mplsLdpEntityAtmUnlabTrafVpi
MPLS-LDP-ATM-STD-MIB ·
.1.3.6.1.2.1.10.166.5.1.1.1.1.8
Object
VPI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the default value of the 'mplsLdpEntityAtmDefaultControlVpi', however another value may be configured.
Context
- MIB
- MPLS-LDP-ATM-STD-MIB
- OID
.1.3.6.1.2.1.10.166.5.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLdpEntityAtmEntry
- Table
- mplsLdpEntityAtmTable
- Siblings
- 10
Syntax
ATM-TC-MIBAtmVpIdentifier
- Source
- ATM-TC-MIBAtmVpIdentifier
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityAtmIfIndexOrZero This value represents either the InterfaceIndex
or 0 (zero). The value of zero means that the
InterfaceIndex is not known.
However, if the InterfaceIndex is known,… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.166.5.1.1.1.1.1 |
| mplsLdpEntityAtmStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.5.1.1.1.1.10 |
| mplsLdpEntityAtmRowStatus The status of this conceptual row. All writable
objects in this row may be modified at any time,
however, as described in detail in the section
entitled, 'Changing Values After S… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.5.1.1.1.1.11 |
| mplsLdpEntityAtmMergeCap Denotes the Merge Capability of this Entity.
This is the EXACT value for the ATM Session
Parameter, field M (for ATM Merge Capabilities).
The ATM Session Parameter is an optional
… | column | Enumeration | .1.3.6.1.2.1.10.166.5.1.1.1.1.2 |
| mplsLdpEntityAtmLRComponents Number of Label Range Components in the Initialization
message. This also represents the number of entries
in the mplsLdpEntityAtmLRTable which correspond
to this entry.
… | column | Unsigned32 | .1.3.6.1.2.1.10.166.5.1.1.1.1.3 |
| mplsLdpEntityAtmVcDirectionality If the value of this object is 'bidirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.
If the value of this objec… | column | Enumeration | .1.3.6.1.2.1.10.166.5.1.1.1.1.4 |
| mplsLdpEntityAtmLsrConnectivity The peer LSR may be connected indirectly by means
of an ATM VP so that the VPI values may be different
on either endpoint so the label MUST be encoded
entirely within the VCI fiel… | column | Enumeration | .1.3.6.1.2.1.10.166.5.1.1.1.1.5 |
| mplsLdpEntityAtmDefaultControlVpi The default VPI value for the non-MPLS connection. The
default value of this is 0 (zero) but other values may
be configured. This object allows a different value
to be configure… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.2.1.10.166.5.1.1.1.1.6 |
| mplsLdpEntityAtmDefaultControlVci The Default VCI value for a non-MPLS connection. The
default value of this is 32 but other values may be
configured. This object allows a different value to
be configured. | column | MPLS-TC-STD-MIBMplsAtmVcIdentifier | .1.3.6.1.2.1.10.166.5.1.1.1.1.7 |
| mplsLdpEntityAtmUnlabTrafVci VCI value of the VCC supporting unlabeled traffic.
This non-MPLS connection is used to carry unlabeled (IP)
packets. The default value is the same as the default
value of the 'mpl… | column | MPLS-TC-STD-MIBMplsAtmVcIdentifier | .1.3.6.1.2.1.10.166.5.1.1.1.1.9 |