SAF-IPRADIO Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
45

radioTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10 · 1 row entry · 10 columns
Open in standard view 
Radio table.
radioEntry entry .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1
Entry containing objects in radio table.
Indexes
radioIndex
Column Syntax OID
radioIndex mandatory
A unique value for each radio.
Its value represents UNIT:
1 - for 'local';
2 - for 'remote'
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.1
radioGenStatus mandatory
A General status of each radio:
1 - 'OK';
2 - 'error'
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.2
radioSide mandatory
Side for duplex communication.
Enumerationr/w
Enumerated Values:
1high
2low
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.3
radioTxPower mandatory
Tx power of radio transmitter in dBm.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.4
radioRxLevel mandatory
Received signal level in dBm.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.5
radioDuplexShift mandatory
Utilized duplex shift in KHz.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.6
radioLoopback mandatory
Radio loopback on/off. To set use
loopback command.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.7
radioTxMute mandatory
Status of 'Tx mute':
1 - Tx is muted;
2 - Tx is not muted.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.8
radioTxFrequency mandatory
Tx frequency in kHz.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.9
radioRxFrequency mandatory
Rx frequency in kHz.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.10

aTPCTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11 · 1 row entry · 3 columns
Open in standard view 
ATPC table
aTPCEntry entry .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1
Entry containing objects in ATPC table.
Indexes
atpcIndex
Column Syntax OID
atpcIndex mandatory
Its value represents UNIT
1 for 'local';
2 for 'remote'.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.1
atpcEnabled mandatory
ATPC status:
1 for 'on';
2 for 'off'.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.2
atpcTxPowerCorrection mandatory
ATPC Tx power correction in dBm.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.3

modemTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12 · 1 row entry · 23 columns
Open in standard view 
CFIP modem table.
modemEntry entry .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1
Entry containing objects in modem table.
Indexes
modemIndex
Column Syntax OID
modemIndex mandatory
Value represents UNIT:
1 for local;
2 for remote.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1
modemGeneralStatus mandatory
A General status of each modem:
1 - 'OK';
2 - 'error'
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2
modemBandwith mandatory
Modem bandwidth set in KHz.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3
modemE1T1Channels mandatory
Number of E1 or T1 channels set.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4
modemModulation mandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumeration
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5
modemTotalCapacity mandatory
Total capacity set in Kbps.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6
modemEthernetCapacity mandatory
Ethernet capacity set in Kbps.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7
modemAcqStatus mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8
modemLastAcqError mandatory Enumeration
Enumerated Values:
1success
2erragc
3errtiming
4errfreqsweep
5errmse
6errbit
7errservice
8errblind
9errtimeout
10errstopped
11errfatal
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9
modemRadialMSE mandatory
Radial mean square error value *10 in dB.
Radial MSE is a method for estimating the
signal to noise ratio. ACM engine uses
normalized MSE, which is the inverse of SNR.
It is calculated by dividing the estima…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10
modemInternalAGCgain mandatory
dBm
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11
modemCarrierOffset mandatory
Carrier frequency offset in Hz.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12
modemSymbolRateTx mandatory
kHz
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13
modemSymbolRateRx mandatory
kHz
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14
modemLDPCdecoderStress mandatory
The load of LDPC (low-density
parity-check code) decoder.
The LDPC is monitored for the number
of errors being corrected on the input
of LDPC decoder.
LDPC stress value thresholds @ BER 1.0e-06:
- for standard se…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15
modemACMengine mandatory
Status of ACM engine. When 'on',
value '1' is shown, when 'off' - value is '2'.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16
modemACMmodulationMin mandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumerationr/w
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17
modemACMtotalCapacity mandatory
Total capacity in Kbps set by ACM.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18
modemACMethernetCapacity mandatory
Ethernet capacity in Kbps set by ACM.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19
modemStandard mandatory
Modem operational standard ETSI or ANSI
Enumerationr/w
Enumerated Values:
1etsi
2ansi
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20
modemE1T1ChannelMask mandatory
E1 or T1 channel mask 0x00 - 0x0f
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21
modemACMmodulationMax mandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumerationr/w
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22
modemRowStatus mandatory
Row status - to update written data for
modemBandwith,
modemACMmodulationMin,
modemACMmodulationMax,
modemE1T1ChannelMask.
Enumerationr/w
Enumerated Values:
1active
3notReady
4undo
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23

vlanTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14 · 1 row entry · 6 columns
Open in standard view 
Vlan table
vlanEntry entry .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1
entry containing vlan objects
Indexes
No indexes recorded
Column Syntax OID
vlanNumber mandatory
A unique value for each vlan.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.1
vlanPortType mandatory
VLAN port type
management, traffic or endpoint
Enumerationr/w
Enumerated Values:
1management
2none
3traffic
4endpoint
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.2
vlanPortmap mandatory
display port bindings
bitfield 111(bin)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.3
vlanFid optional
a filtering identifier (assigned automagically)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.4
vlanCfgStat mandatory
enable/disable vlan # or clear row data
Enumerationr/w
Enumerated Values:
1enable
2disable
3clear
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.5
vlanRowStatus mandatory
Row status (execute configuration on active)
Changing any table value sets this value into
state notReady. To update row status write value
active(1) into this variable.
Enumerationr/w
Enumerated Values:
1active
3notReady
4undo
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.6

e1t1StatTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.3.3 · 1 row entry · 3 columns
Open in standard view 
E1 (T1) status Table.
e1t1StatEntry entry .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1
Entry containing objects in E1 (T1) table
Indexes
No indexes recorded
Column Syntax OID
e1t1LOS mandatory
if signal loss present
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.1
e1t1AIS mandatory
if AIS present
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.2
e1t1ChannelNr mandatory
e1 channel number (it is not associated with interface number - ifEntry)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.3