MPLS-LDP-ATM-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
21

mplsLdpEntityAtmTable

table
.1.3.6.1.2.1.10.166.5.1.1.1 · 1 row entry · 11 columns
Open in standard view 
This table contains ATM specific information
which could be used in the
'Optional Parameters' and other ATM specific
information.
          
This table 'sparse augments' the mplsLdpEntityTable
when ATM is the Layer 2 medium.
mplsLdpEntityAtmEntry entry .1.3.6.1.2.1.10.166.5.1.1.1.1
An entry in this table represents the ATM parameters
and ATM information for this LDP entity.
Indexes
MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex
Column Syntax OID
mplsLdpEntityAtmIfIndexOrZero
This value represents either the InterfaceIndex
or 0 (zero). The value of zero means that the
InterfaceIndex is not known.

However, if the InterfaceIndex is known, then it must
be represented by this val…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.10.166.5.1.1.1.1.1
mplsLdpEntityAtmMergeCap
Denotes the Merge Capability of this Entity.
This is the EXACT value for the ATM Session
Parameter, field M (for ATM Merge Capabilities).
The ATM Session Parameter is an optional
parameter in the Initialization Message.…
Enumerationr/w
Enumerated Values:
0notSupported
1vpMerge
2vcMerge
3vpAndVcMerge
 .1.3.6.1.2.1.10.166.5.1.1.1.1.2
mplsLdpEntityAtmLRComponents
Number of Label Range Components in the Initialization
message. This also represents the number of entries
in the mplsLdpEntityAtmLRTable which correspond
to this entry.

This is the EXACT value for the A…
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.2.1.10.166.5.1.1.1.1.3
mplsLdpEntityAtmVcDirectionality
If the value of this object is 'bidirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.

If the value of this object is 'unidirectional(1)',
a given VCI wi…
Enumerationr/w
Enumerated Values:
0bidirectional
1unidirectional
 .1.3.6.1.2.1.10.166.5.1.1.1.1.4
mplsLdpEntityAtmLsrConnectivity
The peer LSR may be connected indirectly by means
of an ATM VP so that the VPI values may be different
on either endpoint so the label MUST be encoded
entirely within the VCI field.
Enumerationr/w
Enumerated Values:
1direct
2indirect
 .1.3.6.1.2.1.10.166.5.1.1.1.1.5
mplsLdpEntityAtmDefaultControlVpi
The default VPI value for the non-MPLS connection. The
default value of this is 0 (zero) but other values may
be configured. This object allows a different value
to be configured.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.1.1.1.6
mplsLdpEntityAtmDefaultControlVci
The Default VCI value for a non-MPLS connection. The
default value of this is 32 but other values may be
configured. This object allows a different value to
be configured.
MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.1.1.1.7
mplsLdpEntityAtmUnlabTrafVpi
VPI value of the VCC supporting unlabeled traffic. This
non-MPLS connection is used to carry unlabeled (IP)
packets. The default value is the same as the default
value of the 'mplsLdpEntityAtmDefaultControlVpi', howev…
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.1.1.1.8
mplsLdpEntityAtmUnlabTrafVci
VCI value of the VCC supporting unlabeled traffic.
This non-MPLS connection is used to carry unlabeled (IP)
packets. The default value is the same as the default
value of the 'mplsLdpEntityAtmDefaultControlVci', however…
MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.1.1.1.9
mplsLdpEntityAtmStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.166.5.1.1.1.1.10
mplsLdpEntityAtmRowStatus
The status of this conceptual row. All writable
objects in this row may be modified at any time,
however, as described in detail in the section
entitled, 'Changing Values After Session
Establishment', and again describ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.166.5.1.1.1.1.11

mplsLdpEntityAtmLRTable

table
.1.3.6.1.2.1.10.166.5.1.1.2 · 1 row entry · 6 columns
Open in standard view 
The MPLS LDP Entity ATM Label Range (LR) Table.
The purpose of this table is to provide a mechanism
for configuring a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.
          
There must exist at least one entry in this
table for every LDP Entity that has
'mplsLdpEntityOptionalParameters' object with
a value of 'atmSessionParameters'.
mplsLdpEntityAtmLREntry entry .1.3.6.1.2.1.10.166.5.1.1.2.1
A row in the LDP Entity ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs. These are the same
data used …
Indexes
MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex mplsLdpEntityAtmLRMinVpi mplsLdpEntityAtmLRMinVci
Column Syntax OID
mplsLdpEntityAtmLRMinVpi
The minimum VPI number configured for this range.
The value of zero is a valid value for the VPI portion
of the label.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.1.2.1.1
mplsLdpEntityAtmLRMinVci
The minimum VCI number configured for this range.
MPLS-TC-STD-MIBMplsAtmVcIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.1.2.1.2
mplsLdpEntityAtmLRMaxVpi
The maximum VPI number configured for this range.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.1.2.1.3
mplsLdpEntityAtmLRMaxVci
The maximum VCI number configured for this range.
MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.1.2.1.4
mplsLdpEntityAtmLRStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.166.5.1.1.2.1.5
mplsLdpEntityAtmLRRowStatus
The status of this conceptual row. All writable
objects in this row may be modified at any time,
however, as described in detail in the section
entitled, 'Changing Values After Session
Establishment', and again describ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.166.5.1.1.2.1.6

mplsLdpAtmSessionTable

table
.1.3.6.1.2.1.10.166.5.1.2.1 · 1 row entry · 4 columns
Open in standard view 
A table which relates sessions in the
'mplsLdpSessionTable' and their label
range intersections.  There could be one
or more label range intersections between an
LDP Entity and LDP Peer using ATM as the
underlying  media.  Each row represents
a single label range intersection.
          
This table cannot use the 'AUGMENTS'
clause because there is not necessarily
a one-to-one mapping between this table
and the mplsLdpSessionTable.
mplsLdpAtmSessionEntry entry .1.3.6.1.2.1.10.166.5.1.2.1.1
An entry in this table represents information on a
single label range intersection between an LDP Entity
and LDP Peer.

The information contained in a row is read-only.
Indexes
MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex MPLS-LDP-STD-MIBmplsLdpPeerLdpId mplsLdpSessionAtmLRLowerBoundVpi mplsLdpSessionAtmLRLowerBoundVci
Column Syntax OID
mplsLdpSessionAtmLRLowerBoundVpi
The minimum VPI number for this range.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.2.1.1.1
mplsLdpSessionAtmLRLowerBoundVci
The minimum VCI number for this range.
MPLS-TC-STD-MIBMplsAtmVcIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.2.1.1.2
mplsLdpSessionAtmLRUpperBoundVpi
The maximum VPI number for this range.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.5.1.2.1.1.3
mplsLdpSessionAtmLRUpperBoundVci
The maximum VCI number for this range.
MPLS-TC-STD-MIBMplsAtmVcIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsAtmVcIdentifier Integer32
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.5.1.2.1.1.4