PDN-MPE-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
29

mpeSysDevIpFilterConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.12.23.1.1.1 · 1 row entry · 8 columns
Open in standard view 
This table allows the user to configure filtering information.
Every filter is comprised of a number of rules(see SysDevRuleTable).
When a filter is bound to an interface, all the rules of that particular
filter apply to that particular interface. Also the same filter
maybe bound to several interfaces. This table only allows
us to configure information about a particular filter.
this table is indexed by entPhysicalIndex and sysDevIpFilterName.
mpeSysDevIpFilterConfigTableEntry entry .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1
Describes a specific entry of the filter configuration table.
Indexes
ENTITY-MIBentPhysicalIndex mpeSysDevIpFilterName
Column Syntax OID
mpeSysDevIpFilterName mandatory
The value of this object corresponds directly to the name
of the filter.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.1
mpeSysDevIpDefFilterAction mandatory
The value of this object corresponds to the default action
taken on a particular IP packet based on the filter rule.
forward - the packet is forwarded
discard - the packet is discarded.
delete - the rule of a parti…
Enumerationr/w
Enumerated Values:
1forward
2discard
3delete
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.2
mpeSysDevIpFilterNumOfDynamicRules mandatory
This object corresponds to the number of dynamic rules
configured for this filter
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.3
mpeSysDevIpFilterNumOfStaticRules mandatory
This object corresponds to the number of static rules
configured for this filter
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.4
mpeSysDevIpFilterRefCount mandatory
This object corresponds to the number of
references for this filter by the various
interfaces of the system
For Example if filter 'abc' is bound to
two of the DSL interfaces as input filters. then
the reference count …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.5
mpeSysDevIpFilterTcpAckFilterAction mandatory
The value of this object corresponds to the default action
taken on the first TCP ACK packet of the TCP connection. This
object is not supported for MCC.
Enumerationr/w
Enumerated Values:
1forward
2discard
3noOp
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.6
mpeSysDevIpFilterDhcpFilterAction mandatory
The value of this object corresponds to the default action
taken on the DHCP transaction messages. This object is not supported
for mcc.
Enumerationr/w
Enumerated Values:
1forward
2discard
3noOp
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.7
mpeSysDevIpFilterRowStatus mandatory
The object is used to add or delete a row from
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.1.1.8

mpeSysDevIpFilterRuleConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.12.23.1.1.2 · 1 row entry · 19 columns
Open in standard view 
This table allows the user to configure the rules of each IP filter.
When a filter is bound to an interface, all the rules of that particular 
filter apply to that particular interface. Also, the same filter may be
found to several interfaces. This table is indexed by entPhysicalIndex,
sysDevIpFilterName and sysDevIpFilterRuleNumber.
mpeSysDevIpFilterRuleConfigTableEntry entry .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1
Describes a specific entry of the filter rule configuration table.
Indexes
ENTITY-MIBentPhysicalIndex mpeSysDevIpRuleFilterName mpeSysDevIpFilterRuleNumber
Column Syntax OID
mpeSysDevIpRuleFilterName mandatory
The value of this object corresponds directly to the name
of the filter.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.1
mpeSysDevIpFilterRuleNumber mandatory
The value of this object corresponds directly to a rule
within a particular filter. If the value of this object
is 0, then the sets apply to the filter as a whole. For
example one may want to delete the whole filter. f…
Integer32
Constraints:
range: 1-33
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2
mpeSysDevIpFilterRuleSrcAddress mandatory
The value of this object corresponds directly to an source
IP Address. This object could be set if IP packets need to be
filtered based on where it is coming from. Setting this object
to 0.0.0.0 disables source IP addre…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.3
mpeSysDevIpFilterRuleSrcAddrMask mandatory
The value of this object corresponds directly to an source
IP Address Mask. The value of this object is bitwise anded
with the source address within the IP packet and then compared
with the mpeSysDevIPFilterSrcAddress.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4
mpeSysDevIpFilterRuleSrcAddrCompEnable mandatory
This object enables or disables the source address comparison.
It is not supported for MCC.
Enumerationr/w
Enumerated Values:
1enable
2disable
3noOp
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.5
mpeSysDevIpFilterRuleSrcPortNum mandatory
The UDP or TCP port number of the source on which this filter
is applied.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.6
mpeSysDevIpFilterRuleMaxSrcPortNum mandatory
The maximum UDP or TCP port number of the source on which
this filter is applied. This object is valid only if the source
comparison type is in-range or out-range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.7
mpeSysDevIpFilterRuleSrcCompType mandatory
The value of this object corresponds to the type of
comparison which is to be made for source based filtering
for the particular rule of the filter.
none - no comparison is to be made.
eq - equal to
neq - not equ…
Enumerationr/w
Enumerated Values:
1none
2eq
3neq
4gt
5lt
6inRange
7outRange
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.8
mpeSysDevIpFilterRuleDestAddress mandatory
The value of this object corresponds directly to an destination
IP Address. This object could be set if IP packets need to be
filtered based on where it is going to.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.9
mpeSysDevIpFilterRuleDestAddrMask mandatory
The value of this object corresponds directly to an destination
IP Address Mask. The value of this object is bitwise anded
with the destination address within the IP packet and then compared
with the mpeSysDevIPFilterRu…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.10
mpeSysDevIpFilterRuleDestAddrCompEnable mandatory
This object enables or disables the destination address comparison.
It is not supported for MCC.
Enumerationr/w
Enumerated Values:
1enable
2disable
3noOp
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.11
mpeSysDevIpFilterRuleDestPortNum mandatory
The UDP or TCP port number of the destination on which this filter
is applied
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.12
mpeSysDevIpFilterRuleMaxDestPortNum mandatory
The maximum UDP or TCP port number of the destination on which
this filter is applied. This object is valid only if the destination
comparison type is in-range or out-range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.13
mpeSysDevIpFilterRuleDestCompType mandatory
The value of this object corresponds to the type of
comparison which is to be made for destination based filtering
for the particular rule of the filter.
none - no comparison is to be made.
eq - equal to
neq - no…
Enumerationr/w
Enumerated Values:
1none
2eq
3neq
4gt
5lt
6inRange
7outRange
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.14
mpeSysDevIpFilterRuleType mandatory
The value of this object corresponds to the type of
type of rule configured
static - This indicates that the rule was configured
by an NMS either by SNMP, console or using
telnet
dy…
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.15
mpeSysDevIpFilterRuleProtocolTypeUdp mandatory
The value of this object corresponds to the action
taken on a particular UDP packet based on the source/
destination port comparison rule.
Enumerationr/w
Enumerated Values:
1forward
2discard
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.16
mpeSysDevIpFilterRuleProtocolTypeTcp mandatory
The value of this object corresponds to the action
taken on a particular TCP packet bases on the source/
destination port comparison rule.
Enumerationr/w
Enumerated Values:
1forward
2discard
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.17
mpeSysDevIpFilterRuleProtocolTypeIcmp mandatory
The value of this object corresponds to the action
taken on a particular ICMP packet bases on the protocol
type comparison rule.
Enumerationr/w
Enumerated Values:
1forward
2discard
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.18
mpeSysDevIpFilterRuleRowStatus mandatory
The object is used to add or delete a row from
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.19

mpeSysDevMaxNumOfIpFiltersTable

table mandatory
.1.3.6.1.4.1.1795.2.24.12.23.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the maximum number of IP filters
supported on a device. It is indexed by entPhysicalIndex.
mpeSysDevMaxNumOfIpFiltersTableEntry entry .1.3.6.1.4.1.1795.2.24.12.23.1.1.3.1
Describes a specific entry of the max number of filters table.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
mpeSysDevMaxNumOfInputIpFilters mandatory
The value of this object corresponds directly to the max
number of input IP filters supported by each device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.3.1.1
mpeSysDevMaxNumOfOutputIpFilters mandatory
The value of this object corresponds directly to the max
number of Output IP filters supported by each device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.23.1.1.3.1.2