OMNITRON-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
10
.1.3.6.1.4.1.7342.18.2 · 1 row entry · 10 columns
This table supports the Link Aggregation port configuration table.
ostLinkAggrPortCfgEntry entry .1.3.6.1.4.1.7342.18.2.1
This is a Link Aggregation port configuration table entry. Each row
in the table indicates a specific configuration for a port in
relationship to the Link Aggregation function. These are
extensions to the standard IEEE …
Indexes
ostLinkAggrPortCfgInterfaceIndex
Column Syntax OID
ostLinkAggrPortCfgInterfaceIndex
Chassis, module and port indices to which this interface belongs.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
.1.3.6.1.4.1.7342.18.2.1.1
ostLinkAggrPortCfgLagEnable
This object selects whether the specific port participates in link
aggregation.

A value of true indicates the port can be aggregated and particpate
in the link aggregation algorithm

A value…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7342.18.2.1.2
ostLinkAggrPortCfgLacpEnable
This object selects whether the specific port participates in link
aggregation control protocol (LACP).

A value of true indicates the port can peer via LACP.

A value of false indicates the …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7342.18.2.1.3
ostLinkAggrPortCfgPortKeyAuto
This object selects whether the specific port's key value can be
automatically changed based the dynamic allocation of operational
keys found in IEEE 802.1AX section 5.6.2.

A value of true indicates the p…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7342.18.2.1.4
ostLinkAggrPortCfgActiveNum
This object selects number of active ports in a link aggregation
group as indicated by the associated port number.

If the number of active ports in a link aggregation group is equal
or greater than the nu…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.18.2.1.5
ostLinkAggrPortCfgStatsClear
Writing any value to this object clears the counter values of the
associated port in the standard LAG MIB dot3adAggPortStatsTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.18.2.1.6
ostLinkAggrPortCfgLogicalPort
This object selects the logical group for a port number when a LAG
is assigned to a logical group instead of a physical port. This is
used for a MEP assigned to a logical port instead of a physical
port.

Unsigned32r/w
Constraints:
range: 0-0
range: 81-88
.1.3.6.1.4.1.7342.18.2.1.7
ostLinkAggrPortCfgMdIndex
This object specifies the Maintenance Domain index for the MEP
that is configured on a port. If not configured (index value=0)
fail over is by link or protocol failure only.

This object can only be writte…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.18.2.1.8
ostLinkAggrPortCfgMaIndex
This object specifies the Maintenance Association index for the MEP
that is configured on a port. If not configured (index value=0)
fail over is by link or protocol failure only.

This object can only be …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.18.2.1.9
ostLinkAggrPortCfgMepId
This object specifies the Maintenance End Point Identifier (MEP).
If not configured (index value=0) fail over is by link failure only.

Normally LAG failover is based upon link or protocol failure. If a
M…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32
Type Constraints:
range: 0..8191
.1.3.6.1.4.1.7342.18.2.1.10