modemACMmodulationMax
SAF-IPRADIO ·
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22
Object
column
mandatory
r/w
Enumeration
Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide band and ACM calculates as (modulation + 8*is_wide + 16*is_ACM). Note: as PSK modulations are now physicaly deprecated, theese are replased with QAM, so for new QAM modulations there are modificatior +32. Note: not all of listed modulations supported by hardware. Plese check manual.
Context
- MIB
- SAF-IPRADIO
- OID
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- modemEntry
- Table
- modemTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | qpsk |
2 | psk8 |
3 | qam16 |
4 | qam32 |
5 | qam64 |
6 | qam128 |
7 | qam256 |
8 | qpsklimited |
9 | wqpsk |
10 | wpsk8 |
11 | wqam16 |
12 | wqam32 |
13 | wqam64 |
14 | wqam128 |
15 | wqam256 |
17 | acmqpsk |
18 | acmpsk8 |
19 | acmqam16 |
20 | acmqam32 |
21 | acmqam64 |
22 | acmqam128 |
23 | acmqam256 |
25 | acmwqpsk |
26 | acmwpsk8 |
27 | acmwqam16 |
28 | acmwqam32 |
29 | acmwqam64 |
30 | acmwqam128 |
31 | acmwqam256 |
33 | qam4 |
34 | qam8 |
40 | qam4limited |
41 | wqam4 |
42 | wqam8 |
49 | acmqam4 |
50 | acmqam8 |
57 | acmwqam4 |
58 | acmwqam8 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modemIndex mandatory Value represents UNIT:
1 for local;
2 for remote. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1 |
| modemRadialMSE mandatory Radial mean square error value *10 in dB.
Radial MSE is a method for estimating the
signal to noise ratio. ACM engine uses
normalized MSE, which is the inverse of SNR.
… | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10 |
| modemInternalAGCgain mandatory dBm | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11 |
| modemCarrierOffset mandatory Carrier frequency offset in Hz. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12 |
| modemSymbolRateTx mandatory kHz | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13 |
| modemSymbolRateRx mandatory kHz | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14 |
| modemLDPCdecoderStress mandatory The load of LDPC (low-density
parity-check code) decoder.
The LDPC is monitored for the number
of errors being corrected on the input
of LDPC decoder.
LDPC stress value thres… | column | OctetString | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15 |
| modemACMengine mandatory Status of ACM engine. When 'on',
value '1' is shown, when 'off' - value is '2'. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16 |
| modemACMmodulationMin mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band a… | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17 |
| modemACMtotalCapacity mandatory Total capacity in Kbps set by ACM. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18 |
| modemACMethernetCapacity mandatory Ethernet capacity in Kbps set by ACM. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19 |
| modemGeneralStatus mandatory A General status of each modem:
1 - 'OK';
2 - 'error' | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2 |
| modemStandard mandatory Modem operational standard ETSI or ANSI | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20 |
| modemE1T1ChannelMask mandatory E1 or T1 channel mask 0x00 - 0x0f | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21 |
| modemRowStatus mandatory Row status - to update written data for
modemBandwith,
modemACMmodulationMin,
modemACMmodulationMax,
modemE1T1ChannelMask. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23 |
| modemBandwith mandatory Modem bandwidth set in KHz. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3 |
| modemE1T1Channels mandatory Number of E1 or T1 channels set. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4 |
| modemModulation mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band a… | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5 |
| modemTotalCapacity mandatory Total capacity set in Kbps. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6 |
| modemEthernetCapacity mandatory Ethernet capacity set in Kbps. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7 |
| modemAcqStatus mandatory | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8 |
| modemLastAcqError mandatory | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9 |