PPM-IGNIS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
222
slotsTable
table.1.3.6.1.4.1.31225.1.1.4.1
·
1 row entry
·
213 columns
A table detailing the configuration and status information for the modules in the ViaLiteHD chassis
A single slot entry.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
modIx
Module index in slots table. Corresponds to module slot in the ViaLiteHD chassis
|
Integer32 | .1.3.6.1.4.1.31225.1.1.4.1.1.1 |
|
modType
Module type.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.2 |
|
modPN
Module part number.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.3 |
|
modFWPN
Module firmware part number.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.4 |
|
modFWVer
Module firmware version and build date/time.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.5 |
|
modSN
Module serial number.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.6 |
|
modOemNumber
Module OEM number.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.7 |
|
modCustomerID
Module customer ID.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.8 |
|
modMonLifeCounter
Module working hours counter. Increments every 2 hours of continuous operation.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.9 |
|
modMonPanelComp
Module Front Panel type bitmap.
Encoded as two 4 bit nibbles (LSNibble for the lower(B) front panel port, MSNibble for the upper (A) front panel port). Port type encoded as: Not Fitted=0x0, SMA=0x1, BNC=0x2. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.10 |
|
modMonPanelLEDS
A bitmap representation of the module front panel LEDs.
Each LED is a 4 bit nibble, encoded as: Green=0x1, Red=0x3, Red&Flashing=0x7 Nibbles are arranged (LSB->MSB) PWR LED, ALM LED. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.11 |
|
modLabel
Module type label.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.12 |
|
modFreeText
User defined module name.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.13 |
|
modFwDate
Firmware build date
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.1.1.4.1.1.14 |
|
modWaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
|
nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.15 |
|
modWaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
|
x 0.01nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.16 |
|
modTx1MonSuppVoltage
Tx1 Current supply voltage measured in mV. Nominal 12000mV
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.20 |
|
modTx1MonLaserBias
Tx1 Current laser bias current measurement, measured in uA.
|
uAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.21 |
|
modTx1MonLaserPower
Tx1 Current laser power measurement, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.22 |
|
modTx1MonRfPower
Tx1 Current RF power, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.23 |
|
modTx1MonRfGain
Tx1 Current RF gain, measured in 10mdB.
|
x 10mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.24 |
|
modTx1MonFeedI
Tx1 External feed current [0.1mA].
|
x 0.1mAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.25 |
|
modTx1MonFeedV
Tx1 External feed voltage [mV].
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.26 |
|
modTx1MonStatus
Bitmap encoding of the current configuration status of the Tx1 module.
Bit 0: Laser Status (0=Enabled, 1=Disabled) 1: FSK Tone (Digital Channel) Status (0=Enabled, 1=Disabled) 2: Manual Gain Control (MGC) Status (0=Di… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.27 |
|
modTx1MonAlarms
Bitmap encoding of the current alarm status of the Tx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm 1: Minor Alarm 2: Laser Alarm 3: Automatic Gain Control (AGC) Alarm 4: TEC Alarm 5-7: Unus… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.28 |
|
modTx1MonInputPower
Tx1 Input power level, measured in 10mdBm
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.29 |
|
modTx1MonTECTemprtr
Tx1 Laser TEC (Thermo-Electric Cooler) temperature, measured in degrees Centigrade.
|
degCInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.30 |
|
modTx1MonTEC
Tx1 Laser TEC (Thermo-Electric Cooler) current, measured in 0.1mA
|
x 0.1mAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.31 |
|
modTx2MonSuppVoltage
Tx2 Current supply voltage measured in mV.
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.40 |
|
modTx2MonLaserBias
Tx2 Current laser bias current measurement [uA].
|
uAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.41 |
|
modTx2MonLaserPower
Tx2 Current laser power measurement, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.42 |
|
modTx2MonRfPower
Tx2 Current RF power, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.43 |
|
modTx2MonRfGain
Tx2 Current RF gain, measured in 10mdB.
|
x 10mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.44 |
|
modTx2MonFeedI
Tx2 External feed current [0.1mA].
|
0.1mAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.45 |
|
modTx2MonFeedV
Tx2 External feed voltage [mV].
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.46 |
|
modTx2MonStatus
Bitmap encoding of the current configuration status of the Tx2 module.
Bit 0: Laser Status (0=Enabled, 1=Disabled) 1: FSK Tone (Digital Channel) Status (0=Enabled, 1=Disabled) 2: Manual Gain Control (MGC) Status (0=Di… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.47 |
|
modTx2MonAlarms
Bitmap encoding of the current alarm status of the Tx2 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm 1: Minor Alarm 2: Laser Alarm 3: Automatic Gain Control (AGC) Alarm 4: TEC Alarm 5-7: Unus… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.48 |
|
modTx2MonInputPower
Tx2 Input power level, measured in 10mdBm
|
x 10mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.49 |
|
modTx1CfgGainSoftSet
Tx1 Software Gain Control (SGC) Gain setting, measured in 10mdB
|
x 10mdBInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.60 |
|
modTx1CfgAgcTarget
Tx1 Automatic Gain Control target, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.61 |
|
modTx1CfgLaserDisable
Module Tx1 Laser enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.62 |
|
modTx1CfgFskDisable
Module Tx1 FSK Tone (Digital Channel) Enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.63 |
|
modTx1CfgAgc
Module Tx1 Automatic Gain Control enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.64 |
|
modTx1CfgSgc
Module Tx1 Software Gain Control enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.65 |
|
modTx1CfgGpsLoad
Tx1 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.66 |
|
modTx1CfgRFPlevelHigh
Tx1 Rf Power level alarm high threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.67 |
|
modTx1CfgRFPlevelLow
Tx1 Rf Power level alarm low threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.68 |
|
modTx1CfgLnbAlarm
Tx1 LNB voltage alarm severity.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.69 |
|
modTx1CfgTECcontrol
deprecated
Module Tx1 TEC control enable/disable.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.70 |
|
modTx2CfgGainSoftSet
Tx2 Software Gain Control (SGC) Gain setting, measured in 10mdB
|
x 10mdBInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.80 |
|
modTx2CfgAgcTarget
Tx2 Automatic Gain Control (AGC) target, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.81 |
|
modTx2CfgLaserDisable
Module Tx2 Laser enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.82 |
|
modTx2CfgFskDisable
Module Tx2 FSK Tone (Digital Channel) Enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.83 |
|
modTx2CfgAgc
Module Tx2 Automatic Gain Control (AGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.84 |
|
modTx2CfgSgc
Module Tx2 Software Gain Control (SGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.85 |
|
modTx2CfgGpsLoad
Module Tx2 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.86 |
|
modTx2CfgRFPlevelHigh
Tx2 Rf Power level alarm high threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.87 |
|
modTx2CfgRFPlevelLow
Tx2 RF Power level alarm low threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.88 |
|
modTx2CfgLnbAlarm
Module Tx2 LNB voltage alarm severity.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.89 |
|
modTx1InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.100 |
|
modTx1InterBiasSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.101 |
|
modTx1InterPowerSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.102 |
|
modTx1InterPowerCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.103 |
|
modTx1InterGainDef
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.104 |
|
modTx1InterRfMonCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.105 |
|
modTx1InterFskFreqSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.106 |
|
modTx1InterRfGainCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.107 |
|
modTx1InterMonitorMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.108 |
|
modTx1InterAlarmMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.109 |
|
modTx2InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.120 |
|
modTx2InterBiasSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.121 |
|
modTx2InterPowerSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.122 |
|
modTx2InterPowerCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.123 |
|
modTx2InterGainDef
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.124 |
|
modTx2InterRfMonCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.125 |
|
modTx2InterFskFreqSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.126 |
|
modTx2InterRfGainCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.127 |
|
modTx2InterMonitorMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.128 |
|
modRx1MonSuppVoltage
Rx1 Current supply voltage measured in mV.
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.140 |
|
modRx1MonRLLBias
Module Rx1 Photodiode received light level [0.01dBm].
|
x 0.01dBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.141 |
|
modRx1MonRfPower
Module Rx1 current RF power [mdBm].
|
mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.142 |
|
modRx1MonRfGain
Module Rx1 current RF gain [mdB].
|
mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.143 |
|
modRx1MonStatus
Bitmap encoding of the current configuration status of the Rx1 module.
Bit 0: FSK (Digital Channel) Detection Status (0=Not Detected, 1=Detected) 1: FSK (Digital Channel) Detection (0=Enabled, 1=Disabled) 2: Manual Ga… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.144 |
|
modRx1MonAlarms
Bitmap encoding of the current alarm status of the Rx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm 1: Minor Alarm 2: Automatic Gain Control (AGC) Alarm 3-7: Unused Bit 8: Suppl… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.145 |
|
modRx1MonOutputPower
Rx1 Current output RF power level, measured in 10mdBm
|
10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.146 |
|
modRx2MonSuppVoltage
Rx2 Current supply voltage measured value [mV].
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.160 |
|
modRx2MonRLLBias
Rx2 Photodiode received light level [0.01dBm].
|
x 0.01dBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.161 |
|
modRx2MonRfPower
Rx2 Current RF power [mdBm].
|
mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.162 |
|
modRx2MonRfGain
Rx2 Current RF gain [mdB].
|
mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.163 |
|
modRx2MonStatus
Bitmap encoding of the current configuration status of the Rx1 module.
Bit 0: FSK (Digital Channel) Detection Status (0=Not Detected, 1=Detected) 1: FSK (Digital Channel) Detection (0=Enabled, 1=Disabled) 2: Manual Ga… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.164 |
|
modRx2MonAlarms
Bitmap encoding of the current alarm status of the Rx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm 1: Minor Alarm 2: Automatic Gain Control (AGC) Alarm 3-7: Unused Bit 8: Suppl… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.165 |
|
modRx2MonOutputPower
Rx2 Current output RF power level, measured in 10mdBm
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.166 |
|
modRx1CfgGainSoftSet
Rx1 Software Gain Control (SGC) setting measured in 10mdB.
|
x 10mdBInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.180 |
|
modRx1CfgAgcTarget
Rx1 Automatic Gain Control target, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.181 |
|
modRx1CfgFskDisable
Rx1 Digital Channel Frequency Shift Keying (FSK) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.182 |
|
modRx1CfgAgc
Rx1 Automatic Gain Control (AGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.183 |
|
modRx1CfgSgc
Rx1 Software Gain Control (SGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.184 |
|
modRx1CfgAgcMode
Rx1 Automatic Gain Control (AGC) mode select.
If in AGC RF Level mode, the AGC control loop will adjust the RF gain to maintain a constant RF power output If in AGC RLL (Received Light Level) mode, the receiver will att… |
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.185 |
|
modRx1CfgGpsLoad
Rx1 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.186 |
|
modRx1CfgRFPlevelHigh
Rx1 RF Power level alarm high threshold, measured in 10mdBm
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.187 |
|
modRx1CfgRFPlevelLow
Rx1 RF Power level alarm low threshold, measured in 10mdBm
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.188 |
|
modRx2CfgGainSoftSet
Rx2 Software Gain Control (SGC) level measured in 10mdB.
|
x 10mdBInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.200 |
|
modRx2CfgAgcTarget
Rx2 Automatic Gain Control (AGC) target, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.201 |
|
modRx2CfgFskDisable
Rx2 Digital Channel Frequency Shift Keying (FSK) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.202 |
|
modRx2CfgAgc
Rx2 Automatic Gain Control (AGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.203 |
|
modRx2CfgSgc
Rx2 Software Gain Control (SGC) enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.204 |
|
modRx2CfgAgcMode
Rx2 Automatic Gain Control (AGC) mode select.
If in AGC RF Level mode, the AGC control loop will adjust the RF gain to maintain a constant RF power output If in AGC RLL (Received Light Level) mode, the receiver will att… |
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.205 |
|
modRx2CfgGpsLoad
Rx2 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.206 |
|
modRx2CfgRFPlevelHigh
Rx2 RF Power level alarm high threshold, measured in 10mdBm
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.207 |
|
modRx2CfgRFPlevelLow
Rx2 RF Power level alarm low threshold, measured in 10mdBm
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.208 |
|
modRx1InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.220 |
|
modRx1InterBiasSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.221 |
|
modRx1InterGainDef
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.222 |
|
modRx1InterRfMonCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.223 |
|
modRx1InterFskFreqSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.224 |
|
modRx1InterFskSlicSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.225 |
|
modRx1InterRfGainCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.226 |
|
modRx1InterMonitorMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.227 |
|
modRx1InterAlarmMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.228 |
|
modRx2InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.240 |
|
modRx2InterBiasSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.241 |
|
modRx2InterGainDef
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.242 |
|
modRx2InterRfMonCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.243 |
|
modRx2InterFskFreqSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.244 |
|
modRx2InterFskSlicSet
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.245 |
|
modRx2InterRfGainCal
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.246 |
|
modRx2InterMonitorMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.247 |
|
modRx2InterAlarmMask
Internal system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.248 |
|
modAmpMonVcc
Amplifier supply voltage, measured in mV.
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.260 |
|
modAmpMonTemp
Amplifier temperature, measured in degrees Celsius
|
degCInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.261 |
|
modAmp1MonRf
Amplifier 1 Current RF level, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.262 |
|
modAmp1MonRfGain
Amplifier 1 RF gain, measured in 10mdB.
|
x 10mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.263 |
|
modAmp1MonStatus
Bitmap encoding of the current configuration status of the Amplifier card:
Bit 0: Amplifier 2 Automatic Gain Control (AGC) Status (0=Disabled, 1=Enabled) 1: Amplifier 1 Automatic Gain Control (AGC) Status (0=Disabled, … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.264 |
|
modAmp1MonAlarms
Bitmap encoding of the current alarm status of the amplifier card: (All alarms encoded as 0=NoAlarm, 1=Alarm)
Bit 0: Amplifier 2 RF Gain Alarm 1: Amplifier 2 RF Level Alarm 2: Temperature Alarm 3: Amplifier 1 RF Gain… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.265 |
|
modAmp2MonRf
Amplifier 2 Current RF level, measured in 10mdBm.
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.280 |
|
modAmp2MonRfGain
Amplifier 2 RF gain, measured in 10mdBm.
|
x 10mdBInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.281 |
|
modAmp2MonStatus
Bitmap encoding of the current configuration status of the Amplifier card:
Bit 0: Amplifier 1 Automatic Gain Control (AGC) Status (0=Disabled, 1=Enabled) 1: Amplifier 2 Automatic Gain Control (AGC) Status (0=Disabled, … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.282 |
|
modAmp2MonAlarms
Bitmap encoding of the current alarm status of the amplifier card: (All alarms encoded as 0=NoAlarm, 1=Alarm)
Bit 0: Amplifier 2 RF Gain Alarm 1: Amplifier 2 RF Level Alarm 2: Temperature Alarm 3: Amplifier 1 RF Gain… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.283 |
|
modAmp1CfgGainSoftSet
Amp 1 Software Gain Control (SGC) gain setting, measured in 10mdB
|
x 10mdBInteger32r/w | .1.3.6.1.4.1.31225.1.1.4.1.1.300 |
|
modAmp1CfgAgcTarget
Amp 1 Automatic Gain Control (AGC) target, measured in 10mdBm.
|
x 10mdBmInteger32r/w | .1.3.6.1.4.1.31225.1.1.4.1.1.301 |
|
modAmp1InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.302 |
|
modAmp1InterGainCal
Amp 1 Gain calibration.
|
Integer32 | .1.3.6.1.4.1.31225.1.1.4.1.1.303 |
|
modAmp1InterRfMonCal
Amp 1 RF level monitor calibration.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.304 |
|
modAmp1InterAgcCtrl
Amp 1 Automatic Gain Control setting.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.305 |
|
modAmp2CfgGainSoftSet
Amp 1 Software Gain Control (SGC) gain setting, measured in 10mdB
|
x 10mdBInteger32r/w | .1.3.6.1.4.1.31225.1.1.4.1.1.320 |
|
modAmp2CfgAgcTarget
Amp 2 Automatic Gain Control (AGC) target, measured in 10mdBm.
|
x 10mdBmInteger32r/w | .1.3.6.1.4.1.31225.1.1.4.1.1.321 |
|
modAmp2InterRange
Internal system information.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.322 |
|
modAmp2InterGainCal
Amp 2 Gain calibration.
|
Integer32 | .1.3.6.1.4.1.31225.1.1.4.1.1.323 |
|
modAmp2InterRfMonCal
Amp 2 RF level monitor calibration.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.324 |
|
modAmp2InterAgcCtrl
Amp 2 Automatic Gain Control enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.325 |
|
modAmp1LvlLimitHCtrl
Amp 1 RF Level high alarm threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.330 |
|
modAmp1LvlLimitLCtrl
Amp 1 RF Level low alarm threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.331 |
|
modAmp2LvlLimitHCtrl
Amp 2 RF Level high alarm threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.332 |
|
modAmp2LvlLimitLCtrl
Amp 2 RF Level low alarm threshold, measured in 10mdBm.
|
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.333 |
|
modAmpGainAlThCtrl
Amplifier Gain warning threshold, measured in 10mdB.
This threshold is measured from the alarm thresholds (typically a low threshold of 15dB, and a high threshold of 30dB), i.e, if the Alarm threshold is 10dB, and this … |
x 10mdBInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.334 |
|
modAmpLvlAlThCtrl
Amplifier RF Level warning threshold, measured in 10mdBm.
This threshold is measured from the alarm threshold, i.e, if the Alarm threshold is 10dBm, and this warning threshold is set at 2dBm, the warning shall be trigge… |
x 10mdBmInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.335 |
|
modSwtchMonModeSetting
Switch mode status.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.350 |
|
modSwtchMonStatus
Bitmap encoding of the current switch status.
Bit 0-3: Unused 4: Switch Direction (1=Left, 0=Right) 5-11: Unused 12-13: Front Panel ALM LED status (00=off, 01=Green, 11=Red) 14-15: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.351 |
|
modSWAlarmBitMap
Bitmap encoding of the current switch alarm status.
Bit 0-1: Unused 2: Minor Alarm 3: Major Alarm 4-15: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.352 |
|
modSwtchModeSetting
Switch mode control
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.355 |
|
modLNBAlarmMask
LNB masking for invalid alarms. Bit 0 = major, Bit 8= OLF
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.360 |
|
modLNBbitAUX
LNB Auxillary Mode setting: ON = Set Vout to +22V nominal.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.361 |
|
modLNBbitITEST
LNB Current threshold setting. Options are Low (6mA) or High (12mA)
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.362 |
|
modLNBbitEN
LNB Module Power block enable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.363 |
|
modLNBbitVSEL
LNB Module Output voltage select. Options are High (18V nominal), or Low (13V Nominal).
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.364 |
|
modLNBbitLLC
LNB Cable compensation setting. If enabled, the output voltage is boosted by an additional +1V.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.365 |
|
modLNBbitTEN
LNB 22kHz tone enable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.366 |
|
modLNBbitTTX
LNB 22kHz tone output switch.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.367 |
|
modLNBbitPCL
LNB Current limit mode selector.
Static mode uses a simple clamp current limit. Active mode uses a pulsed current limit |
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.368 |
|
modLNBbitOLF
LNB Overload flag.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.369 |
|
modLNBbitOTF
LNB Over Temperature flag.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.370 |
|
modLNBMonStatus
Bitmap of the current status of the LNB module
Bit 0: Power Block Enable (0=Disabled, 1=Enabled) 1: Output Voltage Setting (0=Low(13V), 1=High(18V)) 2: Cable Compensation setting (0=None, 1=Boost(additional 1V)) 3: T… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.371 |
|
modLNBDIPSwitch
Bitmap of the DIP switch settings on the LNB Module. All bits are encoded as 0=disabled, 1=enabled
Bit 0: Power Block Enable 1: High Voltage output 2: Tone 3: Cable Compensation 4: Aux Mode 5-7: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.372 |
|
modLNBAlarmStatus
Bitmap of the LNB alarm status. All bits are encoded as 0=noAlarm, 1= Alarm.
Bit 0: Overload Alarm 1: Over Temperature Alarm 2-7: Unused 8: Major Alarm 9: Minor Alarm 10-15: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.373 |
|
modETHMonSupplyVolt
Ethernet module supply voltage, measured in mV
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.380 |
|
modETHMonLinkdataRate
Ethernet module Fibre Link data rate bitmap. All bits are encoded as 0=noLink, 1=Link).
Bit 0-4: Unused 5: Valid 100BASE Link 6: Valid 1000BASE Link 7: Valid Link (any speed) |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.381 |
|
modETHMonDataActivity
Ethernet data activity bitmap.
Bit 0-2: Unused 3: Activity (0=noActivity, 1=Activity) 4-7: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.382 |
|
modETHMonAlarms
Ethernet module alarms bitmap. All bits are encoded as 0=noAlarm, 1=Alarm
Bit 0-1: Unused 2: Minor Alarm 3: Major Alarm 4-7: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.383 |
|
modETHMonCopperdataRate
Ethernet module Copper Link data rate bitmap. All bits are encoded as 0=noLink, 1=Link).
Bit 0-3: Unused 4: Valid 10BASE link 5: Valid 100BASE Link 6: Valid 1000BASE Link 7: Valid Link (any speed) |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.384 |
|
modETHMonCopperActivity
Ethernet module Copper Link activity bitmap.
Bit 0: Unused 1: Duplex (0=Half Duplex, 1=Full Duplex) 2: Collision (0=noCollision, 1=Collision Detected) 3: Activity (0=noActivity, 1=Activity) 4-7: Unused |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.385 |
|
modSERMonLinkdataRate
Serial data module link data rate.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.390 |
|
modSERMonDataActivity
Serial data module data activity.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.391 |
|
modSERMonSerialAlarm
Serial data alarm bitmap. All bits are encoded as 0=noAlarm, 1=Alarm.
Bit 0: Vcc Alarm 1: Laser Power Alarm 2: RLL (Received Light Level) Alarm 3: Temperature Alarm 4-7: Unused 8: Major Alarm 9: Mi… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.392 |
|
modSERMonChannel1Type
Serial data - Channel 1 type.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.393 |
|
modSERMonChannel2
Serial data - Channel 2 type.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.394 |
|
modSERMonSupplyVolt
Serial data - Supply voltage.
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.395 |
|
modSERMonLaserPower
Serial Digital Module Laser optical power [10mdBm].
|
x 10mdBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.396 |
|
modSERMonRLLLevel
Serial Digital Module RLL level [10mdBm].
|
x 10mDBmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.397 |
|
modSERMonDipManualMode
Serial Digital Module Manual Mode DIP switch status.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.398 |
|
modSERCfgChannelRate
Serial Digital Module channel data rate setting.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.420 |
|
modSERCfgTTlImpedance
Serial Digital Module TTL Impedance setting.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.421 |
|
modSERCfgLaserDisable
Serial Digital Module Laser enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.422 |
|
modPROCDescription
PROC module description.
|
OctetString | .1.3.6.1.4.1.31225.1.1.4.1.1.423 |
|
modMaintenanceMode
Module Maintenance Mode.
When in maintenance mode, a module will not produce events/traps and will not contribute to the summary alarm outputs. Other module OIDs will be updated as normal. |
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.430 |
|
modG6CardMonSupplyVolt
Card supply voltage, measured in mV.
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.440 |
|
modG6Dev1CfgBiasTSrc
Set bias-t source.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.452 |
|
modG6Dev1MonFeedI
External feed current [0.01mA].
|
x 0.01mAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.454 |
|
modG6Dev1MonFeedV
External feed voltage [mV].
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.455 |
|
modG6Dev1Type
RF device 1 type.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.456 |
|
modG6Dev1WaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
|
nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.457 |
|
modG6Dev1WaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
|
x 0.01nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.458 |
|
modG6Dev1CfgAFDThr
Antenna fault detection low current threshold
|
x 0.01mAInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.464 |
|
modG6Dev1CfgAFDEn
Antenna fault detection enable
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.465 |
|
modG6Dev1CfgAGCMode
Enable automatic gain control based on received light level (RLL)
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.466 |
|
modG6Dev2CfgBiasTSrc
Set bias-t source.
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.472 |
|
modG6Dev2MonFeedI
External feed current [0.01mA].
|
x 0.01mAInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.474 |
|
modG6Dev2MonFeedV
External feed voltage [mV].
|
mVInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.475 |
|
modG6Dev2Type
RF device 2 type.
|
Enumeration | .1.3.6.1.4.1.31225.1.1.4.1.1.476 |
|
modG6Dev2WaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
|
nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.477 |
|
modG6Dev2WaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
|
x 0.01nmInteger32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.478 |
|
modG6Dev2CfgAFDThr
Antenna fault detection low current threshold
|
x 0.01mAInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.1.1.4.1.1.484 |
|
modG6Dev2CfgAFDEn
Antenna fault detection enable
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.485 |
|
modG6Dev2CfgAGCMode
Enable automatic gain control based on received light level (RLL)
|
Enumerationr/w | .1.3.6.1.4.1.31225.1.1.4.1.1.486 |
trapsTable
table.1.3.6.1.4.1.31225.5.3
·
1 row entry
·
9 columns
A table that contains the last trapsTableMaximumSize traps.
A trap entry to the trap table
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
trapsSequenceID
Sequence number of the trap in the last traps table.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.31225.5.3.1.1 |
|
trapsTick
Timetick when the current trap was sent.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.31225.5.3.1.2 |
|
trapsDate
System date when the current trap was sent.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.5.3.1.3 |
|
trapsTime
System time when the current trap was sent.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.31225.5.3.1.4 |
|
trapsSeverity
The severity of the trap instance.
|
Enumeration | .1.3.6.1.4.1.31225.5.3.1.5 |
|
trapsSpecificType
The specific type of trap instance.
|
Enumeration | .1.3.6.1.4.1.31225.5.3.1.6 |
|
trapsModuleType
Additional data sent with the trap. This is the module type that generated the trap.
|
Enumeration | .1.3.6.1.4.1.31225.5.3.1.7 |
|
trapsSlotIndex
Additional data sent with the trap. The module which generated the trap was in this slot in the ViaLiteHD chassis.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.31225.5.3.1.8 |
|
trapsSpecificCard
This define if the upper or lower card generated the trap.
|
Enumeration | .1.3.6.1.4.1.31225.5.3.1.9 |