mpeSysDevIpFilterRuleNumber

PDN-MPE-FILTER-MIB · .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2
MIB view Table view

Object

column mandatory Integer32 
The value of this object corresponds directly to a rule 
within a particular filter. If the value of this object
is 0, then the sets apply to the filter as a whole. For
example one may want to delete the whole filter. for
a get only the name of the filter is returned.

Context

MIB
PDN-MPE-FILTER-MIB
OID
.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2
Type
column
Access
readonly
Status
mandatory
Parent
mpeSysDevIpFilterRuleConfigTableEntry
Table
mpeSysDevIpFilterRuleConfigTable
Siblings
18

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-33

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mpeSysDevIpRuleFilterName mandatory
The value of this object corresponds directly to the name of the filter.
columnOctetString.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.1
mpeSysDevIpFilterRuleDestAddrMask mandatory
The value of this object corresponds directly to an destination IP Address Mask. The value of this object is bitwise anded with the destination address within the IP packet and th…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.10
mpeSysDevIpFilterRuleDestAddrCompEnable mandatory
This object enables or disables the destination address comparison. It is not supported for MCC.
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.11
mpeSysDevIpFilterRuleDestPortNum mandatory
The UDP or TCP port number of the destination on which this filter is applied
columnInteger32.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.12
mpeSysDevIpFilterRuleMaxDestPortNum mandatory
The maximum UDP or TCP port number of the destination on which this filter is applied. This object is valid only if the destination comparison type is in-range or out-range
columnInteger32.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.13
mpeSysDevIpFilterRuleDestCompType mandatory
The value of this object corresponds to the type of comparison which is to be made for destination based filtering for the particular rule of the filter. none - no comparison i…
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.14
mpeSysDevIpFilterRuleType mandatory
The value of this object corresponds to the type of type of rule configured static - This indicates that the rule was configured by an NMS either by SNMP, conso…
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.15
mpeSysDevIpFilterRuleProtocolTypeUdp mandatory
The value of this object corresponds to the action taken on a particular UDP packet based on the source/ destination port comparison rule.
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.16
mpeSysDevIpFilterRuleProtocolTypeTcp mandatory
The value of this object corresponds to the action taken on a particular TCP packet bases on the source/ destination port comparison rule.
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.17
mpeSysDevIpFilterRuleProtocolTypeIcmp mandatory
The value of this object corresponds to the action taken on a particular ICMP packet bases on the protocol type comparison rule.
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.18
mpeSysDevIpFilterRuleRowStatus mandatory
The object is used to add or delete a row from this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.19
mpeSysDevIpFilterRuleSrcAddress mandatory
The value of this object corresponds directly to an source IP Address. This object could be set if IP packets need to be filtered based on where it is coming from. Setting this ob…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.3
mpeSysDevIpFilterRuleSrcAddrMask mandatory
The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the source address within the IP packet and then compare…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4
mpeSysDevIpFilterRuleSrcAddrCompEnable mandatory
This object enables or disables the source address comparison. It is not supported for MCC.
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.5
mpeSysDevIpFilterRuleSrcPortNum mandatory
The UDP or TCP port number of the source on which this filter is applied.
columnInteger32.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.6
mpeSysDevIpFilterRuleMaxSrcPortNum mandatory
The maximum UDP or TCP port number of the source on which this filter is applied. This object is valid only if the source comparison type is in-range or out-range
columnInteger32.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.7
mpeSysDevIpFilterRuleSrcCompType mandatory
The value of this object corresponds to the type of comparison which is to be made for source based filtering for the particular rule of the filter. none - no comparison is to …
columnEnumeration.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.8
mpeSysDevIpFilterRuleDestAddress mandatory
The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be filtered based on where it is going to.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.9