ostLinkAggrPortCfgMepId
OMNITRON-LAG-MIB ·
.1.3.6.1.4.1.7342.18.2.1.10
Object
This object specifies the Maintenance End Point Identifier (MEP).
If not configured (index value=0) fail over is by link failure only.
Normally LAG failover is based upon link or protocol failure. If a
MEP is correctly configured on a port failover is possible when a
MEP failure is detected. This is supported in MEF 30.1.
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- OMNITRON-LAG-MIB
- OID
.1.3.6.1.4.1.7342.18.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostLinkAggrPortCfgEntry
- Table
- ostLinkAggrPortCfgTable
- Siblings
- 9
Syntax
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
- Source
- IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..8191
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostLinkAggrPortCfgInterfaceIndex Chassis, module and port indices to which this interface belongs. | column | OMNITRON-TC-MIBOstPortSingleIndex | .1.3.6.1.4.1.7342.18.2.1.1 |
| ostLinkAggrPortCfgLagEnable This object selects whether the specific port participates in link
aggregation.
A value of true indicates the port can be aggregated and particpate
in the link aggr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.18.2.1.2 |
| ostLinkAggrPortCfgLacpEnable This object selects whether the specific port participates in link
aggregation control protocol (LACP).
A value of true indicates the port can peer via LACP.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.18.2.1.3 |
| ostLinkAggrPortCfgPortKeyAuto This object selects whether the specific port's key value can be
automatically changed based the dynamic allocation of operational
keys found in IEEE 802.1AX section 5.6.2.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.18.2.1.4 |
| ostLinkAggrPortCfgActiveNum This object selects number of active ports in a link aggregation
group as indicated by the associated port number.
If the number of active ports in a link aggregati… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.18.2.1.5 |
| ostLinkAggrPortCfgStatsClear Writing any value to this object clears the counter values of the
associated port in the standard LAG MIB dot3adAggPortStatsTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.18.2.1.6 |
| ostLinkAggrPortCfgLogicalPort This object selects the logical group for a port number when a LAG
is assigned to a logical group instead of a physical port. This is
used for a MEP assigned to a logical port ins… | column | Unsigned32 | .1.3.6.1.4.1.7342.18.2.1.7 |
| ostLinkAggrPortCfgMdIndex This object specifies the Maintenance Domain index for the MEP
that is configured on a port. If not configured (index value=0)
fail over is by link or protocol failure only.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.18.2.1.8 |
| ostLinkAggrPortCfgMaIndex This object specifies the Maintenance Association index for the MEP
that is configured on a port. If not configured (index value=0)
fail over is by link or protocol failure only.… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.18.2.1.9 |