutMtEntry entry .1.3.6.1.4.1.31034.12.1.1.2.7.2.1
Metered outlets entry containing objects of a metered outlet of a
particular databus device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevOutMtIndex to identify a particu…
Indexes
sdbDevIdIndex sdbDevOutMtIndex
Column Syntax OID
sdbDevOutMtIndex
A unique value for each outlet. Its value ranges between 1 and the
value of sdbDevCfOutletsMetered.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.1
sdbDevOutMtKWhTotal
Total kWh value of an outlet. This value can not be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.2
sdbDevOutMtKWhSubtotal
Subotal kWh value of an outlet. This value can be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.3
sdbDevOutMtPowerFactor
Power factor of outlet.
The power factor of an AC power system is defined as the ratio of the
real or active power to the apparent power and is a number between 0
and 1. This number is expressed as a percentage between …
%CentiPercent
Textual Convention: CentiPercent Integer32
Type Constraints:
range: 0..10000
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.4
sdbDevOutMtActualCurrent
Actual apparent, RMS current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.5
sdbDevOutMtPeakCurrent
Peak apparent, RMS current.
Highest value since last reset of the alerts.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.6
sdbDevOutMtActualVoltage
Actual voltage on outlet.
VCentiVolt
Textual Convention: CentiVolt Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.7
sdbDevOutMtMaxAmps
Maximum current per outlet.
Should last at least sdbDevStPeakDuration ms before triggering an
alert.
ACentiAmperer/w
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.8
sdbDevOutMtCTRatio
The multiplier to use for the outlet CTs.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.9
sdbDevOutMtPowerVoltAmpere
Calculated apparent power.
VAInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.10
sdbDevOutMtPowerWatt
Calculated real power.
WInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.7.2.1.11

sdbDevOutSwTable

table
.1.3.6.1.4.1.31034.12.1.1.2.7.3 · 1 row entry · 6 columns
Open in standard view 
A table containing information of switched outlets of devices
connected to the databus.
sdbDevOutSwEntry entry .1.3.6.1.4.1.31034.12.1.1.2.7.3.1
Switched outlets entry containing objects of a switched outlet of a
particular databus device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevOutSwIndex to identify a parti…
Indexes
sdbDevIdIndex sdbDevOutSwIndex
Column Syntax OID
sdbDevOutSwIndex
A unique value for each outlet. Its value ranges between 1 and the
value of sdbDevCfOutletsSwitched.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.1
sdbDevOutSwCurrentState
The actual state of the outlet relay.
Note that Writing is only effective after setting sdbDevOutSwUnlock.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.2
sdbDevOutSwScheduled
A one indicates pending activity; the switch delay has not yet
expired.
Enumeration
Enumerated Values:
0idle
1scheduled
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.3
sdbDevOutSwUnlock
Switching and rebooting is unlocked for 10 seconds by writing a 1.
Enumerationr/w
Enumerated Values:
0locked
1unlocked
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.4
sdbDevOutSwIndividualOutletDelay
Delay before an individual outlet switches on at power-up.
sInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.5
sdbDevOutSwReboot
Reboot outlet relay if current state is on and outlet is unlocked;
The outlet will be turned on after 10 seconds.
Enumerationr/w
Enumerated Values:
0idle
1reboot
 .1.3.6.1.4.1.31034.12.1.1.2.7.3.1.6

sdbDevMeasuresTable

table
.1.3.6.1.4.1.31034.12.1.1.2.8.1 · 1 row entry · 6 columns
Open in standard view 
A table containing information of temperatures of devices connected to
the databus.
sdbDevMeasuresEntry entry .1.3.6.1.4.1.31034.12.1.1.2.8.1.1
Device measures entry containing temperature information objects of a
particular databus device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevMsIntTemperature
Actual internal device temperature in deg C
degrees CelsiusCentiCelsius
Textual Convention: CentiCelsius Integer32
Type Constraints:
range: 0..9900
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.1
sdbDevMsExtTemperature
Actual external device temperature sensor in deg C.
degrees CelsiusCentiCelsius
Textual Convention: CentiCelsius Integer32
Type Constraints:
range: 0..9900
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.2
sdbDevMsIntTemperaturePeak
Peak internal device temperature since last reset of alerts.
degrees CelsiusCentiCelsius
Textual Convention: CentiCelsius Integer32
Type Constraints:
range: 0..9900
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.3
sdbDevMsExtTemperaturePeak
Peak external device temperature since last reset of alerts.
degrees CelsiusCentiCelsius
Textual Convention: CentiCelsius Integer32
Type Constraints:
range: 0..9900
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.4
sdbDevMsResidualCurrent
Residual current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.5
sdbDevMsResidualPeak
Peak residual current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.8.1.1.6

sdbDevSnsTable

table
.1.3.6.1.4.1.31034.12.1.1.2.8.2 · 1 row entry · 4 columns
Open in standard view 
A table containing information of sensors of devices connected to the
databus.
sdbDevSnsEntry entry .1.3.6.1.4.1.31034.12.1.1.2.8.2.1
Sensors entry containing objects of a sensor of a particular databus
device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevSnsIndex to identify a particular sensor
of the …
Indexes
sdbDevIdIndex sdbDevSnsIndex
Column Syntax OID
sdbDevSnsIndex
A unique value for each sensor. Its value ranges between 1 and the
value of sdbDevCfSensors.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.31034.12.1.1.2.8.2.1.1
sdbDevSnsType
Type of connected sensor.
T = Temperature (C)
H = Humidity (%)
I = dry switch contact
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.31034.12.1.1.2.8.2.1.2
sdbDevSnsValue
Value of connected sensor
Integer32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.8.2.1.3
sdbDevSnsName
User definable name for sensors.
OctetStringr/w
Constraints:
range: 0-18
 .1.3.6.1.4.1.31034.12.1.1.2.8.2.1.4

sdbDevPerformanceTable

table
.1.3.6.1.4.1.31034.12.1.1.2.9.1 · 1 row entry · 5 columns
Open in standard view 
A table containing information of sensors of devices connected to the
databus.
sdbDevPerformanceEntry entry .1.3.6.1.4.1.31034.12.1.1.2.9.1.1
Performance counters of a particular databus device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevPerformanceIndex to identify a particular counter
of the device identifi…
Indexes
sdbDevIdIndex sdbDevPerformanceIndex
Column Syntax OID
sdbDevPerformanceIndex
A unique value for each counter. Its value ranges between 1 and 16.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.31034.12.1.1.2.9.1.1.1
sdbDevPerformanceValue
Value of counter
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.31034.12.1.1.2.9.1.1.2
sdbDevPerformanceMax
Max of counter
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.31034.12.1.1.2.9.1.1.3
sdbDevPerformanceLimit
Limit of counter
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.31034.12.1.1.2.9.1.1.4
sdbDevPerformanceName
User definable name for counter.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.31034.12.1.1.2.9.1.1.5

sdbDevPerformanceResetTable

table
.1.3.6.1.4.1.31034.12.1.1.2.9.2 · 1 row entry · 2 columns
Open in standard view 
A table containing the last reset reason of the device
sdbDevPerformanceResetEntry entry .1.3.6.1.4.1.31034.12.1.1.2.9.2.1
Setting entry containing settings objects of a particular databus
device.
Indexes
sdbDevIdIndex
Column Syntax OID
sdbDevPerformanceResetReason
Last reset reason.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.31034.12.1.1.2.9.2.1.1
sdbDevResetUptime
Uptime before last reset
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31034.12.1.1.2.9.2.1.2

sdbDevBranchTable

table
.1.3.6.1.4.1.31034.12.1.1.2.10.1 · 1 row entry · 14 columns
Open in standard view 
A table containing information of inputs of devices connected to the
databus.
sdbDevBranchEntry entry .1.3.6.1.4.1.31034.12.1.1.2.10.1.1
Inputs entry containing objects of an input of a particular databus
device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevBranchIndex to identify a particular input
of the…
Indexes
sdbDevIdIndex sdbDevBranchIndex
Column Syntax OID
sdbDevBranchIndex
A unique value for each input. Its value ranges between 1 and the
value of sdbDevCfPhases.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.1
sdbDevBranchKWhTotal
Total kWh value of an input. This value can not be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.2
sdbDevBranchKWhSubtotal
Subtotal kWh value of an input. This value can be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.3
sdbDevBranchPowerFactor
Power factor of input.
The power factor of an AC power system is defined as the ratio of the
real or active power to the apparent power and is a number between 0
and 1. This value is expressed as a percentage between 0%…
%CentiPercent
Textual Convention: CentiPercent Integer32
Type Constraints:
range: 0..10000
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.4
sdbDevBranchActualCurrent
Actual apparent, RMS current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.5
sdbDevBranchPeakCurrent
Peak apparent, RMS current.
Highest value since last reset of the alerts.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.6
sdbDevBranchActualVoltage
The actual voltage.
VCentiVolt
Textual Convention: CentiVolt Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.7
sdbDevBranchMinVoltage
RMS voltage dip.
Lowest value since reset of alerts.
VCentiVolt
Textual Convention: CentiVolt Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.8
sdbDevBranchPowerVoltAmpere
Calculated apparent power.
VAInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.9
sdbDevBranchPowerWatt
Calculated real power.
WInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.10
sdbDevBranchMaxAmps
Maximum current per input phase.
Should last at least sdbDevStPeakDuration ms before triggering an
alert.
ACentiAmperer/w
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.11
sdbDevBranchCTRatio
The multiplier to use for the input CTs.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.12
sdbDevBranchName
User configurable naming of branches.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.13
sdbDevBranchZeroKWhSubtotal
Reset input kWh subtotal counter of a single input to zero.
Enumerationr/w
Enumerated Values:
0idle
1zero
 .1.3.6.1.4.1.31034.12.1.1.2.10.1.1.14

sdbDevTotalsTable

table
.1.3.6.1.4.1.31034.12.1.1.2.11.1 · 1 row entry · 11 columns
Open in standard view 
A table containing information of inputs of devices connected to the
databus.
sdbDevTotalsEntry entry .1.3.6.1.4.1.31034.12.1.1.2.11.1.1
Inputs entry containing objects of an input of a particular databus
device.
Note that this table has two indexes. sdbDevIdIndex to identify a
particular device and sdbDevTotalsIndex to identify a particular input
of the…
Indexes
sdbDevIdIndex sdbDevTotalsIndex
Column Syntax OID
sdbDevTotalsIndex
A unique value for each input. Its value ranges between 1 and the
value of sdbDevCfPhases.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.1
sdbDevTotalsKWhTotal
Total kWh value of an input. This value can not be reset.
kWhKiloWattHour
Textual Convention: KiloWattHour Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.2
sdbDevTotalsPowerFactor
Power factor of input.
The power factor of an AC power system is defined as the ratio of the
real or active power to the apparent power and is a number between 0
and 1. This value is expressed as a percentage between 0%…
%CentiPercent
Textual Convention: CentiPercent Integer32
Type Constraints:
range: 0..10000
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.3
sdbDevTotalsActualCurrent
Actual apparent, RMS current.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.4
sdbDevTotalsPeakCurrent
Peak apparent, RMS current.
Highest value since last reset of the alerts.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.5
sdbDevTotalsPowerVoltAmpere
Calculated apparent power.
VAInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.6
sdbDevTotalsPowerWatt
Calculated real power.
WInteger32
Constraints:
range: 0-327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.7
sdbDevTotalsNeutralCurrent
Neutral current of phases.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.8
sdbDevTotalsNeutralPeak
Peak neutral current of phases.
ACentiAmpere
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.9
sdbDevTotalsNeutralMaxAmps
Maximum neutral current.
Should last at least sdbDevStPeakDuration ms before triggering an
alert.
ACentiAmperer/w
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.10
sdbDevTotalsResidualMaxAmps
Maximum residual current.
Should last at least sdbDevStPeakDuration ms before triggering an
alert.
ACentiAmperer/w
Textual Convention: CentiAmpere Integer32
Type Constraints:
range: 0..327680
 .1.3.6.1.4.1.31034.12.1.1.2.11.1.1.11