mplsOamBfdSessTrafficClass
LUM-MPLSOAM-MIB ·
.1.3.6.1.4.1.8708.2.44.2.2.1.1.29
Object
column
r/w
Unsigned32
The entry signifies the Traffic Class used on the traffic generated by the BFD session CV and CC messages.
Context
- MIB
- LUM-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.8708.2.44.2.2.1.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsOamBfdSessEntry
- Table
- mplsOamBfdSessTable
- Siblings
- 28
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOamBfdSessIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.1 |
| mplsOamBfdSessNegotiatedRxInterval This object specifies the negotiated interval
that the local system is receiving
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds. | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.10 |
| mplsOamBfdSessMonitoringPath Name of the path the BFD object is monitoring. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.11 |
| mplsOamBfdSessMonitoringPathType This object indicates the type of path being monitored by this
BFD session entry, LSP, PW, or MEP. | column | Enumeration | .1.3.6.1.4.1.8708.2.44.2.2.1.1.12 |
| mplsOamBfdSessMonitoringPathIndex Index of the path of the BFD object is monitoring. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.13 |
| mplsOamBfdSessTemplate ID of the associated LSP that is active, if exists. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.14 |
| mplsOamBfdSessTemplateIndex The index of the associated LSP that is active,
if exists. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.15 |
| mplsOamBfdSessSourceMepId Actual configuration of source MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.
'[Global ID]:[Node ID]:[Tunnel Id]:[… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.16 |
| mplsOamBfdSessTargetMepId Actual configuration of target MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.
'[Global ID]:[Node ID]:[Tunnel Id]:[… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.17 |
| mplsOamBfdSessRcvTargetMepId Actual configuration of target MEP ID for current
BFD session received from traffic unit of corresponding BFD
session via CV packages.The identifier of
the tunnel and LSP.
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.18 |
| mplsOamBfdSessMepNotConfigured MEP-ID for tunnel, node or LSP are set to zero, source or remote.
The CV messages will be transmitted but the connectivity verification
will have degraded function. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.19 |
| mplsOamBfdSessInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.2 |
| mplsOamBfdSessLocalNotConnected No packages received from remote BFD session. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.20 |
| mplsOamBfdSessLocalMisConnectivity Invalid MEP-ID-TLV received by local session.
MPLS-TP MEP-ID-TLV does from CV messages does
not match local configuration. BFD session is
connected to wrong peer BFD session or ME… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.21 |
| mplsOamBfdSessLocalTimerExpired Local BFD session has not received valid CC
packages for an interval of more than detection
multiplier times the negotiated RX interval.
Check for layer 1 problems
Check port sett… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.22 |
| mplsOamBfdSessRemoteMisConnectivity The local BFD session has received an indication that the
peer BFD session is in down state due to an invalid
received MPLS-TP MEP-ID-TLV.
Check local source and peer remote MEP-I… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.23 |
| mplsOamBfdSessRemoteTimerExpired Remote time-out for CC packages. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.24 |
| mplsOamBfdSessRemoteAdminDown The local BFD session has received an indication
that the peer BFD session is in administrative down
state.
Check peer BFD session | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.25 |
| mplsOamBfdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.26 |
| mplsOamBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and s… | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.27 |
| mplsOamBfdSessReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) is not supported… | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.28 |
| mplsOamBfdSessName The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates
subrack and the second slot number. For LSPs 'myIdentifier'
is set… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.3 |
| mplsOamBfdSessAdminStatus A transition from 'down' to 'up' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'up' to 'down' will caus… | column | Enumeration | .1.3.6.1.4.1.8708.2.44.2.2.1.1.4 |
| mplsOamBfdSessState BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.
adminDown - State the BFD session is in when… | column | BfdSessStateTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.5 |
| mplsOamBfdSessRemoteState BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.
adminDown - State the BFD session is in when… | column | BfdSessStateTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.6 |
| mplsOamBfdSessDiag A diagnostic code specifying the local systems reason
for the last transition of the session from up
to some other state.
noDiagnostic
- Normal state of session whe… | column | BfdDiagTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.7 |
| mplsOamBfdSessRemoteDiag A diagnostic code specifying the remote systems reason
for the last transition of the session from up
to some other state.
noDiagnostic
- Normal state of session wh… | column | BfdDiagTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.8 |
| mplsOamBfdSessNegotiatedTxInterval This object specifies the negotiated interval
that the local system is transmitting
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds. | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.9 |