RC-DIAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
126

rcDiagMirrorByPortTable

table
.1.3.6.1.4.1.2272.1.23.1 · 1 row entry · 23 columns
Open in standard view 
This table is used to configure the Mirror By
Port feature.  This feature allows the device
to forward a copy of each packet seen on a
particular port to a different port.
rcDiagMirrorByPortEntry entry .1.3.6.1.4.1.2272.1.23.1.1
Entry containing mirror by port information.
Indexes
rcDiagMirrorByPortId
Column Syntax OID
rcDiagMirrorByPortId
Entry id.
Integer32
Constraints:
range: 1-479
 .1.3.6.1.4.1.2272.1.23.1.1.1
rcDiagMirrorByPortMirroredPort
Used to configure the 'mirrored' port. The port
where packets are copied from.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.2
rcDiagMirrorByPortMirroringPort
Used to configure the 'mirroring' port. The port
where packets are copied to.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.3
rcDiagMirrorByPortMode
Used to configure the 'mode' of the mirror operation.
'tx' means packets being transmitted on the 'mirrored'
port will be copied. 'rx' means packets received on
the 'mirrored' port will be copied. 'both' means
all tra…
Enumerationr/w
Enumerated Values:
1tx
2rx
3both
4rxFilter
5txFilter
6bothFilter
 .1.3.6.1.4.1.2272.1.23.1.1.4
rcDiagMirrorByPortEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.1.1.5
rcDiagMirrorByPortRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.1.1.6
rcDiagMirrorByPortOctapidId deprecated
Octapid Id for a port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.7
rcDiagMirrorByPortPid
Pid for a port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.8
rcDiagMirrorRemoteMirrorVlanId
vlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packet
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2272.1.23.1.1.9
rcDiagMirrorByPortSpEncap
disable/enable service provide encapsulation. If this
attribute is true the mirrored packets contains the service provider
encapsulation, OEL2 and Mac-in-Mac encapsulation are supported.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.1.1.10
rcDiagMirrorByPortGranularity
Used to configure the 'granularity' of the mirror
operation physicalPort means all traffic ingressing or egressing out of
the mirrored port shall be copied to the mirroring port.
services means all traffic ingressing or…
Enumerationr/w
Enumerated Values:
1physicalPortLevel
2serviceLevel
 .1.3.6.1.4.1.2272.1.23.1.1.11
rcDiagMirrorByPortMirroredPortList
Used to configure mirroring port list.Port list where packets are copied from
RAPID-CITYPortSetr/w
Textual Convention: RAPID-CITYPortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.1.1.12
rcDiagMirrorByPortMirroringPortList
Used to configure mirroring port list.Port list where the packets are copied to
RAPID-CITYPortSetr/w
Textual Convention: RAPID-CITYPortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.1.1.13
rcDiagMirrorMirroringVlanId
Destination is a VLAN.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2272.1.23.1.1.14
rcDiagMirrorMirroringMltId
Destination is a MLT
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.23.1.1.15
rcDiagMirrorMirroringMgId
contains information about the MGID allocated.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2272.1.23.1.1.16
rcDiagMirrorMirroringIpAddr
Destination IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.1.1.17
rcDiagMirrorMirroringIpTtl
Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl.
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.2272.1.23.1.1.18
rcDiagMirrorMirroringIpDscp
Dscp value for mirrored packets when mirror
destination is IP. If other than default,
the encapsulated packet will have the given
Dscp value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.1.1.19
rcDiagMirrorByPortScope
Used to configure the port mirroring scope.
Chassis is the default option which allows
mirroring among ports from different slots.
Slice option requires both mirroring and
mirrored ports to be within the same slice.
Sco…
Enumerationr/w
Enumerated Values:
1chassis
2slice
 .1.3.6.1.4.1.2272.1.23.1.1.20
rcDiagMirrorMonitoringIsidOffset
Used to configure the monitoring ISID offset value.
The offset id value is mapped to actual monitor I-SID value
in which packets are mirrored to.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.1.1.21
rcDiagMirrorMonitoringIsid
Actual monitor I-SID value in which packets are mirrored to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.22
rcDiagMirrorMirroringQos
Used to define the Quality of Service (QoS) profiles for
the mirrored packet into monitoring ISID.
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.2272.1.23.1.1.23

rcDiagPortConvSteeringTable

table
.1.3.6.1.4.1.2272.1.23.2 · 1 row entry · 7 columns
Open in standard view 
Diag Port Conv Steering Table
rcDiagPortConvSteeringEntry entry .1.3.6.1.4.1.2272.1.23.2.1
Entry containing infomation of Diag Port Conv Steering.
Indexes
rcDiagPortConvSteeringId
Column Syntax OID
rcDiagPortConvSteeringId
Entry id.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.1
rcDiagPortConvSteeringPortOne
IfIndex for port one
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.2
rcDiagPortConvSteeringPortTwo
IfIndex for port two
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.3
rcDiagPortConvSteeringMode
Used to specify the traffic flow that should be
captured between ports one and two.
Enumerationr/w
Enumerated Values:
1oneToTwo
2twoToOne
3both
 .1.3.6.1.4.1.2272.1.23.2.1.4
rcDiagPortConvSteeringForwardPort
IfIndex of the port where captured traffic should
be forwarded to.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.5
rcDiagPortConvSteeringEnable
Enable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.2.1.6
rcDiagPortConvSteeringRowStatus
Used to create/delete entries in the rcDiagMirrorByPortTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.2.1.7

rcDiagMacConvSteeringTable

table
.1.3.6.1.4.1.2272.1.23.3 · 1 row entry · 7 columns
Open in standard view 
Diag Mac Conv Steering Table
rcDiagMacConvSteeringEntry entry .1.3.6.1.4.1.2272.1.23.3.1
Entry containing infomation of Diag Mac Conv Steering.
Indexes
rcDiagMacConvSteeringId
Column Syntax OID
rcDiagMacConvSteeringId
Entry id.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.1
rcDiagMacConvSteeringSrcMac
Source MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.3.1.2
rcDiagMacConvSteeringDstMac
Destination MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.3.1.3
rcDiagMacConvSteeringInPort
IfIndex of ingress port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.4
rcDiagMacConvSteeringForwardPort
IfIndex of the port where captured traffic should
be forwarded to.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.5
rcDiagMacConvSteeringEnable
Enable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.3.1.6
rcDiagMacConvSteeringRowStatus
Used to create/delete entries in the rcDiagMirrorByPortTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.3.1.7

rcDiagVctTable

table
.1.3.6.1.4.1.2272.1.23.4 · 1 row entry · 28 columns
Open in standard view 
Diag Vct Table
rcDiagVctEntry entry .1.3.6.1.4.1.2272.1.23.4.1
Entry containing cable infomation and test result.
Indexes
rcDiagVctIfIndex
Column Syntax OID
rcDiagVctIfIndex
Port IfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2272.1.23.4.1.1
rcDiagVctNormalCableLength
Cable length, this indicates a range in which the
actual length falls.
Enumeration
Enumerated Values:
1cableLT50M
2cable50M80M
3cable80M110M
4cable110M140M
5cableGT140M
6cableUnknown
 .1.3.6.1.4.1.2272.1.23.4.1.2
rcDiagVctPhyType
Phy type, 100MHz throught 1 GHz, or broadcom phy.
Enumeration
Enumerated Values:
1phy100M
2phy1000M
3phy10000M
4phy100000M
5phyUnknown
6bcm5464
7bcm5464s
8bcm5664r
9bcm5248u
10bcm5248s
 .1.3.6.1.4.1.2272.1.23.4.1.3
rcDiagVctCableStatus
Status of the cable as a whole. The status of a
cable is in a sense, a summation of the status of its
pairs. If all the pairs are normal, then the cable is
normal. If the cable consists of zero or more normal
pairs a…
Enumeration
Enumerated Values:
1cableFail
2cableNormal
3cableOpen
4cableShorted
5cableNotApplicable
6cableUntested
 .1.3.6.1.4.1.2272.1.23.4.1.4
rcDiagVctPair1Status
The status of a single pair in the cable
Enumeration
Enumerated Values:
1pairFail
2pairNormal
3pairOpen
4pairShorted
5pairNotApplicable
6pairNotTested
7pairForce
8pinShort
 .1.3.6.1.4.1.2272.1.23.4.1.5
rcDiagVctPair1ErrLength
Error Pair Length, in meters, measured by Time
Domain Reflectometry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.4.1.6
rcDiagVctPair2Status
The status of a single pair in the cable
Enumeration
Enumerated Values:
1pairFail
2pairNormal
3pairOpen
4pairShorted
5pairNotApplicable
6pairNotTested
7pairForce
8pinShort
 .1.3.6.1.4.1.2272.1.23.4.1.7
rcDiagVctPair2ErrLength
Error Pair Length, in meters, measured by Time
Domain Reflectometry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.4.1.8
rcDiagVctPair3Status
The status of a single pair in the cable
Enumeration
Enumerated Values:
1pairFail
2pairNormal
3pairOpen
4pairShorted
5pairNotApplicable
6pairNotTested
7pairForce
8pinShort
 .1.3.6.1.4.1.2272.1.23.4.1.9
rcDiagVctPair3ErrLength
Error Pair Length, in meters, measured by Time
Domain Reflectometry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.4.1.10
rcDiagVctPair4Status
The status of a single pair in the cable
Enumeration
Enumerated Values:
1pairFail
2pairNormal
3pairOpen
4pairShorted
5pairNotApplicable
6pairNotTested
7pairForce
8pinShort
 .1.3.6.1.4.1.2272.1.23.4.1.11
rcDiagVctPair4ErrLength
Error Pair Length, in meters, measured by Time
Domain Reflectometry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.4.1.12
rcDiagVctStartTest
Start VCT test, Set this object to TRUE to perform
a VCT test on the current port. A get on this
object produces an undefines value.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.4.1.13
rcDiagVctTestDone
When a VCT test is started setting rcDiagVctStartTest,
this object is immediately set to FALSE by the switch
software. It remain FALSE until the test is completed,
when it is set to TRUE. When this object is TRUE,
then …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.4.1.14
rcDiagVctCableCategory
Cable type: CAT3 or CAT5.
Enumeration
Enumerated Values:
1cat3
2cat5
 .1.3.6.1.4.1.2272.1.23.4.1.15
rcDiagVctCableLength
Length of cable in meters based on average electrical
length of 4 pairs. Measurement can be done when
traffic is live or not.
MetersInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.4.1.16
rcDiagVctPair1Polarity
The polarity of a single pair in the cable.
Enumeration
Enumerated Values:
1inversed
2normal
3invalid
 .1.3.6.1.4.1.2272.1.23.4.1.17
rcDiagVctPair1Swap
The pair swap in the cable.
Enumeration
Enumerated Values:
1normal
2swapped
3invalid
4error
 .1.3.6.1.4.1.2272.1.23.4.1.18
rcDiagVctPair1Skew
Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.
Integer32
Constraints:
range: -1-15
 .1.3.6.1.4.1.2272.1.23.4.1.19
rcDiagVctPair2Polarity
The polarity of a single pair in the cable.
Enumeration
Enumerated Values:
1inversed
2normal
3invalid
 .1.3.6.1.4.1.2272.1.23.4.1.20
rcDiagVctPair2Swap
The pair swap in the cable.
Enumeration
Enumerated Values:
1normal
2swapped
3invalid
4error
 .1.3.6.1.4.1.2272.1.23.4.1.21
rcDiagVctPair2Skew
Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.
Integer32
Constraints:
range: -1-15
 .1.3.6.1.4.1.2272.1.23.4.1.22
rcDiagVctPair3Polarity
The polarity of a single pair in the cable.
Enumeration
Enumerated Values:
1inversed
2normal
3invalid
 .1.3.6.1.4.1.2272.1.23.4.1.23
rcDiagVctPair3Swap
The pair swap in the cable.
Enumeration
Enumerated Values:
1normal
2swapped
3invalid
4error
 .1.3.6.1.4.1.2272.1.23.4.1.24
rcDiagVctPair3Skew
Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.
Integer32
Constraints:
range: -1-15
 .1.3.6.1.4.1.2272.1.23.4.1.25
rcDiagVctPair4Polarity
The polarity of a single pair in the cable.
Enumeration
Enumerated Values:
1inversed
2normal
3invalid
 .1.3.6.1.4.1.2272.1.23.4.1.26
rcDiagVctPair4Swap
The pair swap in the cable.
Enumeration
Enumerated Values:
1normal
2swapped
3invalid
4error
 .1.3.6.1.4.1.2272.1.23.4.1.27
rcDiagVctPair4Skew
Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.
Integer32
Constraints:
range: -1-15
 .1.3.6.1.4.1.2272.1.23.4.1.28

rcDiagPcapFilterTable

table
.1.3.6.1.4.1.2272.1.23.15.11 · 1 row entry · 33 columns
Open in standard view 
A table used to store pcap secondary filters
rcDiagPcapFilterEntry entry .1.3.6.1.4.1.2272.1.23.15.11.1
Pcap secondary filter desc
Indexes
rcDiagPcapFilterId
Column Syntax OID
rcDiagPcapFilterId
Unique ID that represents the filter
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.15.11.1.1
rcDiagPcapFilterEnable
Filter is enabled or not
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.23.15.11.1.2
rcDiagPcapFilterAction
Action to be takesn when policy is matched
Enumerationr/w
Enumerated Values:
0drop
1capture
2trigger-on
3trigger-off
 .1.3.6.1.4.1.2272.1.23.15.11.1.3
rcDiagPcapFilterSrcMac
Soruce mac address to match
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.15.11.1.4
rcDiagPcapFilterSrcMask
Soruce mac address mask. Used to specify a range
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.23.15.11.1.5
rcDiagPcapFilterIsInverseSrcMac
Soruce mac address Inverse. when set the mac
addresses otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.6
rcDiagPcapFilterDstMac
Destination mac address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.15.11.1.7
rcDiagPcapFilterDstMask
Destination mac address mask. Used to specify a range
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.23.15.11.1.8
rcDiagPcapFilterIsInverseDstMac
Destination mac address Inverse. when set the mac
addresses otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.9
rcDiagPcapFilterVlanId
Vlan-id of the packet to be matched
Integer32r/w
Constraints:
range: 0-4092
 .1.3.6.1.4.1.2272.1.23.15.11.1.10
rcDiagPcapFilterToVlanId
To Vlan-id. Used to specify a range
Integer32r/w
Constraints:
range: 0-4092
 .1.3.6.1.4.1.2272.1.23.15.11.1.11
rcDiagPcapFilterIsInverseVlanId
Vlan-Id Inverse. when set the Vlan-Id
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.12
rcDiagPcapFilterPbit
pBit of the packet to be matched
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.23.15.11.1.13
rcDiagPcapFilterToPbit
To pBit. Used to specify a range
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.23.15.11.1.14
rcDiagPcapFilterIsInversePbit
pBit Inverse. when set the pBit
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.15
rcDiagPcapFilterEtherType
EtherType of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.11.1.16
rcDiagPcapFilterToEtherType
To EtherType. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.11.1.17
rcDiagPcapFilterIsInverseEtherType
EtherType Inverse. when set the EtherType
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.18
rcDiagPcapFilterProtocolType
ProtocolType of the packet to be matched
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.15.11.1.19
rcDiagPcapFilterToProtocolType
To ProtocolType. Used to specify a range
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.15.11.1.20
rcDiagPcapFilterIsInverseProtocolType
ProtocolType Inverse. when set the ProtocolType
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.21
rcDiagPcapFilterSrcIp
Source IP address of the packet to be matched
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.22
rcDiagPcapFilterToSrcIp
To Source IP address. Used to specify a range
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.23
rcDiagPcapFilterIsInverseSrcIp
Source IP address Inverse. when set the source IP
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.24
rcDiagPcapFilterDstIp
Destination IP address of the packet to be matched
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.25
rcDiagPcapFilterToDstIp
To Destination IP address. Used to specify a range
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.26
rcDiagPcapFilterIsInverseDstIp
Destination IP address Inverse. when set the
Destination IP other than specified is range
matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.27
rcDiagPcapFilterDscp
DSCP value of the packet to be matched
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.15.11.1.28
rcDiagPcapFilterToDscp
To DSCP. Used to specify a range
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.15.11.1.29
rcDiagPcapFilterIsInverseDscp
DSCP Inverse. when set the DSCP
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.30
rcDiagPcapFilterRowStatus
Row Status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.15.11.1.31
rcDiagPcapFilterDscpMatchZero
When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.32
rcDiagPcapFilterPbitMatchZero
When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.33

rcDiagPcapAdvancedFilterTable

table
.1.3.6.1.4.1.2272.1.23.15.13 · 1 row entry · 15 columns
Open in standard view 
A table used to store pcap secondary filters
rcDiagPcapAdvancedFilterEntry entry .1.3.6.1.4.1.2272.1.23.15.13.1
Pcap secondary Advanced filter desc
Indexes
rcDiagPcapAdvancedFilterId
Column Syntax OID
rcDiagPcapAdvancedFilterId
Unique ID that represents the filter
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.15.13.1.1
rcDiagPcapAdvancedFilterUdpPort
UdpPort of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.2
rcDiagPcapAdvancedFilterToUdpPort
To UdpPort. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.3
rcDiagPcapAdvancedFilterIsInverseUdpPort
UdpPort Inverse. when set the UdpPort
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.4
rcDiagPcapAdvancedFilterTcpPort
TcpPort of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.5
rcDiagPcapAdvancedFilterToTcpPort
To TcpPort. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.6
rcDiagPcapAdvancedFilterIsInverseTcpPort
TcpPort Inverse. when set the TcpPort
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.7
rcDiagPcapAdvancedFilterUserDefinedData
User defined data to match with the packets received
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.15.13.1.8
rcDiagPcapAdvancedFilterUserDefinedDataSize
Length of user defined data
Integer32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.2272.1.23.15.13.1.9
rcDiagPcapAdvancedFilterUserDefinedOffset
Offset from which match has to start
Integer32r/w
Constraints:
range: 0-9600
 .1.3.6.1.4.1.2272.1.23.15.13.1.10
rcDiagPcapAdvancedFilterIsInverseUserDefined
TcpPort Inverse. when set the Userdata
otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.11
rcDiagPcapAdvancedFilterTimer
Timer to start the pcap capture window in ms
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.23.15.13.1.12
rcDiagPcapAdvancedFilterPacketCount
Number of packets to be captured before disabling pcap
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.13
rcDiagPcapAdvancedFilterRefreshTimer
Refresh timer in ms
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.23.15.13.1.14
rcDiagPcapAdvancedFilterRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.15.13.1.15

rcDiagMonitorByIsidTable

table
.1.3.6.1.4.1.2272.1.23.18 · 1 row entry · 9 columns
Open in standard view 
This table is used to configure the Monitor By
Isid feature.  This feature allows the device
to analyze the packets which got mirrored into isid.
rcDiagMonitorByIsidEntry entry .1.3.6.1.4.1.2272.1.23.18.1
Entry containing monitor by isid information.
Indexes
rcDiagMonitorByIsidIndex
Column Syntax OID
rcDiagMonitorByIsidIndex
Entry id.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.18.1.1
rcDiagMonitorByIsidMonitorIsidOffset
Used to configure the monitoring ISID offset value.
The offset id value is mapped to actual monitor I-SID value
in which packets are mirrored to.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.18.1.2
rcDiagMonitorByIsidMonitorIsid
Actual monitor I-SID value in which packets are mirrored to
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.18.1.3
rcDiagMonitorByIsidEgressPortList
Egress ports to which traffic analyzers are connected.
RAPID-CITYPortSetr/w
Textual Convention: RAPID-CITYPortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.18.1.4
rcDiagMonitorByIsidEgressMltId
Egress MLT id to which traffic analyzers are connected.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.23.18.1.5
rcDiagMonitorByIsidMapToVlanId
VLAN id to map with mirrored traffic on the monitoring node.
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.2272.1.23.18.1.6
rcDiagMonitorByIsidNickname
Nickname of the BEB from which user wants to analyze the traffic.
RC-ISIS-MIBIsisPlsbNodeNickNamer/w
Textual Convention: RC-ISIS-MIBIsisPlsbNodeNickName OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.2272.1.23.18.1.7
rcDiagMonitorByIsidEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.18.1.8
rcDiagMonitorByIsidRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.18.1.9

rcDiagIsidMirroringStatsTable

table
.1.3.6.1.4.1.2272.1.23.19 · 1 row entry · 4 columns
Open in standard view 
This table is used to show/clear
number of packets which got mirrored into isid.
rcDiagIsidMirroringStatsEntry entry .1.3.6.1.4.1.2272.1.23.19.1
Entry containing isid mirroring stats information.
Indexes
rcDiagIsidMirroringStatsIndex
Column Syntax OID
rcDiagIsidMirroringStatsIndex
Offset id value which is mapped to actual monitor I-SID value.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.19.1.1
rcDiagIsidMirroringStatsMonitorIsid
Actual monitor I-SID value in which packets are mirrored to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.19.1.2
rcDiagIsidMirroringStatsMirroredPackets
Number of packets mirrored into ISID on the mirroring BEB.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.23.19.1.3
rcDiagIsidMirroringStatsClearStats
Used to clear the ISID mirroring statistics.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.19.1.4