fcIfEntityId
LUM-FC-MIB ·
.1.3.6.1.4.1.8708.2.22.2.2.1.1.21
Object
column
Unsigned32
Index in entity table.
-- Only used for notifications
Context
- MIB
- LUM-FC-MIB
- OID
.1.3.6.1.4.1.8708.2.22.2.2.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fcIfEntry
- Table
- fcIfTable
- Siblings
- 21
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcIfIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.22.2.2.1.1.1 |
| fcIfHighSpeed The expected signal bit rate in units of
1,000,000 bits (Mb) per second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.22.2.2.1.1.10 |
| fcIfAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.22.2.2.1.1.11 |
| fcIfOperStatus The operational state for the interface.
notPresent - The physical resources are not
available.
down - The interface is de-activated or the are
fault… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.22.2.2.1.1.12 |
| fcIfLaserStatus The operational state of the laser.
off - The laser is turned off.
on - The laser is turned on. | column | Enumeration | .1.3.6.1.4.1.8708.2.22.2.2.1.1.13 |
| fcIfTxSignalStatus The operational state for outgoing (TX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.22.2.2.1.1.14 |
| fcIfLossOfSignal Loss of signal.
Applicable for all signal formats.
A(ctivation): Active loss of signal HW
indication.
D(e-activation): Inactive loss of signal HW
ind… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.22.2.2.1.1.15 |
| fcIfLossOfSync Loss of sync.
A: FC 'frame' can not be located.
D: FC 'frame' is located. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.22.2.2.1.1.16 |
| fcIfAuAlarmIndicationSignalW2C Alarm Indication Signal in the direction WDM
to Client.
A(ctivation): AIS detected in the WDM signal
for this channel.
D(e-activation): No AIS detect… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.22.2.2.1.1.17 |
| fcIfForwardAls Forward Automatic Laser Shut-down. Decides the
behaviour of the client laser (W2C) when the
trunc signal is defected.
disabled - The laser is NOT turned off at fail… | column | Enumeration | .1.3.6.1.4.1.8708.2.22.2.2.1.1.18 |
| fcIfSuppressRemoteAlarms Suppress AIS in the alarm list. The fault status
on the port object can, however, be seen.
disabled - alarms are not suppressed.
enabled - alarms are… | column | Enumeration | .1.3.6.1.4.1.8708.2.22.2.2.1.1.19 |
| fcIfName The management name of the interface, for example
'fc:1:2:1', where the first number indicates
sub-rack, the second slot number and the third
is the port number. Examples:
… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.22.2.2.1.1.2 |
| fcIfFarEndLoopback Loop the client TX signal back to the client RX.
disabled - the signal is not looped
enabled - the signal is looped. | column | Enumeration | .1.3.6.1.4.1.8708.2.22.2.2.1.1.20 |
| fcIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.22.2.2.1.1.22 |
| fcIfDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.22.2.2.1.1.3 |
| fcIfSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.22.2.2.1.1.4 |
| fcIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.22.2.2.1.1.5 |
| fcIfTxPort The number of the port where the TX-side of the
interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.22.2.2.1.1.6 |
| fcIfRxPort The number of the port where the RX-side of the
interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.22.2.2.1.1.7 |
| fcIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.22.2.2.1.1.8 |
| fcIfFormat The expected signal format. | column | FcSignalFormat | .1.3.6.1.4.1.8708.2.22.2.2.1.1.9 |