rcDiagVctCableLength
RC-DIAG-MIB ·
.1.3.6.1.4.1.2272.1.23.4.1.16
Object
column
Meters Integer32
Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not.
Context
- MIB
- RC-DIAG-MIB
- OID
.1.3.6.1.4.1.2272.1.23.4.1.16- Type
- column
- Access
- readonly
- Status
- current
- Units
- Meters
- Parent
- rcDiagVctEntry
- Table
- rcDiagVctTable
- Siblings
- 27
Syntax
Meters Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDiagVctIfIndex Port IfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.23.4.1.1 |
| rcDiagVctPair3ErrLength Error Pair Length, in meters, measured by Time
Domain Reflectometry. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.10 |
| rcDiagVctPair4Status The status of a single pair in the cable | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.11 |
| rcDiagVctPair4ErrLength Error Pair Length, in meters, measured by Time
Domain Reflectometry. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.12 |
| rcDiagVctStartTest Start VCT test, Set this object to TRUE to perform
a VCT test on the current port. A get on this
object produces an undefines value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.4.1.13 |
| rcDiagVctTestDone When a VCT test is started setting rcDiagVctStartTest,
this object is immediately set to FALSE by the switch
software. It remain FALSE until the test is completed,
when it is set … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.4.1.14 |
| rcDiagVctCableCategory Cable type: CAT3 or CAT5. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.15 |
| rcDiagVctPair1Polarity The polarity of a single pair in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.17 |
| rcDiagVctPair1Swap The pair swap in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.18 |
| rcDiagVctPair1Skew Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occu… | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.19 |
| rcDiagVctNormalCableLength Cable length, this indicates a range in which the
actual length falls. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.2 |
| rcDiagVctPair2Polarity The polarity of a single pair in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.20 |
| rcDiagVctPair2Swap The pair swap in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.21 |
| rcDiagVctPair2Skew Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occu… | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.22 |
| rcDiagVctPair3Polarity The polarity of a single pair in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.23 |
| rcDiagVctPair3Swap The pair swap in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.24 |
| rcDiagVctPair3Skew Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occu… | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.25 |
| rcDiagVctPair4Polarity The polarity of a single pair in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.26 |
| rcDiagVctPair4Swap The pair swap in the cable. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.27 |
| rcDiagVctPair4Skew Differential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occu… | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.28 |
| rcDiagVctPhyType Phy type, 100MHz throught 1 GHz, or broadcom phy. | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.3 |
| rcDiagVctCableStatus Status of the cable as a whole. The status of a
cable is in a sense, a summation of the status of its
pairs. If all the pairs are normal, then the cable is
normal. If the cable… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.4 |
| rcDiagVctPair1Status The status of a single pair in the cable | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.5 |
| rcDiagVctPair1ErrLength Error Pair Length, in meters, measured by Time
Domain Reflectometry. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.6 |
| rcDiagVctPair2Status The status of a single pair in the cable | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.7 |
| rcDiagVctPair2ErrLength Error Pair Length, in meters, measured by Time
Domain Reflectometry. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.4.1.8 |
| rcDiagVctPair3Status The status of a single pair in the cable | column | Enumeration | .1.3.6.1.4.1.2272.1.23.4.1.9 |