juniPppProfileLcpInitialMRU
Juniper-PPP-PROFILE-MIB ·
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8
Object
column
r/w
Integer32
The initial Maximum Receive Unit (MRU) that the local PPP entity will
advertise to the remote entity.
If the value of this variable is 1 then the local PPP entity will
advertise an MRU value determined by its underlying media interface.
Context
- MIB
- Juniper-PPP-PROFILE-MIB
- OID
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniPppProfileEntry
- Table
- juniPppProfileTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-1
range: 64-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniPppProfileId The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
Juniper-PROFILE-MIB.juniProfileNameTa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1 |
| juniPppProfileStateLog When enabled, allows state machine logging on dynamic PPP interfaces. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10 |
| juniPppProfileChapMinChallengeLength Minimum value of the CHAP authenticator challenge length value. This
value is never allowed to be set to a value greater than
juniPppProfileChapMaxChallengeLength. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11 |
| juniPppProfileChapMaxChallengeLength Maximum value of the CHAP authenticator challenge length value. This
value is never allowed to be set to a value less than
juniPppLinkConfigChapMinChallengeLength. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12 |
| juniPppProfilePassiveMode When enabled, LCP state machine is forced into passive mode on lower
layer UP message. It adds compatibility with slow and buggy clients. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13 |
| juniPppProfileMlppp Enables the creation of dynamic multi-link PPP interfaces. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14 |
| juniPppProfileIpcpNetmask Enables the negotiation of the IPCP option netmask (0x90) during IPCP
negotiation. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15 |
| juniPppProfileAuthenticatorVirtualRouter The name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to
be used for authentication on the PPP interface. Setting this object
statically binds the authenticating vir… | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16 |
| juniPppProfileAaaProfile The name of the AAA profile to be used for authentication on the PPP
interface. Setting this object statically binds the aaa profile with
the PPP interface. If this object is no… | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17 |
| juniPppProfileInitiateIp If enabled, PPP interface will initiate negotiation of IPCP;
if disabled, PPP interface will rely on remote PPP client to
initiate negotiation of IPCP. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18 |
| juniPppProfileInitiateIpv6 If enabled, PPP interface will initiate negotiation of IPv6CP;
if disabled, PPP interface will rely on remote PPP client to
initiate negotiation of IPv6CP. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19 |
| juniPppProfileSetMap A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The … | column | Juniper-TCJuniSetMap | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2 |
| juniPppProfileFragmentation Enables MLPPP fragmentation. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20 |
| juniPppProfileReassembly Enables MLPPP reassembly. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21 |
| juniPppProfileMaxReceiveReconstructedUnit The Maximum Received Reconstructed Unit (MRRU) that the local PPP
entity will advertise to the remote entity. If the value of this
variable is 1, then the MRRU is set to the loca… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22 |
| juniPppProfileFragmentSize The size of fragments transmitted by the local PPP entity. If the
value of this variable is 1, then the fragment size is set to the link's
MTU value. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23 |
| juniPppProfileHashLinkSelection Enables MLPPP hash-based link selection for non-best-effort data. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24 |
| juniPppProfileLcpAuthentication2 A configuration variable comprised of nibbles i.e. 4 bits, such that
a client can supply a list of 0 to 8 selections. The least
significant nibble is the first value of the lis… | column | Juniper-TCJuniNibbleConfig | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25 |
| juniPppProfileIgnoreMagicNumberMismatch The ignore magic number mismatch option of the PPP interface
determines the action to be taken, when the peer has not negotiated
any value yet sent null or invalid magic number i… | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26 |
| juniPppProfileIpcpPromptDnsOption Control prompting of IPCP options to remote peer. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27 |
| juniPppProfileIpcpLockout The lockout option for IPCP determines whether IPCP can be negotiated
when the interface is already running IPV6CP. On enabling this option,
the negotiation will be blocked after … | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28 |
| juniPppProfileMultilinkMulticlass Enables Multiclass Multilink PPP (MCML). Changing this object has an
effect when the link is next restarted. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29 |
| juniPppProfileLcpMagicNumber If true(2) then the local node will attempt to perform Magic Number
negotiation with the remote node. If false(1) then this negotiation is
not performed. In any event, the local… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3 |
| juniPppProfileMultilinkMaxMultiClasses Maximum number of MCML classes to be negotiated. Changing this object
has an effect when the link is next restarted. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30 |
| juniPppProfileLcpKeepalive Keepalive interval in seconds. A value of zero disables keepalive.
Keepalive is performed using LCP Echo. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4 |
| juniPppProfileLcpAuthentication deprecated Specifies the type(s) of authentication, if any, to be negotiated with
the peer:
none No authentication is negotiated.
pap PAP negotiation only.
chap CHAP ne… | column | Juniper-PPP-MIBJuniPppAuthentication | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5 |
| juniPppProfileIpPeerDnsPriority When enabled, allows peer's DNS address to prevail in the event of a
negotiation conflict; when disabled, the local PPP interface's DNS
address prevails. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6 |
| juniPppProfileIpPeerWinsPriority When enabled, allows peer's WINS address to prevail in the event of a
negotiation conflict; when disabled, the local PPP interface's WINS
address prevails. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7 |
| juniPppProfilePacketLog When enabled, allows packet logging on dynamic PPP interfaces. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9 |