fcIfAuAlarmIndicationSignalW2C

LUM-FC-MIB · .1.3.6.1.4.1.8708.2.22.2.2.1.1.17
MIB view Table view

Object

column LUM-TCFaultStatus 
Alarm Indication Signal in the direction WDM
to Client.
              
A(ctivation): AIS detected in the WDM signal
for this channel.
              
D(e-activation): No AIS detected for this
channel.

Context

MIB
LUM-FC-MIB
OID
.1.3.6.1.4.1.8708.2.22.2.2.1.1.17
Type
column
Access
readonly
Status
current
Parent
fcIfEntry
Table
fcIfTable
Siblings
21

Syntax

LUM-TCFaultStatus
Source
LUM-TCFaultStatus
Base type
Enumeration

Values & Constraints

Type Values
1ok
2alarm

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fcIfIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.22.2.2.1.1.1
fcIfHighSpeed
The expected signal bit rate in units of 1,000,000 bits (Mb) per second.
columnUnsigned32.1.3.6.1.4.1.8708.2.22.2.2.1.1.10
fcIfAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.22.2.2.1.1.11
fcIfOperStatus
The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are fault…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.22.2.2.1.1.12
fcIfLaserStatus
The operational state of the laser. off - The laser is turned off. on - The laser is turned on.
columnEnumeration.1.3.6.1.4.1.8708.2.22.2.2.1.1.13
fcIfTxSignalStatus
The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The s…
columnEnumeration.1.3.6.1.4.1.8708.2.22.2.2.1.1.14
fcIfLossOfSignal
Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW ind…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.22.2.2.1.1.15
fcIfLossOfSync
Loss of sync. A: FC 'frame' can not be located. D: FC 'frame' is located.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.22.2.2.1.1.16
fcIfForwardAls
Forward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at fail…
columnEnumeration.1.3.6.1.4.1.8708.2.22.2.2.1.1.18
fcIfSuppressRemoteAlarms
Suppress AIS in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are…
columnEnumeration.1.3.6.1.4.1.8708.2.22.2.2.1.1.19
fcIfName
The management name of the interface, for example 'fc:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: …
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.22.2.2.1.1.2
fcIfFarEndLoopback
Loop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped.
columnEnumeration.1.3.6.1.4.1.8708.2.22.2.2.1.1.20
fcIfEntityId
Index in entity table. -- Only used for notifications
columnUnsigned32.1.3.6.1.4.1.8708.2.22.2.2.1.1.21
fcIfObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.22.2.2.1.1.22
fcIfDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.22.2.2.1.1.3
fcIfSubrack
The number of the subrack where the interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.22.2.2.1.1.4
fcIfSlot
The number of the slot where the interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.22.2.2.1.1.5
fcIfTxPort
The number of the port where the TX-side of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.22.2.2.1.1.6
fcIfRxPort
The number of the port where the RX-side of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.22.2.2.1.1.7
fcIfInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.22.2.2.1.1.8
fcIfFormat
The expected signal format.
columnFcSignalFormat.1.3.6.1.4.1.8708.2.22.2.2.1.1.9