mplsLdpEntityAtmMergeCap

MPLS-LDP-ATM-STD-MIB · .1.3.6.1.2.1.10.166.5.1.1.1.1.2
MIB view Table view

Object

column r/w Enumeration 
Denotes the Merge Capability of this Entity.
This is the EXACT value for the ATM Session
Parameter, field M (for ATM Merge Capabilities).
The ATM Session Parameter is an optional
parameter in the Initialization Message.
              
The description from rfc3036.txt is:
              
'M, ATM Merge Capabilities
   Specifies the merge capabilities of an ATM switch.  The
   following values are supported in this version of the
   specification:
              
          Value          Meaning
              
            0            Merge not supported
            1            VP Merge supported
            2            VC Merge supported
            3            VP & VC Merge supported
              
   If the merge capabilities of the LSRs differ, then:
   -  Non-merge and VC-merge LSRs may freely interoperate.
              
   -  The interoperability of VP-merge-capable switches
      with non-VP-merge-capable switches is a subject
      for future study.  When the LSRs differ on the
      use of VP-merge, the session is established,
      but VP merge is not used.'
              
   Please refer to the following reference for a
   complete description of this feature.

Context

MIB
MPLS-LDP-ATM-STD-MIB
OID
.1.3.6.1.2.1.10.166.5.1.1.1.1.2
Type
column
Access
readwrite
Status
current
Parent
mplsLdpEntityAtmEntry
Table
mplsLdpEntityAtmTable
Siblings
10

Syntax

Enumeration

Values & Constraints

Enumerated Values
0notSupported
1vpMerge
2vcMerge
3vpAndVcMerge

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsLdpEntityAtmIfIndexOrZero
This value represents either the InterfaceIndex or 0 (zero). The value of zero means that the InterfaceIndex is not known. However, if the InterfaceIndex is known,…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.2.1.10.166.5.1.1.1.1.1
mplsLdpEntityAtmStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.2.1.10.166.5.1.1.1.1.10
mplsLdpEntityAtmRowStatus
The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After S…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.166.5.1.1.1.1.11
mplsLdpEntityAtmLRComponents
Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityAtmLRTable which correspond to this entry. …
columnUnsigned32.1.3.6.1.2.1.10.166.5.1.1.1.1.3
mplsLdpEntityAtmVcDirectionality
If the value of this object is 'bidirectional(0)', a given VCI, within a given VPI, is used as a label for both directions independently. If the value of this objec…
columnEnumeration.1.3.6.1.2.1.10.166.5.1.1.1.1.4
mplsLdpEntityAtmLsrConnectivity
The peer LSR may be connected indirectly by means of an ATM VP so that the VPI values may be different on either endpoint so the label MUST be encoded entirely within the VCI fiel…
columnEnumeration.1.3.6.1.2.1.10.166.5.1.1.1.1.5
mplsLdpEntityAtmDefaultControlVpi
The default VPI value for the non-MPLS connection. The default value of this is 0 (zero) but other values may be configured. This object allows a different value to be configure…
columnATM-TC-MIBAtmVpIdentifier.1.3.6.1.2.1.10.166.5.1.1.1.1.6
mplsLdpEntityAtmDefaultControlVci
The Default VCI value for a non-MPLS connection. The default value of this is 32 but other values may be configured. This object allows a different value to be configured.
columnMPLS-TC-STD-MIBMplsAtmVcIdentifier.1.3.6.1.2.1.10.166.5.1.1.1.1.7
mplsLdpEntityAtmUnlabTrafVpi
VPI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the default value of the 'm…
columnATM-TC-MIBAtmVpIdentifier.1.3.6.1.2.1.10.166.5.1.1.1.1.8
mplsLdpEntityAtmUnlabTrafVci
VCI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the default value of the 'mpl…
columnMPLS-TC-STD-MIBMplsAtmVcIdentifier.1.3.6.1.2.1.10.166.5.1.1.1.1.9