RAISECOM-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
79

raisecomBfdSessTable

table
.1.3.6.1.4.1.8886.1.35.1.2 · 1 row entry · 37 columns
Open in standard view 
The BFD Session Table describes the BFD sessions.
raisecomBfdSessEntry entry .1.3.6.1.4.1.8886.1.35.1.2.1
The BFD Session Entry describes BFD session.
Indexes
raisecomBfdSessIndex
Column Syntax OID
raisecomBfdSessIndex
This object contains an index used to represent a
unique BFD session on this device.
BfdSessIndexTC
Textual Convention: BfdSessIndexTC Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.1
raisecomBfdSessVersionNumber
The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.35.1.2.1.2
raisecomBfdSessType
This object specifies the type of this BFD session.
BfdSessTypeTCr/w
Textual Convention: BfdSessTypeTC Enumeration
Type Values:
1singleHop
2multiHopTotallyArbitraryPaths
3multiHopOutOfBandSignaling
4multiHopUnidirectionalLinks
5multiPointHead
6multiPointTail
 .1.3.6.1.4.1.8886.1.35.1.2.1.3
raisecomBfdSessDiscriminator
This object specifies the local discriminator for this BFD
session, used to uniquely identify it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.4
raisecomBfdSessRemoteDiscr
This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the session is in the down or adminDown(1) s…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.5
raisecomBfdSessDestinationUdpPort
This object specifies the destination UDP port number
used for this BFD session's control packets. The value
may be zero(0) if the session is in adminDown(1) state.
BfdCtrlDestPortNumberTCr/w
Textual Convention: BfdCtrlDestPortNumberTC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.8886.1.35.1.2.1.6
raisecomBfdSessSourceUdpPort
This object specifies the source UDP port number used
for this BFD session's control packets. The value may be
zero(0) if the session is in adminDown(1) state. Upon
creation of a new BFD session via this MIB, the value …
BfdCtrlSourcePortNumberTCr/w
Textual Convention: BfdCtrlSourcePortNumberTC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.8886.1.35.1.2.1.7
raisecomBfdSessEchoSourceUdpPort
This object specifies the source UDP port number used for
this BFD session's echo packets. The value may be zero(0)
if the session is not running in the echo mode, or the
session is in adminDown(1) state. Upon creation …
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.8886.1.35.1.2.1.8
raisecomBfdSessAdminStatus
A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' will cause
the BFD sesssion to be brought d…
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.8886.1.35.1.2.1.9
raisecomBfdSessState
BFD session state.
BfdSessStateTC
Textual Convention: BfdSessStateTC Enumeration
Type Values:
1adminDown
2down
3init
4up
5failing
 .1.3.6.1.4.1.8886.1.35.1.2.1.10
raisecomBfdSessRemoteHeardFlag
This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(2) if the…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.11
raisecomBfdSessDiag
A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state.
BfdDiagTC
Textual Convention: BfdDiagTC Enumeration
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
 .1.3.6.1.4.1.8886.1.35.1.2.1.12
raisecomBfdSessOperMode
This object specifies current operating mode that BFD
session is operating in.
BfdSessOperModeTCr/w
Textual Convention: BfdSessOperModeTC Enumeration
Type Values:
1asyncModeWEchoFunction
2asynchModeWOEchoFunction
3demandModeWEchoFunction
4demandModeWOEchoFunction
 .1.3.6.1.4.1.8886.1.35.1.2.1.13
raisecomBfdSessDemandModeDesiredFlag
This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.14
raisecomBfdSessControlPlaneIndepFlag
This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the co…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.15
raisecomBfdSessMultipointFlag
This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2)
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.16
raisecomBfdSessInterface
This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this BFD session.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.35.1.2.1.17
raisecomBfdSessSrcAddrType
This object specifies IP address type of the source IP
address of this BFD session. Only values unknown(0),
ipv4(1), ipv6(2), or ipv6z(4) have to be supported.
The value of unknown(0) is allowed only when the session
is…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.35.1.2.1.18
raisecomBfdSessSrcAddr
This object specifies the source IP address of this BFD
session.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.35.1.2.1.19
raisecomBfdSessDstAddrType
This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
have to be supported. The value of unknown(0) is …
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.35.1.2.1.20
raisecomBfdSessDstAddr
This object specifies the neighboring IP address which is
being monitored with this BFD session.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.35.1.2.1.21
raisecomBfdSessGTSM
Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.22
raisecomBfdSessGTSMTTL
This object is valid only when bfdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHop(1) session, if GTSM protection is enabled,
th…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.1.35.1.2.1.23
raisecomBfdSessDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used.
BfdIntervalTCr/w
Textual Convention: BfdIntervalTC Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.24
raisecomBfdSessReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
BfdIntervalTCr/w
Textual Convention: BfdIntervalTC Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.25
raisecomBfdSessReqMinEchoRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multihop BFD session.
BfdIntervalTCr/w
Textual Convention: BfdIntervalTC Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.26
raisecomBfdSessDetectMult
This object specifies the Detect time multiplier.
BfdMultiplierTCr/w
Textual Convention: BfdMultiplierTC Unsigned32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.8886.1.35.1.2.1.27
raisecomBfdSessNegotiatedInterval
This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets.
BfdIntervalTC
Textual Convention: BfdIntervalTC Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.28
raisecomBfdSessNegotiatedEchoInterval
This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running in echo mode.
BfdIntervalTC
Textual Convention: BfdIntervalTC Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.2.1.29
raisecomBfdSessNegotiatedDetectMult
This object specifies the Detect time multiplier.
BfdMultiplierTC
Textual Convention: BfdMultiplierTC Unsigned32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.8886.1.35.1.2.1.30
raisecomBfdSessAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.2.1.31
raisecomBfdSessAuthenticationType
The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…
BfdSessAuthenticationTypeTCr/w
Textual Convention: BfdSessAuthenticationTypeTC Enumeration
Type Values:
-1noAuthentication
0reserved
1simplePassword
2keyedMD5
3meticulousKeyedMD5
4keyedSHA1
5meticulousKeyedSHA1
 .1.3.6.1.4.1.8886.1.35.1.2.1.32
raisecomBfdSessAuthenticationKeyID
The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When bfdSessAuthPresFlag is false(2), then the value
of this object MUST be -1. The value -1 indicates …
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.8886.1.35.1.2.1.33
raisecomBfdSessAuthenticationKey
The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the bfdSessAuthentication type is one of the key…
BfdSessionAuthenticationKeyTCr/w
Textual Convention: BfdSessionAuthenticationKeyTC OctetString
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.8886.1.35.1.2.1.34
raisecomBfdSessStorType
This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.8886.1.35.1.2.1.35
raisecomBfdSessRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
bfdSessRowStatus and bfdSessStorag…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.35.1.2.1.36
raisecomBfdSessTemplateName
This object specifies the name of BFD template.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.8886.1.35.1.2.1.37

raisecomBfdSessPerfTable

table
.1.3.6.1.4.1.8886.1.35.1.3 · 1 row entry · 19 columns
Open in standard view 
This table specifies BFD Session performance counters.
raisecomBfdSessPerfEntry entry .1.3.6.1.4.1.8886.1.35.1.3.1
An entry in this table is created by a BFD-enabled node
for every BFD Session. bfdSessPerfDiscTime is used to
indicate potential discontinuity for all counter objects
in this table.
Indexes
No indexes recorded
Column Syntax OID
raisecomBfdSessPerfCtrlPktIn
The total number of BFD control messages received for this
BFD session. This value MUST be equal to the least
significant 32 bits of bfdSessPerfCtrlPktInHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.1
raisecomBfdSessPerfCtrlPktOut
The total number of BFD control messages sent for this BFD
session. This value MUST be equal to the least significant
32 bits of bfdSessPerfCtrlPktOutHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.2
raisecomBfdSessPerfCtrlPktDrop
The total number of BFD control messages received for this
session yet dropped for being invalid. This value MUST be
equal to the least significant 32 bits of
bfdSessPerfCtrlPktDropHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.3
raisecomBfdSessPerfCtrlPktDropLastTime
The value of sysUpTime on the most recent occasion at
which received BFD control message for this session was
dropped. If no such up event exists, this object contains
a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.8886.1.35.1.3.1.4
raisecomBfdSessPerfEchoPktIn
The total number of BFD echo messages received for this
BFD session. This value MUST be equal to the least
significant 32 bits of bfdSessPerfEchoPktInHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.5
raisecomBfdSessPerfEchoPktOut
The total number of BFD echo messages sent for this BFD
session. This value MUST be equal to the least significant
32 bits of bfdSessPerfEchoPktOutHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.6
raisecomBfdSessPerfEchoPktDrop
The total number of BFD echo messages received for this
session yet dropped for being invalid. This value MUST be
equal to the least significant 32 bits of
bfdSessPerfEchoPktDropHC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.7
raisecomBfdSessPerfEchoPktDropLastTime
The value of sysUpTime on the most recent occasion at
which received BFD echo message for this session was
dropped. If no such up event exists, this object contains
a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.8886.1.35.1.3.1.8
raisecomBfdSessUpTime
The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.8886.1.35.1.3.1.9
raisecomBfdSessPerfLastSessDownTime
The value of sysUpTime on the most recent occasion at
which the last time communication was lost with the
neighbor. If no such down event exist this object
contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.8886.1.35.1.3.1.10
raisecomBfdSessPerfLastCommLostDiag
The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value.
BfdDiagTC
Textual Convention: BfdDiagTC Enumeration
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
 .1.3.6.1.4.1.8886.1.35.1.3.1.11
raisecomBfdSessPerfSessUpCount
The number of times this session has gone into the Up
state since the system last rebooted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.3.1.12
raisecomBfdSessPerfDiscTime
The value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.
The relevant counters are the specific instances associated
with this BFD session of any Coun…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.8886.1.35.1.3.1.13
raisecomBfdSessPerfCtrlPktInHC
This value represents the total number of BFD control
messages received for this BFD session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.14
raisecomBfdSessPerfCtrlPktOutHC
This value represents the total number of BFD control
messages transmitted for this BFD session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.15
raisecomBfdSessPerfCtrlPktDropHC
This value represents the total number of BFD control
messages received for this BFD session yet dropped for
being invalid.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.16
raisecomBfdSessPerfEchoPktInHC
This value represents the total number of BFD echo
messages received for this BFD session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.17
raisecomBfdSessPerfEchoPktOutHC
This value represents the total number of BFD echo
messages transmitted for this BFD session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.18
raisecomBfdSessPerfEchoPktDropHC
This value represents the total number of BFD echo
messages received for this BFD session yet dropped
for being invalid.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.35.1.3.1.19

raisecomBfdSessDiscMapTable

table
.1.3.6.1.4.1.8886.1.35.1.4 · 1 row entry · 1 columns
Open in standard view 
The BFD Session Discriminator Mapping Table maps a
local discriminator value to associated BFD session's
BfdSessIndexTC used in the bfdSessionTable.
raisecomBfdSessDiscMapEntry entry .1.3.6.1.4.1.8886.1.35.1.4.1
The BFD Session Discriminator Map Entry describes
BFD session that is mapped to this BfdSessIndexTC.
Indexes
raisecomBfdSessDiscriminator
Column Syntax OID
raisecomBfdSessDiscMapIndex
This object specifies the BfdSessIndexTC referred to by
the indices of this row. In essence, a mapping is
provided between these indexes and the BfdSessTable.
BfdSessIndexTC
Textual Convention: BfdSessIndexTC Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.8886.1.35.1.4.1.1

raisecomBfdSessIpMapTable

table
.1.3.6.1.4.1.8886.1.35.1.5 · 1 row entry · 1 columns
Open in standard view 
The BFD Session IP Mapping Table maps given
bfdSessInterface, bfdSessSrcAddrType, bfdSessSrcAddr,
bfdSessDstAddrType and bfdSessDstAddr
to an associated BFD session's BfdSessIndexTC used in
the bfdSessionTable.
raisecomBfdSessIpMapEntry entry .1.3.6.1.4.1.8886.1.35.1.5.1
The BFD Session IP Map Entry describes
BFD session that is mapped to this BfdSessIndexTC.
Indexes
raisecomBfdSessInterface raisecomBfdSessSrcAddrType raisecomBfdSessSrcAddr raisecomBfdSessDstAddrType raisecomBfdSessDstAddr
Column Syntax OID
raisecomBfdSessIpMapIndex
This object specifies the BfdSessIndexTC referred to by
the indexes of this row. In essence, a mapping is
provided between these indexes and the BfdSessTable.
BfdSessIndexTC
Textual Convention: BfdSessIndexTC Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.8886.1.35.1.5.1.1

raisecomBfdIfTable

table
.1.3.6.1.4.1.8886.1.35.1.6 · 1 row entry · 10 columns
Open in standard view 
This table contains session information of this interface.
raisecomBfdIfEntry entry .1.3.6.1.4.1.8886.1.35.1.6.1
Session information of this interface.
Indexes
raisecomBfdIfIndex
Column Syntax OID
raisecomBfdIfIndex
This object contains an interface index used to indicate
the interface which this BFD session is running on.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.6.1.1
raisecomBfdIfDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets in this interface.
The value of zero(0) is reserved, and should not be used.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.6.1.2
raisecomBfdIfReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.6.1.3
raisecomBfdIfDetectMult
This object specifies the Detect time multiplier.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.6.1.4
raisecomBfdIfReqMinEchoRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
not support echo function.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.6.1.5
raisecomBfdIfAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.6.1.6
raisecomBfdIfAuthenticationType
The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…
BfdSessAuthenticationTypeTCr/w
Textual Convention: BfdSessAuthenticationTypeTC Enumeration
Type Values:
-1noAuthentication
0reserved
1simplePassword
2keyedMD5
3meticulousKeyedMD5
4keyedSHA1
5meticulousKeyedSHA1
 .1.3.6.1.4.1.8886.1.35.1.6.1.7
raisecomBfdIfAuthenticationKeyID
The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When bfdSessAuthPresFlag is false(2), then the value
of this object MUST be -1. The value -1 indicates …
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.8886.1.35.1.6.1.8
raisecomBfdIfAuthenticationKey
The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the bfdSessAuthentication type is one of the key…
BfdSessionAuthenticationKeyTCr/w
Textual Convention: BfdSessionAuthenticationKeyTC OctetString
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.8886.1.35.1.6.1.9
raisecomBfdIfDemandModeDesiredFlag
This object indicates that the local if's
desire to use Demand mode. Specifically, it is set
to true(1) if the local if wishes to use
Demand mode or false(2) if not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.6.1.10

raisecomBfdTemplateTable

table
.1.3.6.1.4.1.8886.1.35.1.7 · 1 row entry · 11 columns
Open in standard view 
This table contains session information of this BFD template.
raisecomBfdTemplateEntry entry .1.3.6.1.4.1.8886.1.35.1.7.1
Session information of this BFD template.
Indexes
raisecomBfdTemplateName
Column Syntax OID
raisecomBfdTemplateName
This object specifies the name of BFD template.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.8886.1.35.1.7.1.1
raisecomBfdTemplateType
This object specifies the type of this BFD session template.
BfdSessTypeTCr/w
Textual Convention: BfdSessTypeTC Enumeration
Type Values:
1singleHop
2multiHopTotallyArbitraryPaths
3multiHopOutOfBandSignaling
4multiHopUnidirectionalLinks
5multiPointHead
6multiPointTail
 .1.3.6.1.4.1.8886.1.35.1.7.1.2
raisecomBfdTemplateDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets in this template.
The value of zero(0) is reserved, and should not be used.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.7.1.3
raisecomBfdTemplateReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.7.1.4
raisecomBfdTemplateDetectMult
This object specifies the Detect time multiplier.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.35.1.7.1.5
raisecomBfdTemplateAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.7.1.6
raisecomBfdTemplateAuthenticationType
The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…
BfdSessAuthenticationTypeTCr/w
Textual Convention: BfdSessAuthenticationTypeTC Enumeration
Type Values:
-1noAuthentication
0reserved
1simplePassword
2keyedMD5
3meticulousKeyedMD5
4keyedSHA1
5meticulousKeyedSHA1
 .1.3.6.1.4.1.8886.1.35.1.7.1.7
raisecomBfdTemplateAuthenticationKeyID
The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When bfdSessAuthPresFlag is false(2), then the value
of this object MUST be -1. The value -1 indicates …
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.8886.1.35.1.7.1.8
raisecomBfdTemplateAuthenticationKey
The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the bfdSessAuthentication type is one of the key…
BfdSessionAuthenticationKeyTCr/w
Textual Convention: BfdSessionAuthenticationKeyTC OctetString
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.8886.1.35.1.7.1.9
raisecomBfdTemplateDemandModeDesiredFlag
This object indicates that the local template's
desire to use Demand mode. Specifically, it is set
to true(1) if the local template wishes to use
Demand mode or false(2) if not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.35.1.7.1.10
raisecomBfdTemplateRowStatus
Row status of this template.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.35.1.7.1.11