Juniper-ATM-1483-Profile-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
27

juniAtm1483ProfileTable

table
.1.3.6.1.4.1.4874.2.2.58.1.1.1 · 1 row entry · 12 columns
Open in standard view 
This table contains profiles for configuring bulk ATM circuits.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniAtm1483ProfileEntry entry .1.3.6.1.4.1.4874.2.2.58.1.1.1.1
A profile describing VCC configuration of an ATM subinterface.
Indexes
juniAtm1483ProfileId
Column Syntax OID
juniAtm1483ProfileId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.1
juniAtm1483ProfileSetMap
A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.

The INDEX object(s) and this object are excl…
Juniper-TCJuniSetMapr/w
Textual Convention: Juniper-TCJuniSetMap OctetString
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2
juniAtm1483ProfileVccType
Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. 'autoconfig' will recognize both VcMux and LLC formats.
Enumerationr/w
Enumerated Values:
0rfc1483VcMux
1rfc1483Llc
2autoconfig
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.3
juniAtm1483ProfileVccServiceCategory
Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variable Bit Rate.
cbr Constant Bit Rate.
r…
Enumerationr/w
Enumerated Values:
0ubr
1ubrPcr
2nrtVbr
3cbr
4rtVbr
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.4
juniAtm1483ProfileVccPcr
Peak Cell Rate, in kilo-bits per second (kbps), of this circuit.

This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
ubrPcr
…
kilo-bits per secondSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.5
juniAtm1483ProfileVccScr
Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit.

This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
nrtVb…
kilo-bits per secondSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.6
juniAtm1483ProfileVccMbs
Maximum Burst Size, in cells, of this circuit.

This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
nrtVbr
rtVbr
cellsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.7
juniAtm1483ProfileIfAlias
This object is an 'alias' name for the interface as specified by a
network manager, and provides a non-volatile 'handle' for the interface.
This object initializes ifAlias for the interface. Note, all
interfaces create…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.8
juniAtm1483ProfileAdvisoryRxSpeed
Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for the
underlying circuit receive speed. A value of 0 indicate…
kilo-bits per secondInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.9
juniAtm1483ProfileVccOamAdminStatus
The administrative state of OAM for the interface identified by this
entry.
Enumerationr/w
Enumerated Values:
1oamAdminStateDisabled
2oamAdminStateEnabled
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.10
juniAtm1483ProfileVccOamLoopbackFrequency
The OAM loopback frequency for the interface identified by this entry.
secondsUnsigned32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.11
juniAtm1483ProfileVcClassName
The name of the ATM VC class assigned to this profile.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.58.1.1.1.1.12

juniAtm1483ProfileAutoConfTable

table
.1.3.6.1.4.1.4874.2.2.58.1.1.2 · 1 row entry · 5 columns
Open in standard view 
Configures recognition of incoming data encapsulation types that
trigger autoconfiguration on an interface.
juniAtm1483ProfileAutoConfEntry entry .1.3.6.1.4.1.4874.2.2.58.1.1.2.1
Configures recognition of an incoming data encapsulation type that
triggers autoconfiguration on an interface.
Indexes
juniAtm1483ProfileAutoConfId juniAtm1483ProfileAutoConfEncaps
Column Syntax OID
juniAtm1483ProfileAutoConfId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.2.1.1
juniAtm1483ProfileAutoConfEncaps
The encapsulating protocol type to which the autconfiguration
information in this entry applies.

The valid values are:
ip(0),
ppp(1),
pppoe(17),
bridgedEthernet(19)
Juniper-PROFILE-MIBJuniProfileIfEncaps
Textual Convention: Juniper-PROFILE-MIBJuniProfileIfEncaps Enumeration
Type Values:
0ip
1ppp
11atm1483
17pppoe
19bridgedEthernet
127any
 .1.3.6.1.4.1.4874.2.2.58.1.1.2.1.2
juniAtm1483ProfileAutoConfEnable
When enabled, permits autoconfiguration of the specified interface when
the specified encapsulation is recognized in an incoming data frame.

This parameter can only be set when juniAtm1483ProfileAutoConfE…
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.58.1.1.2.1.3
juniAtm1483ProfileAutoConfLockoutMin
The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the encapsulation type from
recognition for the specified interface. This only takes effect
if juniAtm1483ProfileAutoConfE…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.58.1.1.2.1.4
juniAtm1483ProfileAutoConfLockoutMax
The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the encapsulation type from
recognition for the specified interface. This value must equal
or exceed the value for juniAtm…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5

juniAtm1483ProfileNestedProfileTable

table
.1.3.6.1.4.1.4874.2.2.58.1.1.3 · 1 row entry · 3 columns
Open in standard view 
Specifies nested profiles for incoming data encapsulation types.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniAtm1483ProfileNestedProfileEntry entry .1.3.6.1.4.1.4874.2.2.58.1.1.3.1
Specifies nested profile for incoming data encapsulation type.
Indexes
juniAtm1483ProfileNestedProfileId juniAtm1483ProfileNestedProfileEncaps
Column Syntax OID
juniAtm1483ProfileNestedProfileId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.3.1.1
juniAtm1483ProfileNestedProfileEncaps
The encapsulating protocol type to which the nested profile specified
in this entry applies.

The valid values are:
ip(0),
ppp(1),
pppoe(17),
bridgedEthernet(19)
Juniper-PROFILE-MIBJuniProfileIfEncaps
Textual Convention: Juniper-PROFILE-MIBJuniProfileIfEncaps Enumeration
Type Values:
0ip
1ppp
11atm1483
17pppoe
19bridgedEthernet
127any
 .1.3.6.1.4.1.4874.2.2.58.1.1.3.1.2
juniAtm1483ProfileNestedProfileUpperIfProfileName
The name of profile used for the protocol type specified by
juniAtm1483ProfileNestedProfileEncaps.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.58.1.1.3.1.3

juniAtm1483ProfileSubscriberTable

table
.1.3.6.1.4.1.4874.2.2.58.1.1.4 · 1 row entry · 7 columns
Open in standard view 
Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniAtm1483ProfileSubscriberEntry entry .1.3.6.1.4.1.4874.2.2.58.1.1.4.1
Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).
Indexes
juniAtm1483ProfileSubscriberId juniAtm1483ProfileSubscriberEncaps
Column Syntax OID
juniAtm1483ProfileSubscriberId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.1
juniAtm1483ProfileSubscriberEncaps
The encapsulating protocol type to which the subscriber information in
this entry applies.

The valid values are:
ip(0),
bridgedEthernet(19)
Juniper-PROFILE-MIBJuniProfileIfEncaps
Textual Convention: Juniper-PROFILE-MIBJuniProfileIfEncaps Enumeration
Type Values:
0ip
1ppp
11atm1483
17pppoe
19bridgedEthernet
127any
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.2
juniAtm1483ProfileSubscriberNamePrefix
If enabled, indicates whether the value of juniSubscriberName is a
prefix rather than a full name.

This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the followin…
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.3
juniAtm1483ProfileSubscriberName
If juniAtm1483ProfileSubscriberNamePrefix has the value 'enabled', the
value of this object serves as the prefix of a full subscriber name.
The full name is constructed by appending local geographic information
(slot, p…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.4
juniAtm1483ProfileSubscriberPasswordPrefix
If enabled, indicates whether the value of
juniAtm1483ProfileSubscriberPassword is a prefix rather than a full
password.

This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured …
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.5
juniAtm1483ProfileSubscriberPassword
The subscriber's password.

If juniAtm1483ProfileSubscriberPasswordPrefix has the value 'enabled',
the value of this object serves as the prefix of a full subscriber
password. The full password is constru…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.6
juniAtm1483ProfileSubscriberDomain
The subscriber's domain.

This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)

For all other …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.7