Juniper-PPP-PROFILE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
35

juniPppProfileTable

table
.1.3.6.1.4.1.4874.2.2.45.1.1.1 · 1 row entry · 30 columns
Open in standard view 
This table contains profiles for configuring PPP interfaces.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniPppProfileEntry entry .1.3.6.1.4.1.4874.2.2.45.1.1.1.1
A profile describing configuration of a PPP interface.
Indexes
juniPppProfileId
Column Syntax OID
juniPppProfileId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
Juniper-PROFILE-MIB.juniProfileNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1
juniPppProfileSetMap
A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.

The INDEX object(s) and this object are excl…
Juniper-TCJuniSetMapr/w
Textual Convention: Juniper-TCJuniSetMap OctetString
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2
juniPppProfileLcpMagicNumber
If true(2) then the local node will attempt to perform Magic Number
negotiation with the remote node. If false(1) then this negotiation is
not performed. In any event, the local node will comply with any magic
number …
Enumerationr/w
Enumerated Values:
1false
2true
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3
juniPppProfileLcpKeepalive
Keepalive interval in seconds. A value of zero disables keepalive.
Keepalive is performed using LCP Echo.
secondsInteger32r/w
Constraints:
range: 0-0
range: 30-64800
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4
juniPppProfileLcpAuthentication deprecated
Specifies the type(s) of authentication, if any, to be negotiated with
the peer:
none No authentication is negotiated.
pap PAP negotiation only.
chap CHAP negotiation only.
papChap PAP negotiat…
Juniper-PPP-MIBJuniPppAuthenticationr/w .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5
juniPppProfileIpPeerDnsPriority
When enabled, allows peer's DNS address to prevail in the event of a
negotiation conflict; when disabled, the local PPP interface's DNS
address prevails.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6
juniPppProfileIpPeerWinsPriority
When enabled, allows peer's WINS address to prevail in the event of a
negotiation conflict; when disabled, the local PPP interface's WINS
address prevails.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7
juniPppProfileLcpInitialMRU
The initial Maximum Receive Unit (MRU) that the local PPP entity will
advertise to the remote entity.

If the value of this variable is 1 then the local PPP entity will
advertise an MRU value determined by…
Integer32r/w
Constraints:
range: 1-1
range: 64-65535
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8
juniPppProfilePacketLog
When enabled, allows packet logging on dynamic PPP interfaces.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9
juniPppProfileStateLog
When enabled, allows state machine logging on dynamic PPP interfaces.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10
juniPppProfileChapMinChallengeLength
Minimum value of the CHAP authenticator challenge length value. This
value is never allowed to be set to a value greater than
juniPppProfileChapMaxChallengeLength.
Integer32r/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11
juniPppProfileChapMaxChallengeLength
Maximum value of the CHAP authenticator challenge length value. This
value is never allowed to be set to a value less than
juniPppLinkConfigChapMinChallengeLength.
Integer32r/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12
juniPppProfilePassiveMode
When enabled, LCP state machine is forced into passive mode on lower
layer UP message. It adds compatibility with slow and buggy clients.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13
juniPppProfileMlppp
Enables the creation of dynamic multi-link PPP interfaces.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14
juniPppProfileIpcpNetmask
Enables the negotiation of the IPCP option netmask (0x90) during IPCP
negotiation.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15
juniPppProfileAuthenticatorVirtualRouter
The name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to
be used for authentication on the PPP interface. Setting this object
statically binds the authenticating virtual router with the PPP
interface. If …
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16
juniPppProfileAaaProfile
The name of the AAA profile to be used for authentication on the PPP
interface. Setting this object statically binds the aaa profile with
the PPP interface. If this object is not explicitly set or it is set to
null st…
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17
juniPppProfileInitiateIp
If enabled, PPP interface will initiate negotiation of IPCP;
if disabled, PPP interface will rely on remote PPP client to
initiate negotiation of IPCP.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18
juniPppProfileInitiateIpv6
If enabled, PPP interface will initiate negotiation of IPv6CP;
if disabled, PPP interface will rely on remote PPP client to
initiate negotiation of IPv6CP.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19
juniPppProfileFragmentation
Enables MLPPP fragmentation.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20
juniPppProfileReassembly
Enables MLPPP reassembly.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21
juniPppProfileMaxReceiveReconstructedUnit
The Maximum Received Reconstructed Unit (MRRU) that the local PPP
entity will advertise to the remote entity. If the value of this
variable is 1, then the MRRU is set to the local MRU value.
Integer32r/w
Constraints:
range: 1-1
range: 64-65535
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22
juniPppProfileFragmentSize
The size of fragments transmitted by the local PPP entity. If the
value of this variable is 1, then the fragment size is set to the link's
MTU value.
Integer32r/w
Constraints:
range: 1-1
range: 128-65535
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23
juniPppProfileHashLinkSelection
Enables MLPPP hash-based link selection for non-best-effort data.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24
juniPppProfileLcpAuthentication2
A configuration variable comprised of nibbles i.e. 4 bits, such that
a client can supply a list of 0 to 8 selections. The least
significant nibble is the first value of the list, and the most
significant nibble is t…
Juniper-TCJuniNibbleConfigr/w
Textual Convention: Juniper-TCJuniNibbleConfig Integer32
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25
juniPppProfileIgnoreMagicNumberMismatch
The ignore magic number mismatch option of the PPP interface
determines the action to be taken, when the peer has not negotiated
any value yet sent null or invalid magic number in the LCP echo
packets. The two actions…
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26
juniPppProfileIpcpPromptDnsOption
Control prompting of IPCP options to remote peer.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27
juniPppProfileIpcpLockout
The lockout option for IPCP determines whether IPCP can be negotiated
when the interface is already running IPV6CP. On enabling this option,
the negotiation will be blocked after the IPV6CP service is up and
waited for …
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28
juniPppProfileMultilinkMulticlass
Enables Multiclass Multilink PPP (MCML). Changing this object has an
effect when the link is next restarted.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29
juniPppProfileMultilinkMaxMultiClasses
Maximum number of MCML classes to be negotiated. Changing this object
has an effect when the link is next restarted.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30

juniPppProfileMulticlassTraffiClassTable

table
.1.3.6.1.4.1.4874.2.2.45.1.1.2 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for MLPPP Multiclass to traffic class
mapping of the profile present in the system.
juniPppProfileMulticlassTrafficClassEntry entry .1.3.6.1.4.1.4874.2.2.45.1.1.2.1
Each entry describes the MLPPP multiclass to traffic class mapping of
profiles.Other characteristics like fragmentation and reassembly
for a particular traffic class can be configured.
Indexes
juniPppProfileId juniPppProfileMulticlassIndex
Column Syntax OID
juniPppProfileMulticlassId
The index of the profile. When creating entries in this
table, suitable values for this object are determined by reading
juniPppProfileId.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.1
juniPppProfileMulticlassIndex
The multiclass index of a particular traffic class type. This can be
configured only when MCMP is enabled in the profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.2
juniPppProfileMulticlassTcName
The traffic class index mapped to the MCMP multiclass index. This can be
configured only when MCMP is enabled in the profile.
JuniPppProfileMulticlassTcNamer/w
Textual Convention: JuniPppProfileMulticlassTcName OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.3
juniPppProfileMulticlassFragmentation
Enable or disable fragmentation for a particular multiclass. This can be
configured only when MCMP is enaled in the profile.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.4
juniPppProfileMulticlassReassembly
Enable or disable rassembly for a particular multiclass. This can be
configured only when MCMP is enaled in the profile.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.5