modemStandard
SAF-IPRADIO ·
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20
Object
column
mandatory
r/w
Enumeration
Modem operational standard ETSI or ANSI
Context
- MIB
- SAF-IPRADIO
- OID
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- modemEntry
- Table
- modemTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | etsi |
2 | ansi |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modemIndex mandatory Value represents UNIT:
1 for local;
2 for remote. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1 |
| modemRadialMSE mandatory Radial mean square error value *10 in dB.
Radial MSE is a method for estimating the
signal to noise ratio. ACM engine uses
normalized MSE, which is the inverse of SNR.
… | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10 |
| modemInternalAGCgain mandatory dBm | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11 |
| modemCarrierOffset mandatory Carrier frequency offset in Hz. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12 |
| modemSymbolRateTx mandatory kHz | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13 |
| modemSymbolRateRx mandatory kHz | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14 |
| modemLDPCdecoderStress mandatory The load of LDPC (low-density
parity-check code) decoder.
The LDPC is monitored for the number
of errors being corrected on the input
of LDPC decoder.
LDPC stress value thres… | column | OctetString | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15 |
| modemACMengine mandatory Status of ACM engine. When 'on',
value '1' is shown, when 'off' - value is '2'. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16 |
| modemACMmodulationMin mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band a… | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17 |
| modemACMtotalCapacity mandatory Total capacity in Kbps set by ACM. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18 |
| modemACMethernetCapacity mandatory Ethernet capacity in Kbps set by ACM. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19 |
| modemGeneralStatus mandatory A General status of each modem:
1 - 'OK';
2 - 'error' | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2 |
| modemE1T1ChannelMask mandatory E1 or T1 channel mask 0x00 - 0x0f | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21 |
| modemACMmodulationMax mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band a… | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22 |
| modemRowStatus mandatory Row status - to update written data for
modemBandwith,
modemACMmodulationMin,
modemACMmodulationMax,
modemE1T1ChannelMask. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23 |
| modemBandwith mandatory Modem bandwidth set in KHz. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3 |
| modemE1T1Channels mandatory Number of E1 or T1 channels set. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4 |
| modemModulation mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band a… | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5 |
| modemTotalCapacity mandatory Total capacity set in Kbps. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6 |
| modemEthernetCapacity mandatory Ethernet capacity set in Kbps. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7 |
| modemAcqStatus mandatory | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8 |
| modemLastAcqError mandatory | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9 |