LUM-MPLSOAM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
38
mplsOamBfdSessTable
table.1.3.6.1.4.1.8708.2.44.2.2.1
·
1 row entry
·
29 columns
The BFD Session Table describes the BFD sessions.
The BFD Session Entry describes a single BFD session.
Indexes
mplsOamBfdSessIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsOamBfdSessIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.1 |
||||||||||||||||||||
|
mplsOamBfdSessInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.2 |
||||||||||||||||||||
|
mplsOamBfdSessName
The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. For LSPs 'myIdentifier' is set to the LSP identifier. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.3 |
||||||||||||||||||||
|
mplsOamBfdSessAdminStatus
A transition from 'down' to 'up' will start
the BFD state machine for the session. The state machine will have an initial state of down. A transition from 'up' to 'down' will cause the BFD session to be brought down to … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.4 |
||||||||||||||||||||
|
mplsOamBfdSessState
BFD session state.
none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the requested BFD administr… |
BfdSessStateTC Textual Convention: BfdSessStateTC EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.5 |
||||||||||||||||||||
|
mplsOamBfdSessRemoteState
BFD session state.
none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the requested BFD administr… |
BfdSessStateTC Textual Convention: BfdSessStateTC EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.6 |
||||||||||||||||||||
|
mplsOamBfdSessDiag
A diagnostic code specifying the local systems reason
for the last transition of the session from up to some other state. noDiagnostic - Normal state of session when no fault detected. cont… |
BfdDiagTC Textual Convention: BfdDiagTC EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.7 |
||||||||||||||||||||
|
mplsOamBfdSessRemoteDiag
A diagnostic code specifying the remote systems reason
for the last transition of the session from up to some other state. noDiagnostic - Normal state of session when no fault detected. con… |
BfdDiagTC Textual Convention: BfdDiagTC EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.8 |
||||||||||||||||||||
|
mplsOamBfdSessNegotiatedTxInterval
This object specifies the negotiated interval
that the local system is transmitting BFD Control packets. Display unit is milliseconds but the storage type is microseconds. |
BfdIntervalTC Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.9 |
||||||||||||||||||||
|
mplsOamBfdSessNegotiatedRxInterval
This object specifies the negotiated interval
that the local system is receiving BFD Control packets. Display unit is milliseconds but the storage type is microseconds. |
BfdIntervalTC Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.10 |
||||||||||||||||||||
|
mplsOamBfdSessMonitoringPath
Name of the path the BFD object is monitoring.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.11 |
||||||||||||||||||||
|
mplsOamBfdSessMonitoringPathType
This object indicates the type of path being monitored by this
BFD session entry, LSP, PW, or MEP. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.12 |
||||||||||||||||||||
|
mplsOamBfdSessMonitoringPathIndex
Index of the path of the BFD object is monitoring.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.13 |
||||||||||||||||||||
|
mplsOamBfdSessTemplate
ID of the associated LSP that is active, if exists.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.14 |
||||||||||||||||||||
|
mplsOamBfdSessTemplateIndex
The index of the associated LSP that is active,
if exists. |
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.15 |
||||||||||||||||||||
|
mplsOamBfdSessSourceMepId
Actual configuration of source MEP ID for current
BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]' |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.16 |
||||||||||||||||||||
|
mplsOamBfdSessTargetMepId
Actual configuration of target MEP ID for current
BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]' |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.17 |
||||||||||||||||||||
|
mplsOamBfdSessRcvTargetMepId
Actual configuration of target MEP ID for current
BFD session received from traffic unit of corresponding BFD session via CV packages.The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel I… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.18 |
||||||||||||||||||||
|
mplsOamBfdSessMepNotConfigured
MEP-ID for tunnel, node or LSP are set to zero, source or remote.
The CV messages will be transmitted but the connectivity verification will have degraded function. |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.19 |
||||||||||||||||||||
|
mplsOamBfdSessLocalNotConnected
No packages received from remote BFD session.
|
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.20 |
||||||||||||||||||||
|
mplsOamBfdSessLocalMisConnectivity
Invalid MEP-ID-TLV received by local session.
MPLS-TP MEP-ID-TLV does from CV messages does not match local configuration. BFD session is connected to wrong peer BFD session or MEP IDs are not configured correctly. BFD … |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.21 |
||||||||||||||||||||
|
mplsOamBfdSessLocalTimerExpired
Local BFD session has not received valid CC
packages for an interval of more than detection multiplier times the negotiated RX interval. Check for layer 1 problems Check port settings Check MPLS-TP network set-up for mi… |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.22 |
||||||||||||||||||||
|
mplsOamBfdSessRemoteMisConnectivity
The local BFD session has received an indication that the
peer BFD session is in down state due to an invalid received MPLS-TP MEP-ID-TLV. Check local source and peer remote MEP-ID-TLV configuration. |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.23 |
||||||||||||||||||||
|
mplsOamBfdSessRemoteTimerExpired
Remote time-out for CC packages.
|
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.24 |
||||||||||||||||||||
|
mplsOamBfdSessRemoteAdminDown
The local BFD session has received an indication
that the peer BFD session is in administrative down state. Check peer BFD session |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.25 |
||||||||||||||||||||
|
mplsOamBfdSessRowStatus
This variable is used to create, modify, and/or
delete a row in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.26 |
||||||||||||||||||||
|
mplsOamBfdSessDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used. Display unit is milli… |
BfdIntervalTC Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.27 |
||||||||||||||||||||
|
mplsOamBfdSessReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) is not supported. Display unit is milliseconds but the s… |
BfdIntervalTC Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.28 |
||||||||||||||||||||
|
mplsOamBfdSessTrafficClass
The entry signifies the Traffic Class used on the
traffic generated by the BFD session CV and CC messages. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.8708.2.44.2.2.1.1.29 |
mplsOamBfdTemplateTable
table.1.3.6.1.4.1.8708.2.44.2.3.2
·
1 row entry
·
9 columns
The BFD template table describes the common templates for BFD sessions.
The BFD template entry describes the common templates for BFD sessions.
Indexes
mplsOamBfdTemplateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsOamBfdTemplateIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.1 |
||||||||||||
|
mplsOamBfdTemplateInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.2 |
||||||||||||
|
mplsOamBfdTemplateName
The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.3 |
||||||||||||
|
mplsOamBfdTemplateIdentifier
A unique identifier for template object.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.4 |
||||||||||||
|
mplsOamBfdTemplateDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used. Display unit is milli… |
BfdIntervalTCr/w Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.5 |
||||||||||||
|
mplsOamBfdTemplateDetectMult
This object specifies the 'detect time' multiplier for
raising an alarm. Number of loss BFD CC packets. This parameter is not configurable. |
BfdMultiplierTCr/w Textual Convention: BfdMultiplierTC Unsigned32Type Constraints: range: 1..255 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.6 |
||||||||||||
|
mplsOamBfdTemplateReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) is not supported. Display unit is milliseconds but the s… |
BfdIntervalTCr/w Textual Convention: BfdIntervalTC Unsigned32Type Constraints: range: 0..1000000 |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.7 |
||||||||||||
|
mplsOamBfdTemplateCreateNewTemplate
Internal command for creating a new BFD template.
Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD control packets. Configur… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.44.2.3.2.1.8 |
||||||||||||
|
mplsOamBfdTemplateRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mplsOamBfdTemplateRowStatus and mp… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.44.2.3.2.1.9 |