LIEBERT-GP-ENVIRONMENTAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

lgpEnvTemperatureTableDegF

table

.1.3.6.1.4.1.476.1.42.3.4.1.2.3 · 1 row entry · 21 columns

Open in standard view

A list of temperature table entries.  The table contains zero, one,
or many rows, depending upon the number of temperature objects
available.  The NMS cannot create or delete rows from the table. The
rows are created by the agent based upon the capabilities of the
managed device.  The entries in this table are cloned in
'lgpEnvTemperatureTableDegC' where Fahrenheit values are converted to
Celsius.

lgpEnvTemperatureEntryDegF entry .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1

This entry defines the contents of the rows for the table
'lgpEnvTemperatureTableDegF'.

Indexes

lgpEnvTemperatureIdDegF

Column	Syntax	OID
lgpEnvTemperatureIdDegF This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegF'.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.1`
lgpEnvTemperatureDescrDegF A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature.	ObjectIdentifier	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.2`
lgpEnvTemperatureMeasurementDegF The measured temperature value.	degrees FahrenheitSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3`
lgpEnvTemperatureHighThresholdDegF The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.	degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.4`
lgpEnvTemperatureLowThresholdDegF The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.	degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.5`
lgpEnvTemperatureSetPointDegF The temperature setting for the well known 'lgpEnvTemperatureDescrDegF' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting b…	degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.6`
lgpEnvTemperatureDailyHighDegF The daily high temperature measurement.	degrees FahrenheitSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.7`
lgpEnvTemperatureDailyLowDegF The daily low temperature measurement.	degrees FahrenheitSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.8`
lgpEnvTempDailyHighTimeHourDegF The hours digit of the time corresponding to the daily high temperature measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.9`
lgpEnvTempDailyHighTimeMinuteDegF The minutes digit of the time corresponding to the daily high temperature measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.10`
lgpEnvTempDailyHighTimeSecondDegF The seconds digit of the time corresponding to the daily high temperature measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.11`
lgpEnvTempDailyLowTimeHourDegF The hours digit of the time corresponding to the daily low temperature measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.12`
lgpEnvTempDailyLowTimeMinuteDegF The minutes digit of the time corresponding to the daily low temperature measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.13`
lgpEnvTempDailyLowTimeSecondDegF The seconds digit of the time corresponding to the daily low temperature measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.14`
lgpEnvTemperatureMeasurementTenthsDegF The measured temperature value.	.1 degrees FahrenheitSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.50`
lgpEnvTemperatureHighThresholdTenthsDegF The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a notification.	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.51`
lgpEnvTemperatureLowThresholdTenthsDegF The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a notification.	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.52`
lgpEnvTemperatureSetPointTenthsDegF The temperature setting for the well known 'lgpEnvTemperatureDescrDegF' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting b…	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.53`
lgpEnvTemperatureDeadBandTenthsDegF The deadband region around the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where no heating or cooling will occur.	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.60`
lgpEnvTempHeatingPropBandTenthsDegF The proportional region below the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where heating will be proportionally controlled.	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.61`
lgpEnvTempCoolingPropBandTenthsDegF The proportional region above the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where cooling will be proportionally controlled.	.1 degrees FahrenheitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.62`

lgpEnvTemperatureTableDegC

table

.1.3.6.1.4.1.476.1.42.3.4.1.3.3 · 1 row entry · 21 columns

Open in standard view

A list of temperature table entries.  The table contains zero, one,
or many rows, depending upon the number of temperature objects
available.  The NMS cannot create or delete rows from the table. The
rows are created by the agent based upon the capabilities of the
managed device.  The entries in this table are cloned in
'lgpEnvTemperatureTableDegF' where Celsius values are converted to
Fahrenheit.

lgpEnvTemperatureEntryDegC entry .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1

This entry defines the contents of the rows for the table
'lgpEnvTemperatureTableDegC'.

Indexes

lgpEnvTemperatureIdDegC

Column	Syntax	OID
lgpEnvTemperatureIdDegC This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegC'.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.1`
lgpEnvTemperatureDescrDegC A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature.	ObjectIdentifier	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.2`
lgpEnvTemperatureMeasurementDegC The measured temperature value.	degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.3`
lgpEnvTemperatureHighThresholdDegC The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.	degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.4`
lgpEnvTemperatureLowThresholdDegC The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.	degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.5`
lgpEnvTemperatureSetPointDegC The temperature setting for the well known 'lgpEnvTemperatureDescrDegC' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting b…	degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.6`
lgpEnvTemperatureDailyHighDegC The daily high temperature measurement.	degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.7`
lgpEnvTemperatureDailyLowDegC The daily low temperature measurement.	degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.8`
lgpEnvTempDailyHighTimeHourDegC The hours digit of the time corresponding to the daily high temperature measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.9`
lgpEnvTempDailyHighTimeMinuteDegC The minutes digit of the time corresponding to the daily high temperature measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.10`
lgpEnvTempDailyHighTimeSecondDegC The seconds digit of the time corresponding to the daily high temperature measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.11`
lgpEnvTempDailyLowTimeHourDegC The hours digit of the time corresponding to the daily low temperature measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.12`
lgpEnvTempDailyLowTimeMinuteDegC The minutes digit of the time corresponding to the daily low temperature measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.13`
lgpEnvTempDailyLowTimeSecondDegC The seconds digit of the time corresponding to the daily low temperature measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.14`
lgpEnvTemperatureMeasurementTenthsDegC The measured temperature value.	.1 degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.50`
lgpEnvTemperatureHighThresholdTenthsDegC The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a notification.	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.51`
lgpEnvTemperatureLowThresholdTenthsDegC The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a notification.	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.52`
lgpEnvTemperatureSetPointTenthsDegC The temperature setting for the well known 'lgpEnvTemperatureDescrDegC' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting b…	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.53`
lgpEnvTemperatureDeadBandTenthsDegC The deadband region around the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where no heating or cooling will occur.	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.60`
lgpEnvTempHeatingPropBandTenthsDegC The proportional region below the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where heating will be proportionally controlled.	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.61`
lgpEnvTempCoolingPropBandTenthsDegC The proportional region above the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where cooling will be proportionally controlled.	.1 degrees CelsiusSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.62`

lgpEnvHumidityTableRel

table

.1.3.6.1.4.1.476.1.42.3.4.2.2.3 · 1 row entry · 20 columns

Open in standard view

A list of humidity table entries. The table contains zero, one,
or many rows, depending upon the number of humidity objects available.
The NMS cannot create or delete rows from the table. The rows are
created by the agent based upon the capabilities of the managed device.

lgpEnvHumidityEntryRel entry .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1

This entry defines the contents of the rows for the table
'lgpEnvHumidityTableRel'.

Indexes

lgpEnvHumidityIdRel

Column	Syntax	OID
lgpEnvHumidityIdRel This OID is used as an index to identify a row in the table 'lgpEnvHumidityTableRel'.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.1`
lgpEnvHumidityDescrRel A reference to a humidity description object. The object referenced should not be accessible, but rather be used to provide a unique description of the humidity.	ObjectIdentifier	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.2`
lgpEnvHumidityMeasurementRel The measured humidity value.	percent Relative HumiditySNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.3`
lgpEnvHumidityHighThresholdRel The high humidity notification threshold. This is the maximum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.4`
lgpEnvHumidityLowThresholdRel The low humidity notification threshold. This is the minimum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.5`
lgpEnvHumiditySetPoint The humidity setting used to control the well known humidity object 'lgpEnvHumidityDescrRel'. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the co…	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.6`
lgpEnvHumidityDailyHigh The daily high relative humidity measurement.	percent Relative HumiditySNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.7`
lgpEnvHumidityDailyLow The daily low relative humidity measurement.	percent Relative HumiditySNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.8`
lgpEnvHumidityDailyHighTimeHour The hours digit of the time corresponding to the daily high humidity measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.9`
lgpEnvHumidityDailyHighTimeMinute The minutes digit of the time corresponding to the daily high humidity measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.10`
lgpEnvHumidityDailyHighTimeSecond The seconds digit of the time corresponding to the daily high humidity measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.11`
lgpEnvHumidityDailyLowTimeHour The hours digit of the time corresponding to the daily low humidity measurement.	hoursInteger32 Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.12`
lgpEnvHumidityDailyLowTimeMinute The minutes digit of the time corresponding to the daily low humidity measurement.	minutesInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.13`
lgpEnvHumidityDailyLowTimeSecond The seconds digit of the time corresponding to the daily low humidity measurement.	secondsInteger32 Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.14`
lgpEnvHumidityDeadBand The deadband region around the setpoint value (lgpEnvHumiditySetPoint) where no humidifying or dehumidifying will occur.	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.15`
lgpEnvHumidifyPropBand The proportional region below the setpoint value (lgpEnvHumiditySetPoint) where humidifying will be proportionally controlled.	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.16`
lgpEnvDehumidifyPropBand The proportional region above the setpoint value (lgpEnvHumiditySetPoint) where dehumidifying will be proportionally controlled.	percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.17`
lgpEnvHumidityMeasurementRelTenths The measured humidity value.	.1 percent Relative HumiditySNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.50`
lgpEnvHumidityHighThresholdRelTenths The high humidity notification threshold. This is the maximum value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a notification.	.1 percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.51`
lgpEnvHumidityLowThresholdRelTenths The low humidity notification threshold. This is the minimum value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a notification.	.1 percent Relative HumiditySNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.52`

lgpEnvComponentStateTable

table

.1.3.6.1.4.1.476.1.42.3.4.3.50 · 1 row entry · 3 columns

Open in standard view

This table contains a list of the units components that have
a state associated with them.
The table contains zero, one, or more rows, depending
upon the number of components associated with the unit.
The NMS cannot create or delete rows in the table. The rows are
created by the agent based upon the capabilities of the units
being monitored.

lgpEnvComponentStateEntry entry .1.3.6.1.4.1.476.1.42.3.4.3.50.1

This entry defines the attributes to be populated in the
various columns of the 'lgpEnvComponentStateTable'.

Indexes

lgpEnvComponentStateIndex

Column Syntax OID

lgpEnvComponentStateIndex

This is the index indicating the nth element of the table.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.3.50.1.1

lgpEnvComponentStateDescr

A reference to a component description object. The object
referenced should not be accessible, but rather be used
to provide a unique description of the component being
described in the row of the table.

ObjectIdentifier

.1.3.6.1.4.1.476.1.42.3.4.3.50.1.2

lgpEnvComponentState

not-specified
The state of the component is unknown.
on
The component is on.
off
The component is off.

Enumeration

Enumerated Values:

0	not-specified
1	on
2	off

.1.3.6.1.4.1.476.1.42.3.4.3.50.1.3

lgpEnvValveTable

table

.1.3.6.1.4.1.476.1.42.3.4.3.70 · 1 row entry · 4 columns

Open in standard view

This table contains a list of the unit valves that have
information associated with them.
The table contains zero, one, or more rows, depending
upon the number of valves associated with the unit.
The NMS cannot create or delete rows in the table. The rows are
created by the agent based upon the capabilities of the units
being monitored.

lgpEnvValveEntry entry .1.3.6.1.4.1.476.1.42.3.4.3.70.1

This entry defines the attributes to be populated in the
various columns of the 'lgpEnvValveTable'.

Indexes

lgpEnvValveIndex

Column Syntax OID

lgpEnvValveIndex

This is the index indicating the nth element of the table.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.3.70.1.1

lgpEnvValveDescr

A reference to a valve description object. The object
referenced should not be accessible, but rather be used
to provide a unique description of the valve being
described in the row of the table.

ObjectIdentifier

.1.3.6.1.4.1.476.1.42.3.4.3.70.1.2

lgpEnvValveState

not-specified
The state of the component is unknown.
open
The valve is open.
off
The valve is closed.

Enumeration

Enumerated Values:

0	not-specified
1	open
2	closed

.1.3.6.1.4.1.476.1.42.3.4.3.70.1.3

lgpEnvValvePositionTenths

This gives a value describing the position of the valve.

.1 percentSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.3.70.1.20

lgpEnvOperationalTimeTable

table

.1.3.6.1.4.1.476.1.42.3.4.4.32 · 1 row entry · 6 columns

Open in standard view

A list of environmental operational time ranges for a given
environmental unit.  The entries in this table may be duplicated from
values in the 'lgpEnvStatistics' group.
          
This table contains zero, one, or many rows, depending upon the number
of 'lgpEnvOperationTimePoint' and 'lgpEnvOperationTimeSubID' available
in the table.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpEnvOperationalTimeEntry entry .1.3.6.1.4.1.476.1.42.3.4.4.32.1

This entry defines the contents of the columns for the table
'lgpEnvOperationalTimeTable'.

Indexes

lgpEnvOperationTimeIndex

Column	Syntax	OID
lgpEnvOperationTimeIndex This is the index indicating the nth element of the table.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.1`
lgpEnvOperationTimePoint An OID representing a well known operation point. These object identifiers can indicate a point, location, or mode of an operation for which a measurement is recorded. The OID's name usually implies a location of the m…	ObjectIdentifier	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.2`
lgpEnvOperationTimeSubID This is a sub identifier for the 'lgpEnvOperationPoint'. It indicates the instance number of the well known operation point. For example, a system could have two fans installed. This variable would identify fan 1 with …	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.3`
lgpEnvOperationTimeUnit An OID representing a well known operation time unit type. These object identifiers indicate the units of the operation time. The OID's name usually implies a measurement type such as 'lgpEnvHours', etc.	ObjectIdentifier	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.4`
lgpEnvOperationTimeValue The actual operation time value of the 'lgpEnvOperationTimePoint'. If multiple operation times are available for a 'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID' will differentiate between them.	hoursSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.5`
lgpEnvOperationTimeHighWarning The high warning time of the operation designated by the 'lgpEnvOperationTimePoint'. If operation times are available at a single 'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID' will differentiate between the…	hoursSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.4.32.1.6`

lgpEnvSleepIntervalTimeTable

table

.1.3.6.1.4.1.476.1.42.3.4.5.3 · 1 row entry · 6 columns

Open in standard view

A sleep time interval table containing a list of the start and stop
times to be used to take a device online or offline.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpEnvSleepIntervalTimeEntry entry .1.3.6.1.4.1.476.1.42.3.4.5.3.1

This entry defines the contents of the columns for the table
'lgpEnvSleepIntervalTimeTable'.

Indexes

lgpEnvSleepTimeIndex

Column	Syntax	OID
lgpEnvSleepTimeIndex This is the index indicating the row of the table 'lgpEnvSleepIntervalTimeTable'.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.1`
lgpEnvSleepTimeSubID This is a sub identifier for each 'lgpEnvSleepIntervalTimeEntry'. It indicates the instance number of the 'lgpEnvSleepIntervalTimeEntry'. For example, a system could have two sleep intervals and the first interval's sub…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.2`
lgpEnvSleepTimeStartHour This is the hours digit of the time when the system will be put online.	hourInteger32r/w Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.3`
lgpEnvSleepTimeStartMinute This is the minutes digit of the time when the system will be put online.	minuteInteger32r/w Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.4`
lgpEnvSleepTimeStopHour This is the hours digit containing the time when the system will be taken offline.	hourInteger32r/w Constraints: `range: 0-23`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.5`
lgpEnvSleepTimeStopMinute This is the minutes digit containing the time when the system will be taken offline.	minuteInteger32r/w Constraints: `range: 0-59`	`.1.3.6.1.4.1.476.1.42.3.4.5.3.1.6`

lgpEnvSleepDayTable

table

.1.3.6.1.4.1.476.1.42.3.4.5.4 · 1 row entry · 3 columns

Open in standard view

A sleep table containing a list of the days of the week the system
will be offline.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpEnvSleepDayEntry entry .1.3.6.1.4.1.476.1.42.3.4.5.4.1

This entry defines the contents of the columns for the table
'lgpEnvSleepDayTable'.

Indexes

lgpEnvSleepDayIndex

Column Syntax OID

lgpEnvSleepDayIndex

This is the index indicating the row of the table
'lgpEnvSleepDayTable'.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.5.4.1.1

lgpEnvSleepDay

This is a sub identifier for the day of the week within
'lgpEnvSleepDayTable'.

Enumeration

Enumerated Values:

1	sunday
2	monday
3	tuesday
4	wednesday
5	thursday
6	friday
7	saturday

.1.3.6.1.4.1.476.1.42.3.4.5.4.1.2

lgpEnvSleepAllDayEnabled

The all day sleep functionality has been enabled for the
corresponding 'lgpEnvSleepDay' in the 'lgpEnvSleepDayTable'.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.476.1.42.3.4.5.4.1.3

lgpEnvRemoteSensorTable

table

.1.3.6.1.4.1.476.1.42.3.4.9.10 · 1 row entry · 6 columns

Open in standard view

This table contains a list of remote sensors attached to the
environmental unit. The table contains zero, one, or more rows,
depending upon the number of sensors attached to the unit.

lgpEnvRemoteSensorEntry entry .1.3.6.1.4.1.476.1.42.3.4.9.10.1

This entry defines the attributes to be populated in the
various columns of the 'lgpEnvRemoteSensorTable'.

Indexes

lgpEnvRemoteSensorIndex

Column Syntax OID

lgpEnvRemoteSensorIndex

This is the index indicating the nth element of the table.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.1

lgpEnvRemoteSensorId

This is the sensor number identifying the sensor.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.2

lgpEnvRemoteSensorMode

Function assigned to remote sensor. When set to control(2) the
sensor will be used in calculation of remote sensor temperature which
may be used for heating and cooling control. When set to disable(0)
the remote senso…

Enumerationr/w

Enumerated Values:

0	disable
1	reference
2	control

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.3

lgpEnvRemoteSensorUsrLabel

User assigned remote sensor label.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.4

lgpEnvRemoteSensorTempMeasurementDegF

Temperature measured at the temperature sensor reported in
degrees Fahrenheit.

degrees FahrenheitSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.5

lgpEnvRemoteSensorTempMeasurementDegC

Temperature measured at the temperature sensor reported in
degrees Celsius.

degrees CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.476.1.42.3.4.9.10.1.6