raisecomBfdSessTemplateName
RAISECOM-BFD-MIB ·
.1.3.6.1.4.1.8886.1.35.1.2.1.37
Object
column
r/w
OctetString
This object specifies the name of BFD template.
Context
- MIB
- RAISECOM-BFD-MIB
- OID
.1.3.6.1.4.1.8886.1.35.1.2.1.37- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- raisecomBfdSessEntry
- Table
- raisecomBfdSessTable
- Siblings
- 36
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomBfdSessIndex This object contains an index used to represent a
unique BFD session on this device. | column | BfdSessIndexTC | .1.3.6.1.4.1.8886.1.35.1.2.1.1 |
| raisecomBfdSessState BFD session state. | column | BfdSessStateTC | .1.3.6.1.4.1.8886.1.35.1.2.1.10 |
| raisecomBfdSessRemoteHeardFlag This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.11 |
| raisecomBfdSessDiag A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state. | column | BfdDiagTC | .1.3.6.1.4.1.8886.1.35.1.2.1.12 |
| raisecomBfdSessOperMode This object specifies current operating mode that BFD
session is operating in. | column | BfdSessOperModeTC | .1.3.6.1.4.1.8886.1.35.1.2.1.13 |
| raisecomBfdSessDemandModeDesiredFlag This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.14 |
| raisecomBfdSessControlPlaneIndepFlag This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.15 |
| raisecomBfdSessMultipointFlag This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.16 |
| raisecomBfdSessInterface This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this B… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.8886.1.35.1.2.1.17 |
| raisecomBfdSessSrcAddrType This object specifies IP address type of the source IP
address of this BFD session. Only values unknown(0),
ipv4(1), ipv6(2), or ipv6z(4) have to be supported.
The value of unknow… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.8886.1.35.1.2.1.18 |
| raisecomBfdSessSrcAddr This object specifies the source IP address of this BFD
session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.8886.1.35.1.2.1.19 |
| raisecomBfdSessVersionNumber The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.35.1.2.1.2 |
| raisecomBfdSessDstAddrType This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
have to b… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.8886.1.35.1.2.1.20 |
| raisecomBfdSessDstAddr This object specifies the neighboring IP address which is
being monitored with this BFD session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.8886.1.35.1.2.1.21 |
| raisecomBfdSessGTSM Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.22 |
| raisecomBfdSessGTSMTTL This object is valid only when bfdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHop(1) se… | column | Unsigned32 | .1.3.6.1.4.1.8886.1.35.1.2.1.23 |
| raisecomBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and s… | column | BfdIntervalTC | .1.3.6.1.4.1.8886.1.35.1.2.1.24 |
| raisecomBfdSessReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified… | column | BfdIntervalTC | .1.3.6.1.4.1.8886.1.35.1.2.1.25 |
| raisecomBfdSessReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multih… | column | BfdIntervalTC | .1.3.6.1.4.1.8886.1.35.1.2.1.26 |
| raisecomBfdSessDetectMult This object specifies the Detect time multiplier. | column | BfdMultiplierTC | .1.3.6.1.4.1.8886.1.35.1.2.1.27 |
| raisecomBfdSessNegotiatedInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets. | column | BfdIntervalTC | .1.3.6.1.4.1.8886.1.35.1.2.1.28 |
| raisecomBfdSessNegotiatedEchoInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running… | column | BfdIntervalTC | .1.3.6.1.4.1.8886.1.35.1.2.1.29 |
| raisecomBfdSessType This object specifies the type of this BFD session. | column | BfdSessTypeTC | .1.3.6.1.4.1.8886.1.35.1.2.1.3 |
| raisecomBfdSessNegotiatedDetectMult This object specifies the Detect time multiplier. | column | BfdMultiplierTC | .1.3.6.1.4.1.8886.1.35.1.2.1.30 |
| raisecomBfdSessAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.35.1.2.1.31 |
| raisecomBfdSessAuthenticationType The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication r… | column | BfdSessAuthenticationTypeTC | .1.3.6.1.4.1.8886.1.35.1.2.1.32 |
| raisecomBfdSessAuthenticationKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When bfdSessAuthPresFlag is false(2), then the value
of this obj… | column | Integer32 | .1.3.6.1.4.1.8886.1.35.1.2.1.33 |
| raisecomBfdSessAuthenticationKey The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the bfdS… | column | BfdSessionAuthenticationKeyTC | .1.3.6.1.4.1.8886.1.35.1.2.1.34 |
| raisecomBfdSessStorType This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.8886.1.35.1.2.1.35 |
| raisecomBfdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified excep… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.1.35.1.2.1.36 |
| raisecomBfdSessDiscriminator This object specifies the local discriminator for this BFD
session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.8886.1.35.1.2.1.4 |
| raisecomBfdSessRemoteDiscr This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the … | column | Unsigned32 | .1.3.6.1.4.1.8886.1.35.1.2.1.5 |
| raisecomBfdSessDestinationUdpPort This object specifies the destination UDP port number
used for this BFD session's control packets. The value
may be zero(0) if the session is in adminDown(1) state. | column | BfdCtrlDestPortNumberTC | .1.3.6.1.4.1.8886.1.35.1.2.1.6 |
| raisecomBfdSessSourceUdpPort This object specifies the source UDP port number used
for this BFD session's control packets. The value may be
zero(0) if the session is in adminDown(1) state. Upon
creation of a … | column | BfdCtrlSourcePortNumberTC | .1.3.6.1.4.1.8886.1.35.1.2.1.7 |
| raisecomBfdSessEchoSourceUdpPort This object specifies the source UDP port number used for
this BFD session's echo packets. The value may be zero(0)
if the session is not running in the echo mode, or the
session … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.8886.1.35.1.2.1.8 |
| raisecomBfdSessAdminStatus A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' wil… | column | Enumeration | .1.3.6.1.4.1.8886.1.35.1.2.1.9 |