mplsOamBfdSessLocalMisConnectivity
LUM-MPLSOAM-MIB ·
.1.3.6.1.4.1.8708.2.44.2.2.1.1.21
Object
column
LUM-TCFaultStatus
Invalid MEP-ID-TLV received by local session. MPLS-TP MEP-ID-TLV does from CV messages does not match local configuration. BFD session is connected to wrong peer BFD session or MEP IDs are not configured correctly. BFD session will display expected and actual values. Check configuration of MPLS-TP MEP ID for remote and peer end. Check MPLS-TP network set-up for misconfiguration.
Context
- MIB
- LUM-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.8708.2.44.2.2.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mplsOamBfdSessEntry
- Table
- mplsOamBfdSessTable
- Siblings
- 28
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOamBfdSessIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.1 |
| mplsOamBfdSessNegotiatedRxInterval This object specifies the negotiated interval
that the local system is receiving
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds. | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.10 |
| mplsOamBfdSessMonitoringPath Name of the path the BFD object is monitoring. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.11 |
| mplsOamBfdSessMonitoringPathType This object indicates the type of path being monitored by this
BFD session entry, LSP, PW, or MEP. | column | Enumeration | .1.3.6.1.4.1.8708.2.44.2.2.1.1.12 |
| mplsOamBfdSessMonitoringPathIndex Index of the path of the BFD object is monitoring. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.13 |
| mplsOamBfdSessTemplate ID of the associated LSP that is active, if exists. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.14 |
| mplsOamBfdSessTemplateIndex The index of the associated LSP that is active,
if exists. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.15 |
| mplsOamBfdSessSourceMepId Actual configuration of source MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.
'[Global ID]:[Node ID]:[Tunnel Id]:[… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.16 |
| mplsOamBfdSessTargetMepId Actual configuration of target MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.
'[Global ID]:[Node ID]:[Tunnel Id]:[… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.17 |
| mplsOamBfdSessRcvTargetMepId Actual configuration of target MEP ID for current
BFD session received from traffic unit of corresponding BFD
session via CV packages.The identifier of
the tunnel and LSP.
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.18 |
| mplsOamBfdSessMepNotConfigured MEP-ID for tunnel, node or LSP are set to zero, source or remote.
The CV messages will be transmitted but the connectivity verification
will have degraded function. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.19 |
| mplsOamBfdSessInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.2 |
| mplsOamBfdSessLocalNotConnected No packages received from remote BFD session. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.20 |
| mplsOamBfdSessLocalTimerExpired Local BFD session has not received valid CC
packages for an interval of more than detection
multiplier times the negotiated RX interval.
Check for layer 1 problems
Check port sett… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.22 |
| mplsOamBfdSessRemoteMisConnectivity The local BFD session has received an indication that the
peer BFD session is in down state due to an invalid
received MPLS-TP MEP-ID-TLV.
Check local source and peer remote MEP-I… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.23 |
| mplsOamBfdSessRemoteTimerExpired Remote time-out for CC packages. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.24 |
| mplsOamBfdSessRemoteAdminDown The local BFD session has received an indication
that the peer BFD session is in administrative down
state.
Check peer BFD session | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.25 |
| mplsOamBfdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.44.2.2.1.1.26 |
| mplsOamBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and s… | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.27 |
| mplsOamBfdSessReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) is not supported… | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.28 |
| mplsOamBfdSessTrafficClass The entry signifies the Traffic Class used on the
traffic generated by the BFD session CV and CC messages. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.44.2.2.1.1.29 |
| mplsOamBfdSessName The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates
subrack and the second slot number. For LSPs 'myIdentifier'
is set… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.44.2.2.1.1.3 |
| mplsOamBfdSessAdminStatus A transition from 'down' to 'up' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'up' to 'down' will caus… | column | Enumeration | .1.3.6.1.4.1.8708.2.44.2.2.1.1.4 |
| mplsOamBfdSessState BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.
adminDown - State the BFD session is in when… | column | BfdSessStateTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.5 |
| mplsOamBfdSessRemoteState BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.
adminDown - State the BFD session is in when… | column | BfdSessStateTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.6 |
| mplsOamBfdSessDiag A diagnostic code specifying the local systems reason
for the last transition of the session from up
to some other state.
noDiagnostic
- Normal state of session whe… | column | BfdDiagTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.7 |
| mplsOamBfdSessRemoteDiag A diagnostic code specifying the remote systems reason
for the last transition of the session from up
to some other state.
noDiagnostic
- Normal state of session wh… | column | BfdDiagTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.8 |
| mplsOamBfdSessNegotiatedTxInterval This object specifies the negotiated interval
that the local system is transmitting
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds. | column | BfdIntervalTC | .1.3.6.1.4.1.8708.2.44.2.2.1.1.9 |