RAD-ds1Interface-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
83
dsx1XCurrentTable
table.1.3.6.1.4.1.164.3.1.6.4.1.2
·
1 row entry
·
14 columns
A list of current statistics entries. This table contains additional objects for the current table.
An entry containing additional statistical counters
applicable to a particular current table.
applicable to a particular current table.
Indexes
DS1-MIBdsx1CurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx1CurrentLOS
The counter associated with the number of LOS
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1 |
|
dsx1CurrentLOF
The counter associated with the number of LOF
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2 |
|
dsx1CurrentLOC
Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation . |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3 |
|
dsx1CurrentAIS
The counter associated with the number of AIS
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4 |
|
dsx1CurrentRAI
Remote Alarm Indication: Transmitted in the outgoing direction
(toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss of… |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5 |
|
dsx1CurrentLOMF
Loss of Multi-Frame sequence in E1 time slot 16.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6 |
|
dsx1CurrentFEBE
Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7 |
|
dsx1CurrentStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8 |
|
dsx1CurrentBPV
The counter associated with the number of BPVs (Bi-Polar Violations)
encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9 |
|
dsx1CurrentLOCRCMF
Loss of CRC4 Multi-Frame sequence in E1.
encountered in the current 15 minute interval |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10 |
|
dsx1CurrentLOFC
Counts the number of loss of frame events measured.
encountered in the current 15 minute interval |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11 |
|
dsx1CurrentCRCErrors
Counts the number of CRC error events,
encountered in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.12 |
|
dsx1CurrentLSES
Counts the number of LSES (Line Severely Errored Seconds)
encountered in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.13 |
|
dsx1CurrentFC
Counts the number of FC (Path failure events) encountered
in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.14 |
.1.3.6.1.4.1.164.3.1.6.4.1.3
·
1 row entry
·
13 columns
A list of Interval entries. This table contains additional objects for the interval table.
An entry containing additional statistical counters
applicable to a particular interval table.
applicable to a particular interval table.
| Column | Syntax | OID |
|---|---|---|
|
dsx1IntervalLOS
deprecated
The counter associated with the number of LOS
seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.1 |
|
dsx1IntervalLOF
deprecated
The counter associated with the number of OOF
seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.2 |
|
dsx1IntervalLOC
Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation . |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.3 |
|
dsx1IntervalAIS
deprecated
The counter associated with the number of AIS
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.4 |
|
dsx1IntervalRAI
deprecated
Remote Alarm Indication: Transmitted in the outgoing direction
(toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss of… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.5 |
|
dsx1IntervalLOMF
Loss of Multi-Frame sequence in E1 time slot 16.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.6 |
|
dsx1IntervalFEBE
Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.7 |
|
dsx1IntervalStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.8 |
|
dsx1IntervalBPV
The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.9 |
|
dsx1IntervalLOCRCMF
Loss of CRC4 Multi-Frame sequence in E1.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.10 |
|
dsx1IntervalLOFC
Counts the number of loss of frame events measured
in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.11 |
|
dsx1IntervalLSES
deprecated
Counts the number of LSES (Line Severely Errored Seconds)
encountered in the 15 minute interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.13 |
|
dsx1IntervalFC
deprecated
Counts the number of FC (Path failure events) encountered
in the 15 minute interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.14 |
dsx1XTotalTable
table.1.3.6.1.4.1.164.3.1.6.4.1.4
·
1 row entry
·
8 columns
A list of Total statistics entries. This table contains additional objects for the Total table.
An entry containing additional statistical counters
applicable to a particular total table.
applicable to a particular total table.
Indexes
DS1-MIBdsx1TotalIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx1TotalLOS
The counter associated with the number of LOS (Loss of
Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.1 |
|
dsx1TotalLOF
The counter associated with the number of LOF (Loss of
Frame) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.2 |
|
dsx1TotalAIS
The counter associated with the number of AIS (Alarm
Indication Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.4 |
|
dsx1TotalRAI
The counter associated with the number of RAIS (Remote
Alarm Indication) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.5 |
|
dsx1TotalBPV
The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.9 |
|
dsx1TotalLOFC
The counter associated with the number loss of frames
encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.11 |
|
dsx1TotalLSES
Counts the number of LSES (Line Severely Errored Seconds)
encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.13 |
|
dsx1TotalFC
Counts the number of FC (Path failure events) encountered
by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.14 |
dsx1DataStreamStatTable
table.1.3.6.1.4.1.164.3.1.6.4.1.5
·
1 row entry
·
11 columns
The DS1 Data Stream Statistics table.
An entry in the DS1 Data Stream Statistics table.
Indexes
dsx1DataStreamStatIfIndex dsx1DataStreamStatIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx1DataStreamStatIfIndex
The index of the DS1 interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.1 |
||||
|
dsx1DataStreamStatIndex
The DS1 Data Stream Index.
For Vmux - the following indices are used: 1 for Transparent 2-3 for SS71-SS72 (respectively) 4-7 for Data1-Data4 (respectively) 8 for HDLC Ph2 Compatible 9-16 for Sub-CH1-1...… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.2 |
||||
|
dsx1DataStreamStatValid
Indicates whether this Data Stream is valid or not.
When invalid - all counters are irrelevant. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.3 |
||||
|
dsx1DataStreamStatInFrames
The counter associated with the number of received frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.4 |
||||
|
dsx1DataStreamStatInBytes
The counter associated with the number of received bytes,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.5 |
||||
|
dsx1DataStreamStatInDiscards
The counter associated with the number of Discarded incoming frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.6 |
||||
|
dsx1DataStreamStatInErrors
The counter associated with the number of received Errored frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.7 |
||||
|
dsx1DataStreamStatOutFrames
The counter associated with the number of transmitted frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.8 |
||||
|
dsx1DataStreamStatOutBytes
The counter associated with the number of transmitted bytes,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.9 |
||||
|
dsx1DataStreamStatOutDiscards
The counter associated with the number of Discarded outgoing frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.10 |
||||
|
dsx1DataStreamStatOutErrors
The counter associated with the number of errored transmitted frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.11 |
dsx1XConfigTable
table.1.3.6.1.4.1.164.3.1.6.4.2
·
1 row entry
·
30 columns
An extension to the DS1 Configuration table.
An entry containing additional configuration
parameters.
parameters.
Indexes
DS1-MIBdsx1LineIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1IdleCode
Byte pattern of the data received/transmitted in the
E1T1 framer idle timeslots. Valid range: (0 - FF HEX). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.1 |
||||||||||||||
|
dsx1LineMode
T1 device operation mode.
Valid for T1 only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.2 |
||||||||||||||
|
dsx1dBTxGain
Transmit line Gain for T1 CSU line mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.3 |
||||||||||||||
|
dsx1RxSensitivity
Low Sensitivity is considered Short Haul while High Sensitivity
is considered Long Haul. The actual values depend on the LIU. Examples: - E1: -12dB is considered Short Haul ; -43dB is considered Long Haul - T1: -12dB is… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.4 |
||||||||||||||
|
dsx1RestoreTime
Used to change the sync. algorithms to reduce the time
required for the port to return to normal operation after a RED alarm. 'sec1' = Fast, 'sec10' = TR-6211, 'immediate' = CCITT |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.5 |
||||||||||||||
|
dsx1TcFirstSignal
Trunk conditioning signal - value to be sent as a signal
during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. This variable is used also for Space Signaling Code (in this cas… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.6 |
||||||||||||||
|
dsx1TcSignal
Trunk conditioning signal value after alarm detection.
Range is 0x1..0xF for E1, and 0x0..0xF for T1. This variable is used also for Space Signaling Code (E1 and T1). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.7 |
||||||||||||||
|
dsx1TcPattern
Trunk conditioning data pattern to be sent upon a DS0 fail.
Range is 0x0..0xFF. This variable used also for Out of Service Code. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.8 |
||||||||||||||
|
dsx1Scramble
Scrambling is an operation that randomizes the bits
of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the HEC. Not applicable for E1. active - will scramble/descram… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.9 |
||||||||||||||
|
dsx1LineAdaptiveTimingMode
Enables end to end clock synchronization.
Default value - off. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.10 |
||||||||||||||
|
dsx1TxClockSource
The source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock i… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.11 |
||||||||||||||
|
dsx1AisEnable
Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.12 |
||||||||||||||
|
dsx1TsEchoCancel
This parameter defines for each TS whether Echo-Cancellation is on.
Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,.., 4th octet bit'7' = TS#32. Octets and bi… |
OctetStringr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.13 |
||||||||||||||
|
dsx1EchoCancelerModule
This parameter indicates whether echo-cancellation module
exists for this line. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.14 |
||||||||||||||
|
dsx1PortFunction
This object determines the ATM Mode over the
physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port will function as an IMA-ATM. cesPsn - The port will… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.15 |
||||||||||||||
|
dsx1PortMultiplier
This object determines the data rate of each TS
(Kbps units). This parameter is applicable for T1 only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.16 |
||||||||||||||
|
dsx1LeasedLine
This parameter defines whether Line mode is regular (non Leased Line mode)
or transparent (Leased Line mode). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.17 |
||||||||||||||
|
dsx1CsuLoop
This parameter defines where the CSU loop will be done:
local - locally (by IPmux) towards the TDM device transparent - transferred to Remote Device that will send it to its connected TDM device. remote - … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.18 |
||||||||||||||
|
dsx1ClockSource
This entry specifies the source from which the clock will be taken.
Refer to device specification for source Index |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.19 |
||||||||||||||
|
dsx1OosSignal
This parameter defines the value to be sent as a signal
after alarm detection: 'Space' = both A and B signaling bits are forced to '0' during out-of-service periods. 'Mark' = both A and B signaling bits a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.20 |
||||||||||||||
|
dsx1BundleNextIndex
This parameter indicates the Next free Bundle Index for this DS1 port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.21 |
||||||||||||||
|
dsx1CRC6CalcMode
This object determines the CRC6 Calculation mode.
jtG704 =JT-G704 = the Japanese standard ituG704=ITU-G704 = the International standard This parameter is applicable for J1 only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.22 |
||||||||||||||
|
dsx1SendUponFail
This object determines which notification will be sent to the other side
upon fail of another interface. In Ipmux14 the notification is sent upon failure of the Ethernet link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.23 |
||||||||||||||
|
dsx1InbandLoopSignal
This parameter defines the signal pattern for inband loopback
activation and deactivation: csu Applicable only for SF (D4) and ESF line types Defined in AT&T TR54016 and ANSI T1.403. Loop-up pattern - 000… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.24 |
||||||||||||||
|
dsx1InbandLoopUpCode
This parameter specifies the inband signal pattern that shall
cause activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the value… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.25 |
||||||||||||||
|
dsx1InbandLoopUpLength
This parameter specifies the length, in bits, of the inband
signal pattern that shall cause activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or … |
bitsUnsigned32r/w Constraints: range: 3-8 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.26 |
||||||||||||||
|
dsx1InbandLoopDownCode
This parameter specifies the inband signal pattern that shall
cause de-activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the va… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.27 |
||||||||||||||
|
dsx1InbandLoopDownLength
This parameter specifies the length, in bits, of the inband
signal pattern that shall cause de-activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) … |
bitsUnsigned32r/w Constraints: range: 3-8 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.28 |
||||||||||||||
|
dsx1TxClockInstance
When dsx1TransmitClockSource is set to throughTiming(3) or
adaptive(4), this parameter specifies the instance of the clock domain or recovered clock, respectively, that shall be used for transmission. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.29 |
||||||||||||||
|
dsx1TxPortQuality
This object indicates the port clock quality.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.30 |
dsx1XStatThresholdTable
table.1.3.6.1.4.1.164.3.1.6.4.3
·
1 row entry
·
7 columns
An extension to the DS1 Configuration table that defines
DS1 statistics thresholds.
'Line' means a physical transport of digital information at
nominal rate of 2.048Mbps or 1.544Mbps.
'Path' means a framed digital signal at nominal rate of
2.048Mbps or 1.544Mbps independent of the specific
transmission equipment.
An entry containing statistics thresholds for DS1 port.
Indexes
DS1-MIBdsx1LineIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx1LineIntervalLesThreshold
This object configures the threshold for the number of
Error Seconds (ES) within any given 15-minute performance Line data collection interval. If the value of Error Seconds in a particular 15-minute collection interval… |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.1 |
|
dsx1PathIntervalCvThreshold
This object configures the threshold for the number of
Code Violations (CV) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interv… |
Unsigned32r/w Constraints: range: 0-16383 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.2 |
|
dsx1PathIntervalEsThreshold
This object configures the threshold for the number of
Error Seconds (ES) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval… |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.3 |
|
dsx1PathIntervalSesThreshold
This object configures the threshold for the number of
Severe Error Seconds (SES) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection … |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.4 |
|
dsx1PathIntervalSefsThreshold
This object configures the threshold for the number of
Severely Errored Framing Seconds (SEFS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minut… |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.5 |
|
dsx1PathIntervalCssThreshold
This object configures the threshold for the number of
Controlled Slip Seconds (CSS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collecti… |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.6 |
|
dsx1PathIntervalUasThreshold
This object configures the threshold for the number of
Unavailable Seconds (UAS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection i… |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.164.3.1.6.4.3.1.7 |