rcDiagPcapFilterEnable
RC-DIAG-MIB ·
.1.3.6.1.4.1.2272.1.23.15.11.1.2
Object
Filter is enabled or not
Context
- MIB
- RC-DIAG-MIB
- OID
.1.3.6.1.4.1.2272.1.23.15.11.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcDiagPcapFilterEntry
- Table
- rcDiagPcapFilterTable
- Siblings
- 32
Syntax
RAPID-CITYEnableValue
- Source
- RAPID-CITYEnableValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDiagPcapFilterId Unique ID that represents the filter | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.1 |
| rcDiagPcapFilterVlanId Vlan-id of the packet to be matched | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.10 |
| rcDiagPcapFilterToVlanId To Vlan-id. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.11 |
| rcDiagPcapFilterIsInverseVlanId Vlan-Id Inverse. when set the Vlan-Id
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.12 |
| rcDiagPcapFilterPbit pBit of the packet to be matched | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.13 |
| rcDiagPcapFilterToPbit To pBit. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.14 |
| rcDiagPcapFilterIsInversePbit pBit Inverse. when set the pBit
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.15 |
| rcDiagPcapFilterEtherType EtherType of the packet to be matched | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.16 |
| rcDiagPcapFilterToEtherType To EtherType. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.17 |
| rcDiagPcapFilterIsInverseEtherType EtherType Inverse. when set the EtherType
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.18 |
| rcDiagPcapFilterProtocolType ProtocolType of the packet to be matched | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.19 |
| rcDiagPcapFilterToProtocolType To ProtocolType. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.20 |
| rcDiagPcapFilterIsInverseProtocolType ProtocolType Inverse. when set the ProtocolType
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.21 |
| rcDiagPcapFilterSrcIp Source IP address of the packet to be matched | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.22 |
| rcDiagPcapFilterToSrcIp To Source IP address. Used to specify a range | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.23 |
| rcDiagPcapFilterIsInverseSrcIp Source IP address Inverse. when set the source IP
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.24 |
| rcDiagPcapFilterDstIp Destination IP address of the packet to be matched | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.25 |
| rcDiagPcapFilterToDstIp To Destination IP address. Used to specify a range | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.26 |
| rcDiagPcapFilterIsInverseDstIp Destination IP address Inverse. when set the
Destination IP other than specified is range
matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.27 |
| rcDiagPcapFilterDscp DSCP value of the packet to be matched | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.28 |
| rcDiagPcapFilterToDscp To DSCP. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.29 |
| rcDiagPcapFilterAction Action to be takesn when policy is matched | column | Enumeration | .1.3.6.1.4.1.2272.1.23.15.11.1.3 |
| rcDiagPcapFilterIsInverseDscp DSCP Inverse. when set the DSCP
otherthan specified range is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.30 |
| rcDiagPcapFilterRowStatus Row Status | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.23.15.11.1.31 |
| rcDiagPcapFilterDscpMatchZero When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.32 |
| rcDiagPcapFilterPbitMatchZero When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.33 |
| rcDiagPcapFilterSrcMac Soruce mac address to match | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.4 |
| rcDiagPcapFilterSrcMask Soruce mac address mask. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.5 |
| rcDiagPcapFilterIsInverseSrcMac Soruce mac address Inverse. when set the mac
addresses otherthan specified is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.6 |
| rcDiagPcapFilterDstMac Destination mac address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.23.15.11.1.7 |
| rcDiagPcapFilterDstMask Destination mac address mask. Used to specify a range | column | Integer32 | .1.3.6.1.4.1.2272.1.23.15.11.1.8 |
| rcDiagPcapFilterIsInverseDstMac Destination mac address Inverse. when set the mac
addresses otherthan specified is matched | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.11.1.9 |