ifBasicAdminAutoAlarmEnableReset
LUM-IFBASIC-MIB ·
.1.3.6.1.4.1.8708.2.46.2.3.1.1.11
Object
column
LUM-TCResetWithNA
When the attribute is set to reset the auto-alarm enable function
is re-initialised. Then the attribute is set to normal again
automatically.
reset - Re-initialises the auto-alarm enable function
normal - The auto-alarm enable function is in normal state
Context
- MIB
- LUM-IFBASIC-MIB
- OID
.1.3.6.1.4.1.8708.2.46.2.3.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifBasicAdminEntry
- Table
- ifBasicAdminTable
- Siblings
- 14
Values & Constraints
Type Values
1 | reset |
2 | normal |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifBasicAdminIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.46.2.3.1.1.1 |
| ifBasicAdminAutoAlarmEnableStatus The state of auto alarm enable for the interface.
suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed
suppressSignal - Only signal alarm… | column | LUM-TCAutoAlarmStatus | .1.3.6.1.4.1.8708.2.46.2.3.1.1.10 |
| ifBasicAdminInterfaceStatus The status of the traffic interface.
outOfService - No PM and no alarms.
autoInService - No PM and no alarms. Changes to 'inService' when OK.
inService -… | column | LUM-TCInterfaceStatus | .1.3.6.1.4.1.8708.2.46.2.3.1.1.12 |
| ifBasicAdminIfNo The physical interface number of the actual multi-connector port. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.13 |
| ifBasicAdminIfType Type of interface (Individual or bundled). | column | LUM-TCInterfaceType | .1.3.6.1.4.1.8708.2.46.2.3.1.1.14 |
| ifBasicAdminNotAvailableForUse Is the interface not available for use.
The interface may be created in order to show some
physical properties but may otherwise be unavailable
for service depending on setup and … | column | LUM-TCTruthValueWithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.15 |
| ifBasicAdminName The management name of the interface, for example
'admin:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numb… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.46.2.3.1.1.2 |
| ifBasicAdminDescr User configurable label. | column | LUM-TCDisplayStringWithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.3 |
| ifBasicAdminSubrack The subrack of the physical port that this interface is bound to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.4 |
| ifBasicAdminSlot The slot of the physical port that this interface is bound to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.5 |
| ifBasicAdminTxPort The transmitting physical port that this interface is bound to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.6 |
| ifBasicAdminRxPort The receiving physical port that this interface is bound to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.7 |
| ifBasicAdminAdminStatus The administrative state of the ifBasic interface.
down - The interface is de-activated.
service - The interface is activated but alarms
are suppress… | column | LUM-TCAdminStatusWithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.8 |
| ifBasicAdminOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults preven… | column | LUM-TCOperStatusWithNA | .1.3.6.1.4.1.8708.2.46.2.3.1.1.9 |