OS-ETH-SERV-PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
20

osEthServElpTable

table
.1.3.6.1.4.1.6926.2.33.1 · 1 row entry · 20 columns
Open in standard view 
Ethernet Linear Protection (G.8031) per service configuration table.
osEthServElpEntry entry .1.3.6.1.4.1.6926.2.33.1.1
Contains an entry of the table.
Indexes
OS-ETH-SERV-MIBosEthServId
Column Syntax OID
osEthElpApsMacAddress
The MAC Address that is used as destination in TX APS PDUs
and also used to trap RX APS PDUs.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6926.2.33.1.1.1
osEthElpTrackCcm
Enable tracking of CCM timeout events. Timeout on the
specified MA (and optionally RMEP) assigned to the service
will be considered as signal failure.
Enumerationr/w
Enumerated Values:
1none
2all
3onlyWorking
4onlyProtection
 .1.3.6.1.4.1.6926.2.33.1.1.2
osEthElpRemoteMepIdWorking
Indicates a remote MEP Id that send CCMs. A timeout
event for that remote MEP will be considered an ELP signal
failure on the WORKING trail
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Textual Convention: OS-COMMON-TC-MIBOsCfmMepIdOrZero Unsigned32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.33.1.1.3
osEthElpRemoteMepIdProtection
Indicates a remote MEP Id that send CCMs. A timeout
event for that remote MEP will be considered an ELP signal
failure on the PROTECTION trail
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Textual Convention: OS-COMMON-TC-MIBOsCfmMepIdOrZero Unsigned32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.33.1.1.4
osEthElpHoldOffDelay
Time in milliseconds to hold-off switch over in case
of a failure event.
millisecondsInteger32r/w
Constraints:
range: 0-0
range: 100-60000
 .1.3.6.1.4.1.6926.2.33.1.1.5
osEthElpRevertDelay
Following a recovery from signal failure on the WORKING
trail, time in milliseconds to wait until switching over
to the WORKING trail.
(-1) indicates Do-Not-Revert.
0 indicates revert immediately when recovery is detect…
millisecondsInteger32r/w
Constraints:
range: -1-0
range: 10-86400000
 .1.3.6.1.4.1.6926.2.33.1.1.6
osEthElpCommand
Issue a Command to mainpulate the G.8031 state
machine. Note that command may be rejected if a higher
priority condition is in effect.
This is effectively a write-only field. GET will always
return 'nothing'
ElpCommandr/w
Textual Convention: ElpCommand Enumeration
Type Values:
1unknown
2nothing
3clear
4lockout
5forcedSwitch
6manualSwitchWorking
7manualSwitchProtection
8exercise
9freeze
10clearFreeze
 .1.3.6.1.4.1.6926.2.33.1.1.7
osEthElpActiveTrail
Current active trail for the service.
Enumeration
Enumerated Values:
1working
2protection
 .1.3.6.1.4.1.6926.2.33.1.1.20
osEthElpPendingCommand
The pending managment command within the G.8031 logic.
Note that a pending command may be silently cleared by
the G.8031 logic once a higher priority condition is
encountered.
ElpCommand
Textual Convention: ElpCommand Enumeration
Type Values:
1unknown
2nothing
3clear
4lockout
5forcedSwitch
6manualSwitchWorking
7manualSwitchProtection
8exercise
9freeze
10clearFreeze
 .1.3.6.1.4.1.6926.2.33.1.1.21
osEthElpApsRxCount
The total number of APS packets received with valid
content.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.33.1.1.22
osEthElpApsTxCount
The total number of APS packets transmitted
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.33.1.1.23
osEthElpFsmStateName
The current state of the G.8031 Final-State-Machine.
This value is a string with the name of the state.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.6926.2.33.1.1.24
osEthElpFarEndFsmStateName
The far-end's last reported state of the G.8031
Final-State-Machine.
This value is a string with the name of the state.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.6926.2.33.1.1.25
osEthElpTrackCcmStateWorking
The CCM tracking state of the WORKING trail.
CcmTrackState
Textual Convention: CcmTrackState Enumeration
Type Values:
1disabled
2up
3down
 .1.3.6.1.4.1.6926.2.33.1.1.26
osEthElpTrackCcmStateProtection
The CCM tracking state of the PROTECTION trail.
CcmTrackState
Textual Convention: CcmTrackState Enumeration
Type Values:
1disabled
2up
3down
 .1.3.6.1.4.1.6926.2.33.1.1.27
osEthElpTimeToRevert
Time in seconds until ELP is going to revert from
PROTECTION to WORKING.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6926.2.33.1.1.28
osEthElpWorkingSignalState
The signal state of the WORKING trail.
Based on CCM tracking and port link state.
TrailSignalState
Textual Convention: TrailSignalState Enumeration
Type Values:
1unknown
2normal
3fail
4degrade
 .1.3.6.1.4.1.6926.2.33.1.1.29
osEthElpProtectionSignalState
The signal state of the PROTECTION trail.
Based on CCM tracking and port link state.
TrailSignalState
Textual Convention: TrailSignalState Enumeration
Type Values:
1unknown
2normal
3fail
4degrade
 .1.3.6.1.4.1.6926.2.33.1.1.30
osEthElpProtectionIndexName
Service identifier of the row that holds the protection
information for the service
OctetString
Constraints:
range: 1-30
 .1.3.6.1.4.1.6926.2.33.1.1.40
osEthElpAdminStatus
Create - create a protection row in osEthServTable in
which proteection trail properties such as s-vlan and
s-ports should be configured.
delete - delete the protection row in osEthServTable.
enable/disable - Turn Ether…
Enumerationr/w
Enumerated Values:
1unknown
2nothing
3delete
4create
5enable
6disable
 .1.3.6.1.4.1.6926.2.33.1.1.98