raisecomBfdIfReqMinRxInterval
RAISECOM-BFD-MIB ·
.1.3.6.1.4.1.8886.1.35.1.6.1.3
Object
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets.
Context
- MIB
- RAISECOM-BFD-MIB
- OID
.1.3.6.1.4.1.8886.1.35.1.6.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- raisecomBfdIfEntry
- Table
- raisecomBfdIfTable
- Siblings
- 9
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomBfdIfIndex This object contains an interface index used to indicate
the interface which this BFD session is running on. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.35.1.6.1.1 |
| raisecomBfdIfDemandModeDesiredFlag This object indicates that the local if's
desire to use Demand mode. Specifically, it is set
to true(1) if the local if wishes to use
Demand mode or false(2) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.6.1.10 |
| raisecomBfdIfDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets in this interface.
The value of zero(0)… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.35.1.6.1.2 |
| raisecomBfdIfDetectMult This object specifies the Detect time multiplier. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.35.1.6.1.4 |
| raisecomBfdIfReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
not support echo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.35.1.6.1.5 |
| raisecomBfdIfAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.6.1.6 |
| raisecomBfdIfAuthenticationType The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication r… | column | BfdSessAuthenticationTypeTC | .1.3.6.1.4.1.8886.1.35.1.6.1.7 |
| raisecomBfdIfAuthenticationKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When bfdSessAuthPresFlag is false(2), then the value
of this obj… | column | Integer32 | .1.3.6.1.4.1.8886.1.35.1.6.1.8 |
| raisecomBfdIfAuthenticationKey The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the bfdS… | column | BfdSessionAuthenticationKeyTC | .1.3.6.1.4.1.8886.1.35.1.6.1.9 |