LUM-FC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

fcIfTable

table

.1.3.6.1.4.1.8708.2.22.2.2.1 · 1 row entry · 22 columns

Open in standard view

The interface list.

fcIfEntry entry .1.3.6.1.4.1.8708.2.22.2.2.1.1

An entry in the interface list.

Indexes

fcIfIndex

Column Syntax OID

fcIfIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.22.2.2.1.1.1

fcIfName

The management name of the interface, for example
'fc:1:2:1', where the first number indicates
sub-rack, the second slot number and the third
is the port number. Examples:

fc:s:s:p - Fiber channel client …

LUM-TCMgmtNameString

Textual Convention: LUM-TCMgmtNameString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.8708.2.22.2.2.1.1.2

fcIfDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.8708.2.22.2.2.1.1.3

fcIfSubrack

The number of the subrack where the interface
is located.

LUM-TCSubrackNumber

Textual Convention: LUM-TCSubrackNumber Unsigned32

Type Constraints:
range: 0..15

.1.3.6.1.4.1.8708.2.22.2.2.1.1.4

fcIfSlot

The number of the slot where the interface is
located.

LUM-TCSlotNumber

Textual Convention: LUM-TCSlotNumber Unsigned32

Type Constraints:
range: 0..22

.1.3.6.1.4.1.8708.2.22.2.2.1.1.5

fcIfTxPort

The number of the port where the TX-side of the
interface is located.

LUM-TCPortNumber

Textual Convention: LUM-TCPortNumber Unsigned32

Type Constraints:
range: 0..116

.1.3.6.1.4.1.8708.2.22.2.2.1.1.6

fcIfRxPort

The number of the port where the RX-side of the
interface is located.

LUM-TCPortNumber

Textual Convention: LUM-TCPortNumber Unsigned32

Type Constraints:
range: 0..116

.1.3.6.1.4.1.8708.2.22.2.2.1.1.7

fcIfInvPhysIndexOrZero

The row in the invPhysTable for this interface.
Set to 0 if not known.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.22.2.2.1.1.8

fcIfFormat

The expected signal format.

FcSignalFormat

Textual Convention: FcSignalFormat Enumeration

Type Values:

0	undefined
1	fc1Gb

.1.3.6.1.4.1.8708.2.22.2.2.1.1.9

fcIfHighSpeed

The expected signal bit rate in units of
1,000,000 bits (Mb) per second.

Unsigned32

Constraints:
range: 1000-2000

.1.3.6.1.4.1.8708.2.22.2.2.1.1.10

fcIfAdminStatus

The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…

LUM-TCBoardOrInterfaceAdminStatusr/w

Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration

Type Values:

1	down
2	service
3	up

.1.3.6.1.4.1.8708.2.22.2.2.1.1.11

fcIfOperStatus

The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-s…

LUM-TCBoardOrInterfaceOperStatus

Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration

Type Values:

1	notPresent
2	down
3	up

.1.3.6.1.4.1.8708.2.22.2.2.1.1.12

fcIfLaserStatus

The operational state of the laser.

off - The laser is turned off.

on - The laser is turned on.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.22.2.2.1.1.13

fcIfTxSignalStatus

The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…

Enumeration

Enumerated Values:

1	down
2	degraded
3	up

.1.3.6.1.4.1.8708.2.22.2.2.1.1.14

fcIfLossOfSignal

Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.

LUM-TCFaultStatus

Textual Convention: LUM-TCFaultStatus Enumeration

Type Values:

1	ok
2	alarm

.1.3.6.1.4.1.8708.2.22.2.2.1.1.15

fcIfLossOfSync

Loss of sync.

A: FC 'frame' can not be located.

D: FC 'frame' is located.

LUM-TCFaultStatus

Textual Convention: LUM-TCFaultStatus Enumeration

Type Values:

1	ok
2	alarm

.1.3.6.1.4.1.8708.2.22.2.2.1.1.16

fcIfAuAlarmIndicationSignalW2C

Alarm Indication Signal in the direction WDM
to Client.

A(ctivation): AIS detected in the WDM signal
for this channel.

D(e-activation): No AIS detected for this
channel.

LUM-TCFaultStatus

Textual Convention: LUM-TCFaultStatus Enumeration

Type Values:

1	ok
2	alarm

.1.3.6.1.4.1.8708.2.22.2.2.1.1.17

fcIfForwardAls

Forward Automatic Laser Shut-down. Decides the
behaviour of the client laser (W2C) when the
trunc signal is defected.

disabled - The laser is NOT turned off at failure.

enabled - The laser …

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.22.2.2.1.1.18

fcIfSuppressRemoteAlarms

Suppress AIS in the alarm list. The fault status
on the port object can, however, be seen.

disabled - alarms are not suppressed.

enabled - alarms are suppressed.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.22.2.2.1.1.19

fcIfFarEndLoopback

Loop the client TX signal back to the client RX.

disabled - the signal is not looped

enabled - the signal is looped.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.22.2.2.1.1.20

fcIfEntityId

Index in entity table.

-- Only used for notifications

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.22.2.2.1.1.21

fcIfObjectProperty

Property mask.

LUM-TCObjectProperty

Textual Convention: LUM-TCObjectProperty Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.22.2.2.1.1.22