PDN-SPECTRUMMGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
25

spectrumMgmtTable

table deprecated
.1.3.6.1.4.1.1795.2.24.2.6.19.1.3 · 1 row entry · 6 columns
Open in standard view 
The Spectrum Management Table.
spectrumMgmtEntry entry .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1
An entry in the Spectrum Management table.
Indexes
IF-MIBifIndex
Column Syntax OID
spectrumMgmtEWL deprecated
The Estimated Working Length [EWL(ft)]. The value
selected is the estimated length of the line in ft.
See the Deployment guideline Table below.
This value is usually specified by the carrier. This
value is only requi…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.1
spectrumMgmtAllowedSpeedsMin1 deprecated
This rate will be the Minimum Line Bit Rate based
on the Line Length selected.
See the Deployment guideline Table above.
Example: EWL=12.5 this value may be 808kbps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.2
spectrumMgmtAllowedSpeedsMax1 deprecated
This rate will be the Maximum Line Bit Rate based
on the Line Length selected
See the Deployment guideline Table above.
Example: EWL=12.5 this value may be 832kbps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.3
spectrumMgmtAllowedSpeedsMin2 deprecated
This rate will be the Minimum Line Bit Rate based
on the Line Length selected.
See the Deployment guideline Table above.
Example: EWL=12.5 this value may be 960kbps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.4
spectrumMgmtAllowedSpeedsMax2 deprecated
This rate will be the Maximum Line Bit Rate based
on the Line Length selected.
See the Deployment guideline Table above.
Example: EWL=12.5 this value may be 1000kbps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.5
spectrumMgmtLineLength deprecated
This 'Line Length' feature is only required if the
SpectrumMgmt is Enabled and the spectrumMgmtCountryCode
selected is 'UK'.
'Short' Line Length from the exchange can support speeds
up to 2056 Kbps.
'Medium' Line Length…
Enumerationr/w
Enumerated Values:
1short
2medium
3long
 .1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.6

newSpectrumMgmtGeneralConfigTable

table
.1.3.6.1.4.1.1795.2.24.2.6.19.2.1 · 1 row entry · 4 columns
Open in standard view 
General Configuration of the spectrum management.
This table contains an entry for each technology
managed by this device.
newSpectrumMgmtGeneralConfigEntry entry .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1
An entry with the general spectrum mgmt configuration
parameters for a specific DSL technology.
Indexes
ENTITY-MIBentPhysicalIndex IF-MIBifType
Column Syntax OID
newSpectrumMgmtSelection
This object is used to Enable or Disable
Spectrum Management on DSL interfaces
managed by this device. Enabling this object
limits the DSL speeds on each port based on
line length in order to meet ANSI T1.417
Spectrum…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.1
newSpectrumMgmtMode
This object restricts the MAX-ACCESS of the 'Selection'
object.
Following are the details of each of the values:

enableOnly(1) - Indicates that the 'Selection' object
IS always '…
Enumeration
Enumerated Values:
1enableOnly
2disableOnly
3both
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.2
newSpectrumMgmtLoopMeasurementMethod
This object indicates the measurement method used in
describing the Loop Length of a circuit. Following are the
details of each of the options:

none(1) - Indicates that the Spectral Compliance
…
Enumeration
Enumerated Values:
1none
2loopLength
3ewl
4quadMode
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.3
newSpectrumMgmtEWLUnits
This object indicates the units of measurement used in
describing the Estimated Working Length of a circuit.
Following are the details of each of the units:

none(1) - Indicates that the Spectral C…
Enumeration
Enumerated Values:
1none
2feet
3meters
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.4

newSpectrumMgmtConfTable

table
.1.3.6.1.4.1.1795.2.24.2.6.19.2.2 · 1 row entry · 3 columns
Open in standard view 
The new Spectrum Management Configuration Table
This table is used for configuring spectrum management
objects on any DSL interface.
newSpectrumMgmtConfEntry entry .1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1
An entry in the xDSL Spectrum Management
Configuration table.

Note: This entry can be accessed only for ifIndex
values that belong to a physical interface.
e.g. for ifType = 'shdsl' (IANAifTy…
Indexes
IF-MIBifIndex
Column Syntax OID
newSpectrumMgmtConfEWL
The Equivalent Working Length (EWL). The value selected
corresponds to the estimated length of the line in

feet - if 'EWLUnits' object is 'feet'.
meters - if 'EWLUnits' object is 'meters'.
…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.1
newSpectrumMgmtConfLoopLength
This entry specifies the loop length for the line. The
configurable values are short(1), medium(2) and long(3).
The 'Loop Length' feature can be used only if the
'shdslSpectrumMgmtSelection' object is Enabled and
the '…
Enumerationr/w
Enumerated Values:
1short
2medium
3long
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.2
newSpectrumMgmtConfQuadMode
This entry specifies the quad cable configuration &
length for the line. The configurable values are
sameQuad(1), segregatedQuadUpto3km(2) and
segregatedQuadAbove3km(3). The 'Quad Mode' feature can be
used only if t…
Enumerationr/w
Enumerated Values:
1sameQuad
2segregatedQuadUpto3km
3segregatedQuadAbove3km
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.3

newSpectrumMgmtLineInfoTable

table
.1.3.6.1.4.1.1795.2.24.2.6.19.2.3 · 1 row entry · 12 columns
Open in standard view 
The Spectrum Management Line Info Table.
This table gives information about the spectrum 
management ranges that are applicable for each port,
based on the spectral requirements for the device.
newSpectrumMgmtLineInfoEntry entry .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1
An entry in the newSpectrumMgmtLineInfoTable table.

Note: This entry can be accessed only for ifIndex values
that belong to a physical interface.
e.g. for ifType = 'adsl'.
Indexes
IF-MIBifIndex
Column Syntax OID
newSpectrumMgmtXtucMax1TxRate
This rate will be the max allowed Tx Rate(in bps) for
the port based on the Spectrum Management requirements for
XTUC in a particular spectral compliance configuration.

Some measurement methods may hav…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.1
newSpectrumMgmtXtucMin1TxRate
This rate will be the min allowed Tx Rate based on the
spectrum management requirements for the XTUC. The
MinTxRate will be upper bounded by
'newSpectrumMgmtXtucMax1TxRate' object.

Some measurement met…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.2
newSpectrumMgmtXtucMax2TxRate
This rate will be the max allowed Tx Rate(in bps) for
the port based on the Spectrum Management requirements for
XTUC in a particular spectral compliance configuration.
This object is the

Some measur…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.3
newSpectrumMgmtXtucMin2TxRate
This rate will be the min allowed Tx Rate based on the
spectrum management requirements for the XTUC. The
MinTxRate will be upper bounded by
'newSpectrumMgmtXtucMax1TxRate' object.

Some measurement met…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.4
newSpectrumMgmtXtucMaxTxPower
The maximum transmit power at the ATUC (in tenth dB).
This value will be based on the spectrum management
selection.
tenth dBInteger32
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.5
newSpectrumMgmtXturMax1TxRate
This rate will be the max allowed Tx Rate(in bps) for
the port based on the Spectrum Management requirements for
XTUR in a particular spectral compliance configuration.
This object is the

Some measur…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.6
newSpectrumMgmtXturMin1TxRate
This rate will be the min allowed Tx Rate based on the
spectrum management requirements for the XTUR. The
MinTxRate will be upper bounded by
'newSpectrumMgmtXturMax1TxRate' object.

Some measurement met…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.7
newSpectrumMgmtXturMax2TxRate
This rate will be the max allowed Tx Rate(in bps) for
the port based on the Spectrum Management requirements for
XTUR in a particular spectral compliance configuration.

Some measurement methods may hav…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.8
newSpectrumMgmtXturMin2TxRate
This rate will be the min allowed Tx Rate based on the
spectrum management requirements for the XTUR. The
MinTxRate will be upper bounded by
'newSpectrumMgmtXtucMax1TxRate' object.

Some measurement met…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.9
newSpectrumMgmtXturMaxTxPower
The maximum transmit power at the ATUR (in tenth dB). This
value will be based on the spectrum management selection.
tenth dBInteger32
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.10
newSpectrumMgmtMinEWL
The minimum value (in feet, if 'EWLUnits' is 'feet, or in
meters, if 'EWLUnits' is 'meters') that the 'ConfEWL'
object can accept. Together with the 'MaxEWL' object,
this object indicates the range of EWL when 'EWLUnits…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.11
newSpectrumMgmtMaxEWL
The maximum value (in feet, if 'EWLUnits' is 'feet, or in
meters, if 'EWLUnits' is 'meters') that the 'ConfEWL'
object can accept. Together with the 'MinEWL' object,
this object indicates the range of EWL when 'EWLUnits…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.12