mpeSysDevIpFilterRuleSrcAddrMask
PDN-MPE-FILTER-MIB ·
.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4
Object
The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the source address within the IP packet and then compared with the mpeSysDevIPFilterSrcAddress.
Context
- MIB
- PDN-MPE-FILTER-MIB
- OID
.1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- mpeSysDevIpFilterRuleConfigTableEntry
- Table
- mpeSysDevIpFilterRuleConfigTable
- Siblings
- 18
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mpeSysDevIpRuleFilterName mandatory The value of this object corresponds directly to the name
of the filter. | column | OctetString | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.1 |
| mpeSysDevIpFilterRuleDestAddrMask mandatory The value of this object corresponds directly to an destination
IP Address Mask. The value of this object is bitwise anded
with the destination address within the IP packet and th… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.10 |
| mpeSysDevIpFilterRuleDestAddrCompEnable mandatory This object enables or disables the destination address comparison.
It is not supported for MCC. | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.11 |
| mpeSysDevIpFilterRuleDestPortNum mandatory The UDP or TCP port number of the destination on which this filter
is applied | column | Integer32 | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.12 |
| mpeSysDevIpFilterRuleMaxDestPortNum mandatory The maximum UDP or TCP port number of the destination on which
this filter is applied. This object is valid only if the destination
comparison type is in-range or out-range | column | Integer32 | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.13 |
| mpeSysDevIpFilterRuleDestCompType mandatory The value of this object corresponds to the type of
comparison which is to be made for destination based filtering
for the particular rule of the filter.
none - no comparison i… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.14 |
| mpeSysDevIpFilterRuleType mandatory The value of this object corresponds to the type of
type of rule configured
static - This indicates that the rule was configured
by an NMS either by SNMP, conso… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.15 |
| mpeSysDevIpFilterRuleProtocolTypeUdp mandatory The value of this object corresponds to the action
taken on a particular UDP packet based on the source/
destination port comparison rule. | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.16 |
| mpeSysDevIpFilterRuleProtocolTypeTcp mandatory The value of this object corresponds to the action
taken on a particular TCP packet bases on the source/
destination port comparison rule. | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.17 |
| mpeSysDevIpFilterRuleProtocolTypeIcmp mandatory The value of this object corresponds to the action
taken on a particular ICMP packet bases on the protocol
type comparison rule. | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.18 |
| mpeSysDevIpFilterRuleRowStatus mandatory The object is used to add or delete a row from
this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.19 |
| mpeSysDevIpFilterRuleNumber mandatory The value of this object corresponds directly to a rule
within a particular filter. If the value of this object
is 0, then the sets apply to the filter as a whole. For
example on… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2 |
| mpeSysDevIpFilterRuleSrcAddress mandatory The value of this object corresponds directly to an source
IP Address. This object could be set if IP packets need to be
filtered based on where it is coming from. Setting this ob… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.3 |
| mpeSysDevIpFilterRuleSrcAddrCompEnable mandatory This object enables or disables the source address comparison.
It is not supported for MCC. | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.5 |
| mpeSysDevIpFilterRuleSrcPortNum mandatory The UDP or TCP port number of the source on which this filter
is applied. | column | Integer32 | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.6 |
| mpeSysDevIpFilterRuleMaxSrcPortNum mandatory The maximum UDP or TCP port number of the source on which
this filter is applied. This object is valid only if the source
comparison type is in-range or out-range | column | Integer32 | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.7 |
| mpeSysDevIpFilterRuleSrcCompType mandatory The value of this object corresponds to the type of
comparison which is to be made for source based filtering
for the particular rule of the filter.
none - no comparison is to … | column | Enumeration | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.8 |
| mpeSysDevIpFilterRuleDestAddress mandatory The value of this object corresponds directly to an destination
IP Address. This object could be set if IP packets need to be
filtered based on where it is going to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.9 |