sdbDevSsDeviceStatusCode
SCHLEIFENBAUER-DATABUS-MIB ·
.1.3.6.1.4.1.31034.12.1.1.2.3.1.1.1
Object
column
Integer32
Returns an internal status or error code.
A value of 0 means OK.
If not 0 it can be any of the following codes. Multiple status codes
can be active at the same time. The value will be the sum of the
active status codes.
1 = alert flagged
2 = settings(s) initialized
4 = power-on reset
8 = external reset
16 = watchdog timer caused reset
32 = brownout detected
64 = controller error
128 = slave module was reset
Context
- MIB
- SCHLEIFENBAUER-DATABUS-MIB
- OID
.1.3.6.1.4.1.31034.12.1.1.2.3.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sdbDevSsEntry
- Table
- sdbDevSsTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdbDevSsBranchCurrentAlert An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding branch. 0 = no alert. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.10 |
| sdbDevSsBranchVoltageAlert An alert has been raised due to a voltage dip.
The value indicates the dipped branch. 0 = no alert. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.11 |
| sdbDevSsNeutralCurrentAlert An alert has been raised due to current exceeding treshhold.
0 = no alert
1 = current alert | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.12 |
| sdbDevSsResidualCurrentAlert A residual current alert has been raised.
0 = no alert
1 = current exceeding treshhold alert
2 = sensor error | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.13 |
| sdbDevSsHardwareAlert 0 = no alarm >0 = or slave number for alert | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.14 |
| sdbDevSsTemperatureAlert An alert has been raised due to temperature exceeding treshhold.
0 = no alert
1 = internal temperature sensor
2 = external temperature sensor | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.2 |
| sdbDevSsInputCurrentAlert An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding phase. 0 = no alert. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.3 |
| sdbDevSsOutletCurrentAlert An alert has been raised due to current exceeding treshhold.
The value indicates the exceeding outlet. 0 = no alert. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.4 |
| sdbDevSsInputVoltageAlert An alert has been raised due to a voltage dip.
The value indicates the dipped phase. 0 = no alert. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.5 |
| sdbDevSsOutletCurrentDropAlert An alert has been raised due to the current of a metered outlet
suddenly dropping to near zero, possibly indicating a blown fuse.
The value indicates the dropped outlet. 0 = no al… | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.6 |
| sdbDevSsInputCurrentDropAlert An alert has been raised due to the current of a metered input
suddenly dropping to near zero, possibly indicating a blown fuse.
The value indicates the dropped phase. 0 = no aler… | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.7 |
| sdbDevSsSensorChangeAlert An alert has been raised due to a change in the number of sensors.
The value indicates the previous amount of sensors. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.8 |
| sdbDevSsOutletVoltageDropAlert An alert has been raised due to voltage drop on this outlet.
The value indicates the first failed outlet. | column | Integer32 | .1.3.6.1.4.1.31034.12.1.1.2.3.1.1.9 |