LUM-IFBASIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
49

ifBasicIfTable

table
.1.3.6.1.4.1.8708.2.46.2.2.1 · 1 row entry · 7 columns
Open in standard view 
The if basic if interface list.
ifBasicIfEntry entry .1.3.6.1.4.1.8708.2.46.2.2.1.1
An entry in the ifBasic if list.
Indexes
ifBasicIfIndex
Column Syntax OID
ifBasicIfIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.1
ifBasicIfName
The management name of the interface, for example
'client:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.2
ifBasicIfTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.3
ifBasicIfRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.4
ifBasicIfUpId
Identity in the UP for the interface. The upId is used internally between CU and
TU to define a certain interface in the TU.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.5
ifBasicIfAid
The access identifier (AID) of the interface.
The format is according to GR-833.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.6
ifBasicIfPhysicalLocation
The physical location of the if.
The format is according to GR-833.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.2.1.1.7

ifBasicAdminTable

table
.1.3.6.1.4.1.8708.2.46.2.3.1 · 1 row entry · 15 columns
Open in standard view 
The if basic admin interface list.
ifBasicAdminEntry entry .1.3.6.1.4.1.8708.2.46.2.3.1.1
An entry in the ifBasic admin list.
Indexes
ifBasicAdminIndex
Column Syntax OID
ifBasicAdminIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.1
ifBasicAdminName
The management name of the interface, for example
'admin:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.2
ifBasicAdminDescr
User configurable label.
LUM-TCDisplayStringWithNAr/w
Textual Convention: LUM-TCDisplayStringWithNA OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.3
ifBasicAdminSubrack
The subrack of the physical port that this interface is bound to.
LUM-TCUnsigned32WithNAr/w
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.4
ifBasicAdminSlot
The slot of the physical port that this interface is bound to.
LUM-TCUnsigned32WithNAr/w
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.5
ifBasicAdminTxPort
The transmitting physical port that this interface is bound to.
LUM-TCUnsigned32WithNAr/w
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.6
ifBasicAdminRxPort
The receiving physical port that this interface is bound to.
LUM-TCUnsigned32WithNAr/w
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.7
ifBasicAdminAdminStatus
The administrative state of the ifBasic interface.

down - The interface is de-activated.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or r…
LUM-TCAdminStatusWithNAr/w
Textual Convention: LUM-TCAdminStatusWithNA Enumeration
Type Values:
1down
2service
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.8
ifBasicAdminOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCOperStatusWithNA
Textual Convention: LUM-TCOperStatusWithNA Enumeration
Type Values:
1notPresent
2down
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.9
ifBasicAdminAutoAlarmEnableStatus
The state of auto alarm enable for the interface.

suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed
suppressSignal - Only signal alarms are suppressed
suppressNone -…
LUM-TCAutoAlarmStatus
Textual Convention: LUM-TCAutoAlarmStatus Enumeration
Type Values:
1suppressTrxAndSignal
2suppressSignal
3suppressNone
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.10
ifBasicAdminAutoAlarmEnableReset
When the attribute is set to reset the auto-alarm enable function
is re-initialised. Then the attribute is set to normal again
automatically.

reset - Re-initialises the auto-alarm enable function
…
LUM-TCResetWithNA
Textual Convention: LUM-TCResetWithNA Enumeration
Type Values:
1reset
2normal
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.11
ifBasicAdminInterfaceStatus
The status of the traffic interface.

outOfService - No PM and no alarms.
autoInService - No PM and no alarms. Changes to 'inService' when OK.
inService - Reports PM and alarms.
maintenance …
LUM-TCInterfaceStatus
Textual Convention: LUM-TCInterfaceStatus Enumeration
Type Values:
1outOfService
2autoInService
3inService
4maintenance
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.12
ifBasicAdminIfNo
The physical interface number of the actual multi-connector port.
LUM-TCUnsigned32WithNAr/w
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.13
ifBasicAdminIfType
Type of interface (Individual or bundled).
LUM-TCInterfaceTyper/w
Textual Convention: LUM-TCInterfaceType Enumeration
Type Values:
1individual
2bundled
3bundledSplit
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.14
ifBasicAdminNotAvailableForUse
Is the interface not available for use.
The interface may be created in order to show some
physical properties but may otherwise be unavailable
for service depending on setup and available resources.
LUM-TCTruthValueWithNA
Textual Convention: LUM-TCTruthValueWithNA Enumeration
Type Values:
0true
1false
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.3.1.1.15

ifBasicSignalTable

table
.1.3.6.1.4.1.8708.2.46.2.4.1 · 1 row entry · 27 columns
Open in standard view 
The if basic signal interface list.
ifBasicSignalEntry entry .1.3.6.1.4.1.8708.2.46.2.4.1.1
An entry in the ifBasic signal list.
Indexes
ifBasicSignalIndex
Column Syntax OID
ifBasicSignalIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.1
ifBasicSignalName
The management name of the interface, for example
'signal:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.2
ifBasicSignalSignalStructure
The signal structure used. Bitfield 64 bit wide. For internal use.
Bit 0 tells if mib ifBasicPhysicalTrx is loaded,
bit 1 ifBasicOpticalTranssection, etc according to list below.
Add new items last.
ifPhysicalTrx
if…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.3
ifBasicSignalSignalFormat
The signal format.
LUM-TCSignalFormatr/w
Textual Convention: LUM-TCSignalFormat Enumeration
Type Values:
1other
2stm1
3stm4
4stm16
5gbE
6stm64
7fc1Gb
8fc2Gb
9wan10GbE
10unused
11lan10GbE
12escon
13esconLL
14dvb270
15oc3
16oc12
17oc48
18oc192
19hdtv1485
20ethernet
21fastEthernet
22lan10GbEFec
23wan10GbEStm64Fec
24fc4Gb
25etr
26auto
27down
28stm1Oc3
29stm4Oc12
30stm16Oc48
31stm64Oc192
32gbe9Line
34ddgbeLine
35gbEorTrm5500
36fc8Gb
37otu2
38otu2e
39e1
40t1
41mbh2Gb5
42syncE
43line4G
44mbh4Gbps
45fecLan10GbE1A
46fecLan10GbE1B
47sdi3G
48iWdm4G
49sdSdi270
50hdtvNTSC
51oc768
52stm256
53lan40GbE
54wan40GbE
55sfStm256Oc768
56iwdm40Gb
57otu4
58lan100GbE
59transpLan10GbE
60cpri1
61cpri2
62cpri3
63cpri4
64cpri5
65cpri6
66cpri7
67fc10Gb
68fc16Gb
69cpri8
70obsai1x
71obsai2x
72obsai4x
73obsai8x
74otu1
75iwdm11G
76rw100G
77rw200G
78otu4SdFec
79otuj1
80otuj2
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.4
ifBasicSignalFarEndLoopbackTerminatingLayer
The layer where the far end loopback (a.k.a.
terminal loopback for a client interface and
facility loopback for a line interface) is done.
This is coded in a bitmask
LUM-TCLayer
Textual Convention: LUM-TCLayer Unsigned32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.5
ifBasicSignalFarEndLoopback
The far end loopback (a.k.a. terminal loopback for
a client interface and facility loopback for a line
interface) setting.

disabled - Far end loopback is not set. This is the
default setting.
…
LUM-TCEnabledDisabledWithNAr/w
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.6
ifBasicSignalFarEndLoopbackTimeout
Timeout for far end loopback (a.k.a. terminal
loopback for a client interface and facility
loopback for a line interfac) to make sure
connection to node is not lost if ppp link is
broken. The unit is minutes. The value …
LUM-TCTime7200minr/w
Textual Convention: LUM-TCTime7200min Integer32
Type Constraints:
range: 0..7200
range: 2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.7
ifBasicSignalNearEndLoopbackTerminatingLayer
The layer where the near end loopback (a.k.a.
terminal loopback for a line interface and facility
loopback for a client interface) is done.
This is coded in a bitmask.
LUM-TCLayer
Textual Convention: LUM-TCLayer Unsigned32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.8
ifBasicSignalNearEndLoopback
The near end loopback (a.k.a. terminal
loopback for a line interface and facility loopback
for a client interface) setting.

disabled - Near end loopback is not set. This is the
default setting.
…
LUM-TCEnabledDisabledWithNAr/w
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.9
ifBasicSignalNearEndLoopbackTimeout
Timeout for near end loopback (a.k.a. terminal
loopback for a line interface and facility loopback
for a client interface) to make sure connection to
node is not lost if ppp link is broken. The unit is
minutes. The valu…
LUM-TCTime7200minr/w
Textual Convention: LUM-TCTime7200min Integer32
Type Constraints:
range: 0..7200
range: 2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.10
ifBasicSignalFarEndLoopbackEnabled
Far end end loopback (a.k.a. terminal loopback for
a client interface and facility loopback for a line
interface) is enabled.

alarm: Far end loopback is enabled.

ok: Far end loopback is dis…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.11
ifBasicSignalNearEndLoopbackEnabled
Near end end loopback (a.k.a. terminal loopback for
a line interface and facility loopback for a client
interface) is enabled.

alarm: Near end loopback is enabled.

ok: Near end loopback is …
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.12
ifBasicSignalOpticalLayerMapping
The optical layer mapping.
LUM-TCOpticalLayerMappingTyper/w
Textual Convention: LUM-TCOpticalLayerMappingType Enumeration
Type Values:
0undefined
1fourOpticalLanes
2tenOpticalLanes
3singleOpticalChannel
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.13
ifBasicSignalConfigurationMismatch deprecated
The inserted transceiver does not support the
configuration of the optical layer mapping.

alarm: A transceiver with other supported optical layer
mapping than the requested mapping is inserted.
…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.14
ifBasicSignalActualOpticalLayerMapping
The actual optical layer mapping.
LUM-TCOpticalLayerMappingType
Textual Convention: LUM-TCOpticalLayerMappingType Enumeration
Type Values:
0undefined
1fourOpticalLanes
2tenOpticalLanes
3singleOpticalChannel
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.15
ifBasicSignalSpeed
The expected signal bit rate in units of
10,000 bits (0.01 Mb) per second.
Unsigned32r/w
Constraints:
range: 61440-1402500
range: 2147483647-2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.16
ifBasicSignalDirection
The direction in which this object is
referred to.

rx - In bound direction. (1)

tx - out bound direction. (2)

biDir - the interface has one connector used for both rx a…
LUM-TCSignalDirection
Textual Convention: LUM-TCSignalDirection Enumeration
Type Values:
1rx
2tx
3biDir
4txRx
2147483646notAvailable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.17
ifBasicSignalFormatConfigurable
This atttribute indicates if the interface is format configurable or not

true - The interface is format configurable

false - The interface is not format configurable
Enumeration
Enumerated Values:
1true
2false
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.18
ifBasicSignalFormatConfigurationSharedWithInterface
This attribute specifies whether this object instances shares the format
configuration with another object instance.
value == 0: it is not shared
value != 0: it is shared with the interface object with index = val…
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.19
ifBasicSignalPhysicalLayerMapping
The expected physical layer mapping.
LUM-TCPhysicalLayerMappingTyper/w
Textual Convention: LUM-TCPhysicalLayerMappingType Enumeration
Type Values:
1dualFiber
2singleFiber
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.20
ifBasicSignalFacilityLoopback
The facility loopback setting. Rx is looped to Tx.
The purpose of facility loopback is to test
the line interface termination.

disabled - Facility loopback is not set. This is the
default setting.
…
LUM-TCEnabledDisabledWithNAr/w
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.21
ifBasicSignalFacilityLoopbackTimeout
Timeout for facility loopback to make sure
connection to node is not lost if ppp link is
broken. The unit is minutes.

Note! This attribute is not saved in backup,
meaning the loopback will be set to disab…
LUM-TCTime7200minNo0r/w
Textual Convention: LUM-TCTime7200minNo0 Integer32
Type Constraints:
range: 1..7200
range: 2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.22
ifBasicSignalFacilityLoopbackEnabled
Facility loopback is enabled.

alarm: Facility loopback is enabled.

ok: Facility loopback is disabled.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.23
ifBasicSignalTerminalLoopback
The terminal loopback setting. Tx is looped to Rx.
The purpose of a terminal loopback is to test
the path through the equipment (a cross-connect,
mux/demux stage, or similar) and execute the loop
close to the outgoing i…
LUM-TCEnabledDisabledWithNAr/w
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.24
ifBasicSignalTerminalLoopbackTimeout
Timeout for terminal loopback to make sure connection to
node is not lost if ppp link is broken. The unit is
minutes.

Note! This attribute is not saved in backup,
meaning the loopback will be set to disab…
LUM-TCTime7200minNo0r/w
Textual Convention: LUM-TCTime7200minNo0 Integer32
Type Constraints:
range: 1..7200
range: 2147483647
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.25
ifBasicSignalTerminalLoopbackEnabled
Terminal loopback is enabled.

alarm: Terminal loopback is enabled.

ok: Terminal loopback is disabled.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.26
ifBasicSignalConnectorType
The connector type.
LUM-TCConnectorType
Textual Convention: LUM-TCConnectorType Enumeration
Type Values:
1connector4x10Gb
2connector1x100Gb
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.46.2.4.1.1.27