RC-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

265

rcPortTable

table

.1.3.6.1.4.1.2272.1.4.10.1 · 1 row entry · 128 columns

Open in standard view

Port table

rcPortEntry entry .1.3.6.1.4.1.2272.1.4.10.1.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column Syntax OID

rcPortIndex

An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.1

rcPortType

Port type

Enumeration

Enumerated Values:

0	other
1	rc100BaseTX
2	rc100BaseT2
3	rc100BaseF
4	rc1000BaseF
5	rc1000BaseDualF
6	rc10BaseF
7	rcPosMMF
8	rcPosSMF
9	rcAtm
10	rcGbicLx
11	rcGbicSx
12	rcGbicXd
13	rcGbicCu
14	rcGbicOther
15	rcOc3cSM
16	rcOc3cMM
17	rcOc3cCOPPER
18	rcOc12cSM
19	rcOc12cMM
20	rcDs3
21	rcE3
22	rcGbicNone
23	rc1000BaseT
24	rcGbicZx
25	rcOc3cAtmSM
26	rcOc3cAtmMM
27	rcOc12cAtmSM
28	rcOc12cAtmMM
29	rcOc3cPosSM
30	rcOc3cPosMM
31	rcOc12cPosSM
32	rcOc12cPosMM
33	rcGbic1470
34	rcGbic1490
35	rcGbic1510
36	rcGbic1530
37	rcGbic1550
38	rcGbic1570
39	rcGbic1590
40	rcGbic1610
41	rcRmon
42	rcGbic1470APD
43	rcGbic1490APD
44	rcGbic1510APD
45	rcGbic1530APD
46	rcGbic1550APD
47	rcGbic1570APD
48	rcGbic1590APD
49	rcGbic1610APD
50	rc10GbLW
51	rc10GbLR
52	rcLogicalServerPort
53	rc1000BaseTX
54	rc100BaseTXPOE
55	rcGbicBx
56	rc10GbNone
57	rc1000XFP
58	rc10GbSR
59	rc10GbSW
60	rc10GbER
61	rc10GbEW
62	rc10GbOther
63	rc1000BaseTXPOE
64	rc10GbZR
65	rc10GbZW
66	rcGbic1310Xd
67	rcGbic1470Xd
68	rcGbic1490Xd
69	rcGbic1510Xd
70	rcGbic1530Xd
71	rcGbic1550Xd
72	rcGbic1570Xd
73	rcGbic1590Xd
74	rcGbic1610Xd
75	rcGbic1470Zx
76	rcGbic1490Zx
77	rcGbic1510Zx
78	rcGbic1530Zx
79	rcGbic1550Zx
80	rcGbic1570Zx
81	rcGbic1590Zx
82	rcGbic1610Zx
83	rcGbic1690Zx
84	rcGbic1310Bx
85	rcGbic1490Bx
86	rcGbicEx
87	rcGbic850Sx
88	rcGbic1200Lx
89	rcGbic1300Lx
90	rcGbic1310Lx
91	rcGbic1490Lx
92	rcGbic1550Lx
93	rcGbic1550Ex
94	rc1GbFD
95	rc10GbLRM
96	rc10GbDWDMR
97	rc10GbDWDMW
98	rc100BaseSX
99	rc100BaseLX
100	rc100BaseFX
101	rc100BaseBX
102	rc100BaseZX
103	rcGbicMTRJ
104	rcGbic1300SeFx
105	rcGbicCX
106	rc10GbCX
107	rcSFPplus
108	rc10GBaseT
109	rc100BaseOther
110	rcUnknownSpeedOther
111	rc10GbERCWDM
112	rc10GbZRCWDM
113	rc10GbER1470
114	rc10GbER1490
115	rc10GbER1510
116	rc10GbER1530
117	rc10GbER1550
118	rc10GbER1570
119	rc10GbER1590
120	rc10GbER1610
121	rc10GbZR1470
122	rc10GbZR1490
123	rc10GbZR1510
124	rc10GbZR1530
125	rc10GbZR1550
126	rc10GbZR1570
127	rc10GbZR1590
128	rc10GbZR1610
129	rc40GbNone
130	rc40GbSR4
131	rc40GbLR4
132	rc40GbCR4
133	rc40GbOther
134	rcGbicDWDM180km
135	rc100BaseFxT1
136	rcUnsupported
137	rc40GbER
138	rc40GbNoneChannelized
139	rc40GbSR4Channelzied
140	rc40GbLR4Channelied
141	rc40GbCR4Channelized
142	rc40GbERChannelized
143	rc40GbOtherChannelized
144	rc40GbER4
145	rc40GbLM4
146	rc10GbBiDi
147	rc40GbCR4BoC
148	rc40GbAOBoC
149	rc10GbCXBoC
150	rc10GbAOBoC
151	rc40GbER4Channelized
152	rc40GbLM4Channelized
153	rc40GbCR4BoCChannelized
154	rc40GbAOBoCChannelized
155	rc40GbAOC
156	rc40GbAOCChannelized
157	rc100GbNone
158	rc100GbCR4
159	rc100GbSR4
160	rc100GbLR4
161	rc100GbAOC
162	rc100GbAOBoC
163	rc100GbCR4BoC
164	rc100GbOther
165	rc100GbER4
166	rc100GbNoneChannelized
167	rc100GbCR4Channelized
168	rc100GbSR4Channelized
169	rc100GbLR4Channelized
170	rc100GbER4Channelized
171	rc100GbAOCChannelized
172	rc100GbAOBoCChannelized
173	rc100GbCR4BoCChannelized
174	rc100GbOtherChannelized
175	rcGbic10GbCu
176	rc2500BaseT
177	rc40GbBiDiMMF
178	rc40GbLR4PSM
179	rc100GbCWDM4
180	rc40GbBiDiMMFChannelized
181	rc40GbLR4PSMChannelized
182	rc100GbCWDM4Channelized
183	rc25GbNone
184	rc25GbSR
185	rc25GbLR
186	rc25GbCX
187	rc25GbER
188	rc25GbAOC
189	rc25GbCXBoC
190	rc25GbAOBoC
191	rc10GbAOC
192	rc100GbSWDM4
193	rc100GbSWDM4Channelized
194	rc10GbInsight
195	rc100GbBiDi
196	rc100GbPSM4
197	rc100Gb4WDM10km
198	rc100Gb4WDM20km
199	rc100GbER4lite
200	rc100GbBiDiChannelized
201	rc100GbPSM4Channelized
202	rc100Gb4WDM10kmChannelized
203	rc100Gb4WDM20kmChannelized
204	rc100GbER4liteChannelized
205	rc100Gb4WDM40km
206	rc100Gb4WDM40kmChannelized
207	rc10GbBX10km1270
208	rc10GbBX10km1330
209	rc10GbBX40km1270
210	rc10GbBX40km1330
211	rc25GbESR
212	rc25GbSRLite
213	rc5GBaseT
214	rcGbicInsight

.1.3.6.1.4.1.2272.1.4.10.1.1.2

rcPortConnectorType

Type of connector installed on this port.

Enumeration

Enumerated Values:

1	nonRedundant
2	redundant

.1.3.6.1.4.1.2272.1.4.10.1.1.3

rcPortPerformRouting deprecated

Indicate whether this port should perform
routing

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.4

rcPortHighPriority deprecated

Indicate whether this port should be treated with
high priority

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.5

rcPortAction

Port related actions.

Enumerationr/w

Enumerated Values:

1	none
2	flushMacFdb
3	flushArp
4	flushIp
5	flushAll
6	triggerRipUpdate
7	clearLoopDetectAlarm

.1.3.6.1.4.1.2272.1.4.10.1.1.6

rcPortResult

Result from the last Vlan action.

Enumeration

Enumerated Values:

1	none
2	inProgress
3	success
4	fail

.1.3.6.1.4.1.2272.1.4.10.1.1.7

rcPortPrimaryConnector

For ports configured with redundant connectors,
this value is used to indicate which connector
should be used as the 'active' connector on this
port the next time the port is placed into the
ifAdminStatus=Up.

Enumerationr/w

Enumerated Values:

1	left
2	right
3	other

.1.3.6.1.4.1.2272.1.4.10.1.1.8

rcPortActiveConnector

For ports configured with redundant connectors,
this value is used to indicate which connector
is currently the active one. Only one connector
can be active an anytime.

Enumeration

Enumerated Values:

1	left
2	right
3	other

.1.3.6.1.4.1.2272.1.4.10.1.1.9

rcPortBackupConnectorStatus

Indicate the status of the link attached to the
back-up (non-active) connector.

Enumeration

Enumerated Values:

1	up
2	down
3	other

.1.3.6.1.4.1.2272.1.4.10.1.1.10

rcPortAutoNegotiate

Indicate whether this port enabled for auto
negotiations or not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.11

rcPortAdminDuplex

Indicates the port duplex type

Enumerationr/w

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.2272.1.4.10.1.1.12

rcPortOperDuplex

Indicate this port's current duplex value.

Enumeration

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.2272.1.4.10.1.1.13

rcPortAdminSpeed

Indicate this port's speed.

Enumerationr/w

Enumerated Values:

0	none
1	mbps10
2	mbps100
3	mbps1000
4	mbps10000
5	mbps40000
6	mbps100000
7	mbps25000
8	mbps2500
9	mbps5000

.1.3.6.1.4.1.2272.1.4.10.1.1.14

rcPortOperSpeed

Indicate this port's current speed value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.15

rcPortMltId

Indicate which multi-link trunk (MLT) this port
is assigned to. If this port is not associated
with any MLT, this value will be set to zero(0).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.16

rcPortLocked

Indicate whether this port is locked.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.17

rcPortAutoNegotiationSupported

Indicate whether this port can support
auto-negotiation.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.18

rcPortSingleRoutablePort

Indicate whether this port is a single routable
port. If this value is true, the port functions
like a traditional router port.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.19

rcPortUnknownMacDiscard

If rcUnknownMacDiscard is set to True,
then a packet with an unknown source MAC address
is dropped on that port, and other ports then
will discard any packets with this MAC address
in the destination field.
For example,…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.20

rcPortNumStateTransition

# state transitions.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2272.1.4.10.1.1.21

rcPortUserPriority deprecated

User priority level.

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.2272.1.4.10.1.1.22

rcPortAllowOversizeFrame deprecated

Used to specify whether over-size frames should be
processed or dropped.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.23

rcPortQosLevel

Used to specify the Qos level packets, carried on this
port, should be processed with.

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.2272.1.4.10.1.1.30

rcPortDiffServEnable

Used to enable/disable the Differentiated Service
feature on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.31

rcPortDiffServType

Used to specify the Differentiated Service type
for this port.

Enumerationr/w

Enumerated Values:

0	none
1	access
2	core

.1.3.6.1.4.1.2272.1.4.10.1.1.32

rcPortDiffServIeee8021POverrideEnable deprecated

Used to enable/disable the Differentiated Service
IEEE 802.1P over-ride feature.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.33

rcPortVendorDescr

Used to show the name of the vendor of this port's
connector. Only applicable to ports on a GBIC cards.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.2272.1.4.10.1.1.34

rcPortName

This port's name.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2272.1.4.10.1.1.35

rcPortOctapidId deprecated

The octapid id of the mirrored port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.36

rcPortWan

Indicatie this port's current WAN/LAN mode. Valid for 10 GE only

Enumerationr/w

Enumerated Values:

0	none
1	wan
2	lan

.1.3.6.1.4.1.2272.1.4.10.1.1.37

rcPortTransport

Indicatie this port's current tranport layer. Valid for 10 GE only

Enumerationr/w

Enumerated Values:

0	none
1	sonet
2	sdh

.1.3.6.1.4.1.2272.1.4.10.1.1.38

rcPortMultimediaFilterEnable

Used to enable/disable the Telephony device selected on this port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.39

rcPortMultimediaDevSelection

Used to set/get the selected Multimedia &
Telephony Devices on this port. The String is
the name of the device in the
rcIpFilterMediaDevTable

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2272.1.4.10.1.1.40

rcPortServiceType

Indicates the port functionality. 12uni is used to
configure the port to be part of Martini service,
tls is used to configure the port to be part of
Any2Any VPN service and ip is used to perform the IP
routing and mpls …

Enumerationr/w

Enumerated Values:

0	none
1	l2uni
2	vpls
3	ip
4	serverl2uni

.1.3.6.1.4.1.2272.1.4.10.1.1.41

rcPortMode

The port mode for l2uni service type.If the port is
configured for l2uni service type, then the mode can
be transparent or switched.

Enumerationr/w

Enumerated Values:

0	none
1	transparent
2	switched

.1.3.6.1.4.1.2272.1.4.10.1.1.42

rcPortAdminRouting

Indicate whether the port is routable.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.43

rcPortOperRouting

The status of the port whether is routable.

RAPID-CITYEnableValue

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.44

rcPortPid

The pid of the mirrored port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.45

rcPortIeee8021POverrideEnable

Used to enable/disable IEEE 802.1P override.
If it is enabled, 802.1p vlaue from a tagged
frame may not honor.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.46

rcPortShaperEnable

Used to enable/disable shaper on the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.47

rcPortShaperMaxRate

Shaping rate in mega bits per second. Note that
actual shaping rate might be different from the
configured rate due to the rate granularity
of the shaper.

Integer32r/w

Constraints:
range: 1-10000

.1.3.6.1.4.1.2272.1.4.10.1.1.48

rcPortShaperBurstSize

Burst size in kilo bytes per second. Note
that actual burst size might be different
from the configured size due to the granularity
of the shaper.

Integer32r/w

Constraints:
range: 4-16000

.1.3.6.1.4.1.2272.1.4.10.1.1.49

rcPortCpLimitShutDown

A TRUE value indicates if CP Limit shut down
the interface.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.50

rcPortHighSecureEnable

Enable/Disable high secure.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.51

rcPortTlsPriorityOverride

Enable/Disable tls port priority override feature.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.52

rcPortVctAbility

If this object is TRUE, then the specified port is
hardware-capable of doing the VCT test, if the
rcPortAdminStatus is also true. If this object is
FALSE, then the hardware cannot do the VCT test
regardless of the setti…

Enumeration

Enumerated Values:

1	vctNotCapable
2	vctCapable

.1.3.6.1.4.1.2272.1.4.10.1.1.53

rcPortVctAdminStatus

Admin status for port VCT test. If this object is
set to TRUE, then the VCT test can be performed. If
it is set to FALSE, then the test cannot be performed,
even if the port hardware is capable of doing it. If
this vari…

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.54

rcPortMrouteStrLimit

maximum number of multicast streams that are
allowed to ingress to CPU through this port.

Integer32r/w

Constraints:
range: 1-32768

.1.3.6.1.4.1.2272.1.4.10.1.1.55

rcPortMrouteStrTimerCheck

sampling period to check number of multicast
streams that has ingressed CPU through this port.

Integer32r/w

Constraints:
range: 1-3600

.1.3.6.1.4.1.2272.1.4.10.1.1.56

rcPortMrouteStrLimitEnable

enable or disable mroute stream limit on port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.57

rcPortUpdateDynamicMacQosLevel

It is used to indicate whether to update qos
level for dynamic learned mac add resses
associated with a port-based vlan when port qos
level changes. If it is set to TRUE, qos level
for all dynamic learned mac addresses…

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.58

rcPortVplsDualHoming

The VPLS dual homing is for VPLS service type only.
It can be disable, firstNNI or secondNNI.

Enumerationr/w

Enumerated Values:

0	disable
1	firstNNI
2	secondNNI

.1.3.6.1.4.1.2272.1.4.10.1.1.59

rcPortVplsMgmtVlan

Management Vlan is configured on this port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.60

rcPortTlsManagedBySp

True/False tls devices on port Managed By Service Provider.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.61

rcPortAutoNegAd

This object is used to specify the port speed
and duplex abilities to be advertised during
link negotiation.

bit 0 - 10 half duplex advertised
bit 1 - 10 full duplex advertised
bit 2 - 100 half duplex adv…

Bitsr/w

Enumerated Values:

0	advertise10Half
1	advertise10Full
2	advertise100Half
3	advertise100Full
4	advertise1000Half
5	advertise1000Full
6	advertiseMacPause
7	advertiseAsymPause
8	advertiseNone
9	advertise10000Full
10	default
11	advertise2500Full
12	advertise5000Full

.1.3.6.1.4.1.2272.1.4.10.1.1.62

rcPortAutoNegAdCapability

This object indicates the port speed and duplex
capabilities that hardware can actually support on a
port, and which may be advertised by the port
using auto-negotiation. Bit 7 tells if a port supports
pause frame capab…

Bits

Enumerated Values:

0	advertise10Half
1	advertise10Full
2	advertise100Half
3	advertise100Full
4	advertise1000Half
5	advertise1000Full
6	advertiseMacPause
7	advertiseAsymPause

.1.3.6.1.4.1.2272.1.4.10.1.1.63

rcPortAutoRecoverPort

enable or disable auto recovery of port from action
taken by cp-limit, link flap or loop detect features

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.64

rcPortExtCplimitConf

Indicates the port configuration for extended CP-LIMIT

Enumerationr/w

Enumerated Values:

1	none
2	softDown
3	hardDown

.1.3.6.1.4.1.2272.1.4.10.1.1.65

rcPortExtCplimitUtilRate

Threshold for Ingress traffic utilization rate of the port
for extended CP-LIMIT

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.2272.1.4.10.1.1.66

rcPortEgressRateLimit

Egress Rate Limit. 0 means disabled.

Integer32r/w

Constraints:
range: 64-40000000
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.67

rcPortEgressRateLimitState

Used to enable/disable shape/egress-rate-limit
functionality.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.68

rcPortBpduFilteringTimerCount obsolete

The remaining time the port will be disabled due
to a BPDU received when BPDU filtering is enabled.

Integer32

Constraints:
range: 0-6553500

.1.3.6.1.4.1.2272.1.4.10.1.1.69

rcPortBpduFilteringTimeout obsolete

The time the port will be disabled when a BPDU is
received when BPDU filtering is enabled.

Integer32r/w

Constraints:
range: 0-6553500

.1.3.6.1.4.1.2272.1.4.10.1.1.70

rcPortBpduFilteringAdminEnabled obsolete

Used to enable/disable BPDU filtering.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.71

rcPortBpduFilteringOperEnabled obsolete

Indicates whether BPDU filtering is actually
enabled or disabled.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.72

rcPortQinqEtherType

The qinq ether type value. It is hex value.
It should be displayed and input as Hex value. It is
only be used when port is associated with QnQ service
UNI. Otherwise, it would be ignored

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2272.1.4.10.1.1.73

rcPortTrustDscp

Used to enable/disable the trusted DSCP feature.
If enabled, the internal qos-level and 802.1p value are derived
from the received packet's DSCP value. This MIB object is
applicable to ports in 8348GTX so that higher p…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.74

rcPortCpLimitEnable

Used to enable/disable the control packet rate limit.
Specifies whether or not rate limiting is currently in
operation for multicast and broadcast packets for the
specified port.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.75

rcPortCpMulticastLimit

Used to limit Multicast traffic on the specified port. Sets
the limit in packets per second.

Integer32r/w

Constraints:
range: 1000-100000

.1.3.6.1.4.1.2272.1.4.10.1.1.76

rcPortCpBroadcastLimit

Used to limit Broadcast traffic on the specified port. Sets
the limit in packets per second.

Integer32r/w

Constraints:
range: 1000-100000

.1.3.6.1.4.1.2272.1.4.10.1.1.77

rcPortSmartAutoNegotiate

This object indicates whether 'smart' autonegotiation is
enabled on a port (smart autonegotiation indicates that the
port can sense whether its partner has autonegotiation
enabled). This object, when supported, works i…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.78

rcPortMepList

List of Meps assigned to this entry.
A mep is consist of <md>.<ma>.<mep_id>. Domain
Name, Association and Mep Id is separated by '.'
A list of mep is consist of
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
Each mep is …

OctetStringr/w

Constraints:
range: 0-408

.1.3.6.1.4.1.2272.1.4.10.1.1.79

rcPortNumOfMep

Used to indicate the number of Meps
is assigned to this entry

Integer32

Constraints:
range: 0-8

.1.3.6.1.4.1.2272.1.4.10.1.1.80

rcPortAdacStatus

If enabled, the Nortel IP phones connected to the port will be
configured in the voice VLAN.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.81

rcPortPvid

A port Vlan Id associates with ESM and RModule
port for OEL2/MIM traffic

Integer32r/w

Constraints:
range: 0-4093

.1.3.6.1.4.1.2272.1.4.10.1.1.82

rcPortTdp

This attribute allows to Enable/Disable Transparent
Domain Protocol at the port level on the ESM and
Power Ranger Card. For the TDP packet to go out on
the port, topology should be enabled both at the port
and box level…

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.83

rcPortClockSource

Indicates this port's current WAN clock source.
Valid for 10 GE WAN only

Enumerationr/w

Enumerated Values:

0	none
1	line
2	internal

.1.3.6.1.4.1.2272.1.4.10.1.1.84

rcPortIngressRateLimit

Limits the amount of traffic from this Ingress port.

Integer32r/w

Constraints:
range: 1000-40000000
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.85

rcPortIngressRateLimitState

Used to enable/disable police/ingress-rate-limit
functionality.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.86

rcPortVrfIdList

The set of VRF ids to which this port belongs.

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.2272.1.4.10.1.1.87

rcPortCfmVid

CFM default port vid

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.2272.1.4.10.1.1.88

rcPortUserLabel1

User provided field. Used to give extra management information/data

OctetStringr/w

Constraints:
range: 0-89

.1.3.6.1.4.1.2272.1.4.10.1.1.89

rcPortUserLabel2

User provided additional field. Used to give extra management information/data

OctetStringr/w

Constraints:
range: 0-89

.1.3.6.1.4.1.2272.1.4.10.1.1.90

rcPortClearCfmStats

To clear the port counter

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.91

rcPortInterfaceType

This value indicates whether a port is of type <normal/si
lent/uni>. A port can be included in any EVPN service
only if this attribute is set to uni. If the port is not
part of any VLAN the interface-type is set to sile…

Enumerationr/w

Enumerated Values:

1	normal
2	silent
3	uni

.1.3.6.1.4.1.2272.1.4.10.1.1.92

rcPortCfmControlMep

MEP assigned for CFM Control.
A mep consists of <md>.<ma>.<mep_id>. Domain
Name, Association and Mep Id is separated by '.'

OctetStringr/w

Constraints:
range: 0-57

.1.3.6.1.4.1.2272.1.4.10.1.1.93

rcPortMtu

Port Mtu

Integer32r/w

Constraints:
range: 1518-9600

.1.3.6.1.4.1.2272.1.4.10.1.1.94

rcPortMtuState

Used to enable/disable Port Mtu
functionality.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.95

rcPortVrfNameList

The set of VRF names to which this port belongs.

OctetString

.1.3.6.1.4.1.2272.1.4.10.1.1.96

rcPortBrouterVrfId

Gives the VRF Id for this Brouter port.

RC-VRF-MIBVrfIdentifierr/w

Textual Convention: RC-VRF-MIBVrfIdentifier Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2272.1.4.10.1.1.97

rcPortBrouterVrfName

Gives the VRF Name for this Brouter port.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.2272.1.4.10.1.1.98

rcPortVrfCount

The total number of VRFs this port is associated to.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2272.1.4.10.1.1.99

rcPortCtrlPktDropLimitEnable

Used to enable/disable Control Packets Drop
Rate Limiter functionality.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.100

rcPortCtrlPktDropLimit

Indicates the Control Packet drop rate limit
value

Integer32r/w

Constraints:
range: 20-1000
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.101

rcPortCtrlPktShutdownLimitEnable

Used to enable/disable Control Packets
Shutdown Rate Limiter functionality.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.102

rcPortCtrlPktShutdownLimit

Indicates the Control Packet shutdown rate
Limit value

Integer32r/w

Constraints:
range: 20-1000
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.103

rcPortCtrlPktShutdownRtExceeded

Indicates if the Shutdown rate has been exceeded
on the port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.104

rcPortCtrlPktDropRtExceeded

Indicates if the Drop rate has been exceeded
on the port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.105

rcPortDhcpOption82SubscriberId

This object contains the DHCP option 82 subscriber ID string to
be used in sub-option 6. If the value is an empty string, then
sub-option 6 is not included in option 82

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2272.1.4.10.1.1.106

rcPortServiceCardType

Port Hardware type, which includes PowerRanger,
ESM port and other

Enumeration

Enumerated Values:

1	esm8x1000Base
2	pr48x1000BaseTX
3	pr30x1000BaseSXBB
4	pr3x10GBaseGbic
5	pr3x10GBaseXZW
6	prPR48x1000BaseGBRS
7	prPR48x1000BaseGTRS
8	prPR12X10GBaseXLRS
9	prPR34xXGRS
10	prPR48x1000BaseGXRS
11	prPR30x1000BaseGBRS
12	prPR6X10GBaseXLRS
13	prPR26xXGRS
14	other

.1.3.6.1.4.1.2272.1.4.10.1.1.107

rcPortIngressRatePeak

Peak rate limit for this port. 0 means disable.

Integer32r/w

Constraints:
range: 0-0
range: 64-40000000

.1.3.6.1.4.1.2272.1.4.10.1.1.108

rcPortIngressRateSvc

Service rate limit for this port. 0 means disable.

Integer32r/w

Constraints:
range: 64-40000000
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.109

rcPortCpLimitPktRate

Used to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.

Integer32r/w

Constraints:
range: 1000-20000

.1.3.6.1.4.1.2272.1.4.10.1.1.110

rcPortCpLimitShutDownEnable

Used to indicate if the port should be shutdown
when the CpLimitPktRate is exceeded.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.111

rcPortRmonEnable

Used to set Remote Monitoring enable/disable

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.112

rcPortIpsecEnable deprecated

Used to set IPSEC enable/disable.
at place of this value use RcIpConfEntry for IPV4
and use RcIpv6InterfaceEntry for IPV6. This field
changed to deprecated

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.113

rcPortShutdownReason

The port shutdown can happen due to many reason.
It indicates the reason for the port state change.

Enumeration

Enumerated Values:

1	none
2	cpLimit
3	macFlap
4	linkFlap
5	telnet
6	rLogin
7	console
8	ssh
9	modem
10	snmp
11	fdLimit
12	vlacp
13	slpp
14	smlt
15	lossless
16	invalidLossCfg
17	dpHeartBeat
18	ddmStatus
19	dupQsfpSerNum
20	bpduGuard
21	slppg
22	linkStateTracking
23	vlacpFlapDampening

.1.3.6.1.4.1.2272.1.4.10.1.1.114

rcPortMdixMode

Defines the MDI crossover (MDIX) modes for the port

Enumerationr/w

Enumerated Values:

1	auto
2	forceAuto
3	normal
4	xover

.1.3.6.1.4.1.2272.1.4.10.1.1.115

rcPortFlexUniEnable

Used to set Flex UNI
enable/disable on port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.116

rcPortBpduGuardTimerCount

The remaining time the port will be disabled due
to a BPDU received when BPDU guard is enabled.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.1.1.117

rcPortBpduGuardTimeout

The time the port will be disabled when a BPDU is
received when BPDU Guard is enabled.

secondsInteger32r/w

Constraints:
range: 10-65535
range: 0-0

.1.3.6.1.4.1.2272.1.4.10.1.1.118

rcPortBpduGuardAdminEnabled

Used to enable/disable BPDU guard.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.119

rcPortLicenseControlStatus

This object show the license conrol status of a port.
It is only applicable to a port which reuqires PORT
license file to be adminstratively enabled (ifAdminStatus).

'locked' means the port requires PORT …

Enumeration

Enumerated Values:

1	locked
2	unlocked
3	notApplicable

.1.3.6.1.4.1.2272.1.4.10.1.1.120

rcPortTxFlowControl

Used to enable/disable Tx flow control.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.121

rcPortTxFlowControlOperState

Used to indicate the Tx flow control operational state.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.122

rcPortCarrierDelayEnable

Used to enable/disable carrier delay feature
on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.123

rcPortCarrierDelayInterval

Used to configure the carrier delay interval
in milliseconds on this port.

millisecondsInteger32r/w

Constraints:
range: 0-60000

.1.3.6.1.4.1.2272.1.4.10.1.1.124

rcPortForwardErrorCorrection

Forward error correction

Enumerationr/w

Enumerated Values:

1	cl91
2	cl108
3	cl74
4	disable
5	auto

.1.3.6.1.4.1.2272.1.4.10.1.1.125

rcPortForwardErrorCorrectionApplicability

Object to inidcate the valid of object
rcPortForwardErrorCorrection is applicable to this
interface or not

Enumeration

Enumerated Values:

1	applicable
2	notApplicable
3	cl91
4	cl108
5	cl74
6	disable

.1.3.6.1.4.1.2272.1.4.10.1.1.126

rcPortMacsecMKAProfileName

Associate the port to the MACSec mka profile

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2272.1.4.10.1.1.127

rcPortOperAutoNegotiate

Indicate the operational state of auto negotiation.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.128

rcPortOperForwardErrorCorrection

Indicate the operation value of Forward error correction.
cl91 - when FEC is applicable, port is up and
negotiated/admin config to CLAUSE91.
cl108 - when FEC is applicable, port is up and
negotiated/adm…

Enumeration

Enumerated Values:

1	cl91
2	cl108
3	cl74
4	off
5	notApplicable
6	unknown

.1.3.6.1.4.1.2272.1.4.10.1.1.129

rcPortAutoSense

Set the operation value of AutoSense configuration on port.
disable - AutoSense is disabled. All configuration done
by AutoSense (ZTF) will be erased/discarded.
ena…

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2272.1.4.10.1.1.130

rcPortAutoSenseKeepAutoConfig

When set to true, all port configuration made by ZTF will be
kept if AutoSense is disabled on port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.1.1.131

rcPortCustomAutoNegAdOrigin

Indicates how the Custom Auto Negotiation Advertisements were configured.
Supported values:
config - set by user
radius - set by radius atribute

Bits

Enumerated Values:

0	config
1	radius

.1.3.6.1.4.1.2272.1.4.10.1.1.132

rcPortBpduGuardOrigin

Indicates how bpdu guard was configured.
Supported values:
config - set by user
radius - set by radius atribute

Bits

Enumerated Values:

0	config
1	radius

.1.3.6.1.4.1.2272.1.4.10.1.1.133

rcPortAutoSenseState

The state of the auto-sense port, when auto-sense is enabled

Enumeration

Enumerated Values:

1	noAutoSense
2	down
3	wait
4	uniOnboarding
5	nni
6	nniLoop
7	nniIsisUp
8	faProxyNoAuth
9	faWap
10	nniOnboading
11	voice
12	faProxy

.1.3.6.1.4.1.2272.1.4.10.1.1.134

rcPortPcapTable

table

.1.3.6.1.4.1.2272.1.4.10.2 · 1 row entry · 7 columns

Open in standard view

Port pcap Table

rcPortPcapEntry entry .1.3.6.1.4.1.2272.1.4.10.2.1

Entry containing pcap info. for a particular port

Indexes

rcPortPcapIndex

Column Syntax OID

rcPortPcapIndex

An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.2.1.1

rcPortPcapEnable

To enable pcap for the port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.2.1.2

rcPortPcapMode

Mode in which pcap is enabled

Enumerationr/w

Enumerated Values:

1	tx
2	rx
3	both
4	rxFilter
5	txFilter
6	bothFilter

.1.3.6.1.4.1.2272.1.4.10.2.1.3

rcPortPcapFilterListSize

Used to indicate the number of filter list(s)
that are assigned to this port.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.2272.1.4.10.2.1.4

rcPortPcapFilterList

Used to indicate zero or more filter lists that
are associated with this port for pcap. Each
filter list identifier is stored as two bytes
in this array starting from offset zero. Any
unused bytes should be set to zer…

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2272.1.4.10.2.1.5

rcPortPcapAclFilterListSize

Used to indicate the number of ACL filter(s)
that are assigned to this port which has mirror set
as global-action.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.2272.1.4.10.2.1.6

rcPortPcapAclFilterList

Used to indicate zero or more ACL filter lists
that are associated with this port for pcap (has mirror
set as global-action). Each ACL filter list
identifier is stored as two bytes
in this array starting from offset ze…

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2272.1.4.10.2.1.7

rcPortPoePseIndexTable

table

.1.3.6.1.4.1.2272.1.4.10.3.1 · 1 row entry · 3 columns

Open in standard view

Port table

rcPortPoePseIndexEntry entry .1.3.6.1.4.1.2272.1.4.10.3.1.1

Entry containing info. for a particular port

Indexes

rcPortPoePseIndexIfIndex

Column	Syntax	OID
rcPortPoePseIndexIfIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.1.1.1`
rcPortPoePseIndexGroupIndex An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.2272.1.4.10.3.1.1.2`
rcPortPoePseIndexPortIndex This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.2272.1.4.10.3.1.1.3`

rcPortPoeMainPseExtnTable

table

.1.3.6.1.4.1.2272.1.4.10.3.2 · 1 row entry · 5 columns

Open in standard view

Port table

rcPortPoeMainPseExtnEntry entry .1.3.6.1.4.1.2272.1.4.10.3.2.1

Entry containing info. for a particular port

Indexes

rcPortPoeMainPseExtnGroupIndex

Column Syntax OID

rcPortPoeMainPseExtnGroupIndex

An index value that uniquely identifies an interface
to a PSE port device. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2272.1.4.10.3.2.1.1

rcPortPoeMainPseExtnPwrAdmin

An index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the sam…

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.4.10.3.2.1.2

rcPortPoeMainPseExtnPwrPriority

Enumerationr/w

Enumerated Values:

1	critical
2	high
3	low

.1.3.6.1.4.1.2272.1.4.10.3.2.1.3

rcPortPoeMainPseExtnDeviceDetectType

Enumerationr/w

Enumerated Values:

1	p802dot3af
2	p802dot3afAndLegacy

.1.3.6.1.4.1.2272.1.4.10.3.2.1.4

rcPortPoeMainPseExtnPwrLimit

The maximum available PoE power of the main PSE
expressed in Watts.

Integer32r/w

Constraints:
range: 37-800

.1.3.6.1.4.1.2272.1.4.10.3.2.1.5

rcPortPoePsePortExtnTable

table

.1.3.6.1.4.1.2272.1.4.10.3.3 · 1 row entry · 6 columns

Open in standard view

Port table

rcPortPoePsePortExtnEntry entry .1.3.6.1.4.1.2272.1.4.10.3.3.1

Entry containing info. for a particular port

Indexes

rcPortPoePsePortExtnGroupIndex rcPortPoePsePortExtnPortIndex

Column	Syntax	OID
rcPortPoePsePortExtnGroupIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.1`
rcPortPoePsePortExtnPortIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.2`
rcPortPoePsePortExtnPwrLimit An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Integer32r/w Constraints: `range: 3-16`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.3`
rcPortPoePsePortExtnMeasuredVolt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.4`
rcPortPoePsePortExtnMeasuredCurrent An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.5`
rcPortPoePsePortExtnPwrConsumpt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2272.1.4.10.3.3.1.6`

rcPortLacpTable

table

.1.3.6.1.4.1.2272.1.4.10.4 · 1 row entry · 11 columns

Open in standard view

Port LACP table

rcPortLacpEntry entry .1.3.6.1.4.1.2272.1.4.10.4.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column Syntax OID

rcPortLacpAdminEnable

Administratively enable/disable LACP on a port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.4.1.1

rcPortLacpOperEnable

Indicates if LACP is operationally enabled or disabled
on a port

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.4.1.2

rcPortLacpFastPeriodicTime

The number of miliseconds between periodic transmissions
using Short Timeouts.

Integer32r/w

Constraints:
range: 200-20000

.1.3.6.1.4.1.2272.1.4.10.4.1.3

rcPortLacpSlowPeriodicTime

The number of miliseconds between periodic transmissions
using LONG Timeouts.

Integer32r/w

Constraints:
range: 10000-30000

.1.3.6.1.4.1.2272.1.4.10.4.1.4

rcPortLacpTimeoutScale

Scalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScale

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.2272.1.4.10.4.1.5

rcPortLacpAggrWaitTime

The number of mili seconds to delay aggregation to
allow multiple links to aggregate simultaneously.

Integer32r/w

Constraints:
range: 200-2000

.1.3.6.1.4.1.2272.1.4.10.4.1.6

rcPortLacpFastPeriodicTimeOper

The operating value of fast periodic timer on the port.

Integer32

Constraints:
range: 10-20000

.1.3.6.1.4.1.2272.1.4.10.4.1.7

rcPortLacpSlowPeriodicTimeOper

The operating value of slow periodic timer on the port.

Integer32

Constraints:
range: 10-30000

.1.3.6.1.4.1.2272.1.4.10.4.1.8

rcPortLacpTimeoutScaleOper

The operating value of timeout scale on the port.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.2272.1.4.10.4.1.9

rcPortLacpAggrWaitTimeOper

The operating value of aggreagate wait time on port.

Integer32

Constraints:
range: 10-2000

.1.3.6.1.4.1.2272.1.4.10.4.1.10

rcPortLacpSuppressMisConfigLog

Enable/Disable Suppression of misconfiguration logs.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.4.1.11

rcPortVLacpTable

table

.1.3.6.1.4.1.2272.1.4.10.5 · 1 row entry · 17 columns

Open in standard view

Port Virtual LACP table

rcPortVLacpEntry entry .1.3.6.1.4.1.2272.1.4.10.5.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column Syntax OID

rcPortVLacpAdminEnable

Administratively enable/disable Virtual LACP on a port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.5.1.1

rcPortVLacpOperEnable

Indicates if Virtual LACP is operationally enabled or
disabled on a port

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.5.1.2

rcPortVLacpFastPeriodicTimer

The number of miliseconds between periodic transmissions
using Short Timeouts

Integer32r/w

Constraints:
range: 200-20000

.1.3.6.1.4.1.2272.1.4.10.5.1.3

rcPortVLacpSlowPeriodicTimer

The number of miliseconds between periodic transmissions
using LONG Timeouts.

Integer32r/w

Constraints:
range: 10000-30000

.1.3.6.1.4.1.2272.1.4.10.5.1.4

rcPortVLacpTimeout

Timeout control value. Long or Short Timeout

Enumerationr/w

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.2272.1.4.10.5.1.5

rcPortVLacpTimeoutScale

Scalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScale

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.2272.1.4.10.5.1.6

rcPortVLacpEtherType

VLACP Protocol Identification. The id value is
in Hex

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.5.1.7

rcPortVLacpEtherMacAddress

Multicast Mac Address exclusively used for VLACPDU's

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.5.1.8

rcPortVLacpPortState

Display the Vlacp Port State.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2272.1.4.10.5.1.9

rcPortVLacpDualHomingEnable

Enable/Disable Dual homing on Virtual LACP on a port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.5.1.10

rcPortVLacpFlapDetectEnable

Administratively enable/disable VLACP flap detect on
a port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.5.1.11

rcPortVLacpFlapFrequency

The number of VLACP flaps on a port. If they
occur within rcPortVLacpFlapInterval seconds,
the port is shutdown.

Integer32r/w

Constraints:
range: 3-30

.1.3.6.1.4.1.2272.1.4.10.5.1.12

rcPortVLacpFlapInterval

The time interval in seconds within which VLACP
flaps on a port are monitored.

Integer32r/w

Constraints:
range: 10-600

.1.3.6.1.4.1.2272.1.4.10.5.1.13

rcPortVLacpTotalFlapCount

The total number of VLACP flaps detected on this port
since either enabling VLACP or clearing the counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2272.1.4.10.5.1.14

rcPortVLacpFirstFlapTimeStamp

Timestamp for the first VLACP flap detected on
this port since either enabling VLACP or clearing
the timer.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2272.1.4.10.5.1.15

rcPortVLacpLastFlapTimeStamp

Timestamp for the last VLACP flap detected on
this port since either enabling VLACP or clearing
the timer.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2272.1.4.10.5.1.16

rcPortVLacpFlapClearStats

Clear VLACP Flap counters and timers.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.5.1.17

rcPortRemoteMirroringTable

table

.1.3.6.1.4.1.2272.1.4.10.6 · 1 row entry · 9 columns

Open in standard view

Port Remote Mirroring Table

rcPortRemoteMirroringEntry entry .1.3.6.1.4.1.2272.1.4.10.6.1

Entry containing remote mirroring info. for a
particular port

Indexes

rcPortRemoteMirroringIndex

Column Syntax OID

rcPortRemoteMirroringIndex

An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.6.1.1

rcPortRemoteMirroringEnable

To enable remote Mirroring for the port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.6.1.2

rcPortRemoteMirroringMode

Mode in which remote mirroring is enabled

Enumerationr/w

Enumerated Values:

1	source
2	termination

.1.3.6.1.4.1.2272.1.4.10.6.1.3

rcPortRemoteMirroringSrcMac

Source Mac of the remote mirrored packet.
Remote mirroring packet will be send with
this source mac address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.6.1.4

rcPortRemoteMirroringDstMac

Destination Mac of the remote mirrored packet.
Packets will be bridged to this mac address.
Remote mirroring packet will be send to this
mac address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.6.1.5

rcPortRemoteMirroringEtherType

Ethertype of the remote mirrored packet. Packets
will be send with this ethertype

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2272.1.4.10.6.1.6

rcPortRemoteMirroringVlanIdListSize

Used to indicate the number of VLAN IDs
that are assigned to this port.

Integer32

Constraints:
range: 0-2000

.1.3.6.1.4.1.2272.1.4.10.6.1.7

rcPortRemoteMirroringVlanIdList

This field is used only if the port is assigned as
remote mirroring termination port. Represents zero
or more filter lists vlan in which the Destination
Mac address resides. Each VLAN ID is stored as
two bytes in this …

OctetStringr/w

Constraints:
range: 4096-4096

.1.3.6.1.4.1.2272.1.4.10.6.1.8

rcPortRemoteMirroringRowStatus

RowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2272.1.4.10.6.1.9

rcPortVlacpSessionTable

table

.1.3.6.1.4.1.2272.1.4.10.7 · 1 row entry · 6 columns

Open in standard view

A table used to maintain Vlacp session values.

rcPortVlacpSessionEntry entry .1.3.6.1.4.1.2272.1.4.10.7.1

Entry containing Vlacp Session information
regarding a particular port or mlt.

Indexes

rcPortVlacpSessionIfIndex rcPortVlacpSessionSesNumber

Column Syntax OID

rcPortVlacpSessionIfIndex

IfIndex of the port or Mlt

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2272.1.4.10.7.1.1

rcPortVlacpSessionSesNumber

Session number of an IfIndex

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2272.1.4.10.7.1.2

rcPortVlacpSessionSrcMacAddress

Mac Address for the session

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.7.1.3

rcPortVlacpSessionRxTimer

The Rx timer for the session

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.7.1.4

rcPortVlacpSessionValidbit

The valid bit for the session

Enumeration

Enumerated Values:

0	inValidSession
1	validSession

.1.3.6.1.4.1.2272.1.4.10.7.1.5

rcPortVlacpSessionInPktCount

The In packet count for the session

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.4.10.7.1.6

rcPortMgmtLinkTable

table

.1.3.6.1.4.1.2272.1.4.10.8 · 1 row entry · 6 columns

Open in standard view

Port card mgmt port link table

rcPortMgmtLinkEntry entry .1.3.6.1.4.1.2272.1.4.10.8.1

Entry containing info. for a particular mgmt port in I/O
card

Indexes

rcPortMgmtLinkIndex

Column Syntax OID

rcPortMgmtLinkIndex

IfIndex of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.8.1.1

rcPortMgmtLinkDescr

Port description

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2272.1.4.10.8.1.2

rcPortMgmtLinkOperStatus

admin status of the mgmt port

Enumeration

Enumerated Values:

1	up
2	down
3	unknown

.1.3.6.1.4.1.2272.1.4.10.8.1.3

rcPortMgmtLinkAutoNegotiate

Auto-negotiation status of the port

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.8.1.4

rcPortMgmtLinkDuplex

duplex setting for the port

Enumeration

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.2272.1.4.10.8.1.5

rcPortMgmtLinkSpeed

speed setting for this port.

Enumeration

Enumerated Values:

0	none
1	mbps10
2	mbps100
3	mbps1000

.1.3.6.1.4.1.2272.1.4.10.8.1.6

rcPortFlushFdbTable

table

.1.3.6.1.4.1.2272.1.4.10.9 · 1 row entry · 2 columns

Open in standard view

Port Flush Fdbtable

rcPortFlushFdbEntry entry .1.3.6.1.4.1.2272.1.4.10.9.1

port based deletion of mac addresses
learned or discarded on that port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortFlushFdbAddress Mac Address to be deleted.	OctetStringr/w Constraints: `range: 17-17`	`.1.3.6.1.4.1.2272.1.4.10.9.1.1`
rcPortFlushFdbVlanId vlan Id associated with the Mac Address	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.2272.1.4.10.9.1.2`

rcPortRemotePortShutdownTable

table

.1.3.6.1.4.1.2272.1.4.10.10 · 1 row entry · 6 columns

Open in standard view

A list of RemotePortShutdown port info.

rcPortRemotePortShutdownEntry entry .1.3.6.1.4.1.2272.1.4.10.10.1

A RemotePortShutdown table entry.

Indexes

rcPortRemotePortShutdownIfIndex

Column Syntax OID

rcPortRemotePortShutdownIfIndex

The ifIndex value for a port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.10.1.1

rcPortRemotePortShutdownEnabled

This object controls whether the Remote-Port-Shutdown feature is
enabled or disabled on a port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.10.1.2

rcPortRemotePortShutdownHoldTimer

Indicates the time period after a port has been shutdown during which
it will remain down, regardless of any CCMs received during that time
period.

secondsInteger32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.2272.1.4.10.10.1.3

rcPortRemotePortShutdownStatus

This object indicates whether a port is shutdown by the remote port
shutdown feature.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2272.1.4.10.10.1.4

rcPortRemotePortShutdownLocalMacAddress

Local MAC address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.10.1.5

rcPortRemotePortShutdownRemoteMacAddress

Remote MAC address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2272.1.4.10.10.1.6

rcPortFlushMacTable

table

.1.3.6.1.4.1.2272.1.4.10.11 · 1 row entry · 3 columns

Open in standard view

Flush MAC entry on a port.

rcPortFlushMacEntry entry .1.3.6.1.4.1.2272.1.4.10.11.1

Port mac flush table entry.

Indexes

rcPortFlushMacPortNum

Column	Syntax	OID
rcPortFlushMacPortNum Port number where the mac record exists.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.2272.1.4.10.11.1.1`
rcPortFlushMacAddr Mac Address that needs to be removed.	OctetStringr/w Constraints: `range: 17-17`	`.1.3.6.1.4.1.2272.1.4.10.11.1.2`
rcPortFlushMacVlanId Vlan Id associated with the Mac Address.	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.2272.1.4.10.11.1.3`

rcLldpXMedLocMediaPolicyTable

table

.1.3.6.1.4.1.2272.1.4.10.12 · 1 row entry · 8 columns

Open in standard view

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

rcLldpXMedLocMediaPolicyEntry entry .1.3.6.1.4.1.2272.1.4.10.12.1

Information about a particular policy on a specific
port component.

Indexes

rcLldpXMedLocMediaPolicyPortNum rcLldpXMedLocMediaPolicyAppType

Column Syntax OID

rcLldpXMedLocMediaPolicyPortNum

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.12.1.1

rcLldpXMedLocMediaPolicyAppType

The media type that defines the primary function of the
application for the policy advertised by an endpoint.

LLDP-EXT-MED-MIBPolicyAppType

Textual Convention: LLDP-EXT-MED-MIBPolicyAppType Bits

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.2272.1.4.10.12.1.2

rcLldpXMedLocMediaPolicyVlanID

An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

A value of 0 shall be used if the …

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.2272.1.4.10.12.1.3

rcLldpXMedLocMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the given port on the
local system.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2272.1.4.10.12.1.4

rcLldpXMedLocMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2272.1.4.10.12.1.5

rcLldpXMedLocMediaPolicyUnknown

A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' ind…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.12.1.6

rcLldpXMedLocMediaPolicyTagged

A value of 'true' indicates that the application is using a

tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.12.1.7

rcLldpXMedLocMediaPolicyRowStatus

Used to create/delete entries.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2272.1.4.10.12.1.8

rcPortLosslessEnetTable

table

.1.3.6.1.4.1.2272.1.4.10.13 · 1 row entry · 4 columns

Open in standard view

Port Lossless Ethernet Table

rcPortLosslessEnetEntry entry .1.3.6.1.4.1.2272.1.4.10.13.1

Entry containing lossless Ethernet information
for a particular port.

Indexes

rcPortLosslessEnetIndex

Column Syntax OID

rcPortLosslessEnetIndex

An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
Lossless Ethernet will be limited to 10Gig
ports.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.13.1.1

rcPortLosslessEnetConfigured

To enable lossless mode for the port

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.13.1.2

rcPortLosslessEnetPauseType

Pause frame type. fc - Pause,
pfc - priority-based flow control.

Enumerationr/w

Enumerated Values:

1	fc
2	pfc

.1.3.6.1.4.1.2272.1.4.10.13.1.3

rcPortLosslessEnetPfcBandwidth

Guaranteed bandwidth in Gbps when
rcPortLosslessEnetPauseType is set to pfc(2).

Integer32r/w

Constraints:
range: 2-8

.1.3.6.1.4.1.2272.1.4.10.13.1.4

rcChannelizedPortTable

table

.1.3.6.1.4.1.2272.1.4.10.14 · 1 row entry · 3 columns

Open in standard view

Port table for all channelized capable ports.

rcChannelizedPortEntry entry .1.3.6.1.4.1.2272.1.4.10.14.1

Entry containing info for a key port of channelized
capable port.

Indexes

rcChannelizedPortIndex

Column Syntax OID

rcChannelizedPortIndex

An index value that uniquely identifies a port which is
channelized capable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2272.1.4.10.14.1.1

rcChannelizedPortChannelType

port channelized type. Either 40G or 100G.

Enumeration

Enumerated Values:

1	fortyGig
2	hundredGig

.1.3.6.1.4.1.2272.1.4.10.14.1.2

rcChannelizedPortAdminMode

Administratively enable/disable the port channelized mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.4.10.14.1.3

rcPortExtendTable

table

.1.3.6.1.4.1.2272.1.4.10.15 · 1 row entry · 1 columns

Open in standard view

Port extend table.

rcPortExtendEntry entry .1.3.6.1.4.1.2272.1.4.10.15.1

Entry containing info for a key port.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortExtendPortDisplayFormat The port format to display.	OctetString Constraints: `range: 0-9`	`.1.3.6.1.4.1.2272.1.4.10.15.1.1`

rcPortVlacpStatsTable

table

.1.3.6.1.4.1.2272.1.4.10.16 · 1 row entry · 4 columns

Open in standard view

A table that contains VLACP information
about every port that is associated with this device.
A row appears in this table for each physical port.

rcPortVlacpStatsEntry entry .1.3.6.1.4.1.2272.1.4.10.16.1

A list of Virtual Link Aggregation Control Protocol statistics
for each port on this device.

Indexes

rcPortVlacpIndex

Column	Syntax	OID
rcPortVlacpIndex The ifIndex of VLACP ports	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.2272.1.4.10.16.1.1`
rcPortVlacpStatsLACPDUsRx The number of valid VLACPDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.4.10.16.1.2`
rcPortVlacpStatsLACPDUsTx The number of VLACPDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.4.10.16.1.3`
rcPortVlacpStatsLACPDUsMismatch The number of mismatched VLACPDUs in terms of seq-num RX'ed on this Port. This value is read-only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.4.10.16.1.4`

rcTestExtTable

table

.1.3.6.1.4.1.2272.1.11.1 · 1 row entry · 3 columns

Open in standard view

Test extension table.  This table augments the
standard ifTestTable table in RFC1573.

rcTestEntry entry .1.3.6.1.4.1.2272.1.11.1.1

Proprietary test variables.

Indexes

rcTestExtIfIndex

Column	Syntax	OID
rcTestExtIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.2272.1.11.1.1.1`
rcTestExtPassCount The number of iterations of the test case that completed successfully.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2272.1.11.1.1.2`
rcTestExtFailCount The number of iterations of the test case that failed.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2272.1.11.1.1.3`

rcStatTable

table

.1.3.6.1.4.1.2272.1.12.1 · 1 row entry · 33 columns

Open in standard view

A table used to store port statistics.

rcStatEntry entry .1.3.6.1.4.1.2272.1.12.1.1

interface counters

Indexes

rcStatPortIndex

Column	Syntax	OID
rcStatPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.2272.1.12.1.1.1`
rcStatFrameTooShorts The total number of frames that are too short that were encountered on this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.2`
rcStatBridgeInUnicastFrames The total number of incoming unicast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.3`
rcStatBridgeInMulticastFrames The total number of incoming multicast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.4`
rcStatBridgeInBroadcastFrames The total number of incoming broadcast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.5`
rcStatBridgeInDiscards The total number of frames that were discarded by the bridging entity.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.6`
rcStatBridgeOutUnicastFrames The total number of outgoing unicast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.7`
rcStatBridgeOutMulticastFrames The total number of outgoing multicast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.8`
rcStatBridgeOutBroadcastFrames The total number of outgoing broadcast frames that were bridged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.9`
rcStatRouteInUnicastFrames The total number of incoming unicast frames that were routed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.10`
rcStatRouteInMulticastFrames The total number of incoming multicast frames that were routed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.11`
rcStatRouteInDiscards The total number of frames that were discarded by the routing entity.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.12`
rcStatRouteOutUnicastFrames The total number of outgoing unicast frames that were routed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.13`
rcStatRouteOutMulticastFrames The total number of outgoing multicast frames that were routed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.14`
rcStatStgForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.15`
rcStatStgInConfigBpdus Received Config BPDUs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.16`
rcStatStgInTcnBpdus Received TCN BPDUs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.17`
rcStatStgInBadBpdus Received bad BPDUs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.18`
rcStatStgOutConfigBpdus Transmitted config BPDUs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.19`
rcStatStgOutTcnBpdus Transmitted TCN BPDUs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.20`
rcStatBridgeOutFrames Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2272.1.12.1.1.21`
rcStatPbtUnknownDropCount Count of PBT packets dropped due to unknown destination MAC	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.22`
rcStatCtrlPktRtLimitTotalCnt Total count of control packets that is passed for rate limiting	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.23`
rcStatCtrlPktRtLimitDropCnt Count of control packets dropped after rate limiting	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.24`
rcStatPolicerTotalBytes The total number of bytes received on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.25`
rcStatPolicerTotalPkts The total number of packets received on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.26`
rcStatPolicerGreenBytes The total number of bytes received on the interface that were below the committed rate.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.27`
rcStatPolicerYellowBytes The total number of bytes received on the interface that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.28`
rcStatPolicerRedBytes The total number of bytes received on the interface that were above the peak rate.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.29`
rcStatRateLimitDropPktRate The total number of packets dropped per second on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.30`
rcStatRateLimitDropByteRate The total number of bytes dropped per second on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.31`
rcStatRateLimitDropTotalBytes The total number of bytes dropped on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.32`
rcStatRateLimitDropTotalPkts The total number of packets dropped on the interface.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2272.1.12.1.1.33`