IPE-DOT3OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
84

asDot3OamPortTable

table
.1.3.6.1.4.1.119.2.3.69.501.3.46.1 · 1 row entry · 6 columns
Open in standard view 
This table contains status of the OAM capabilities of the
interface.
asDot3OamPortEntry entry .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1
Entries in the table are created automatically.
Indexes
asDot3OamPortIfIndex
Column Syntax OID
asDot3OamPortIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.1
asDot3OamPortNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.2
asDot3OamPortOperStatus
This value is always disabled(1) if OAM is disabled on the
interface via the provDot3OamPortEnabled.

If the link has detected a fault and is transmitting OAMPDUs with
a link fault indication or the interf…
Enumeration
Enumerated Values:
0invalid
1disabled
2linkFault
3passiveWait
4activeSendLocal
5sendLocalAndRemote
6sendLocalAndRemoteOK
7oamPeeringLocallyRejected
8oamPeeringRemotelyRejected
9operational
10nonOperHalfDuplex
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.3
asDot3OamPortMaxOamPduSize
The largest OAMPDU that the OAM entity supports. OA entities
exchange maximum OAMPDU sizes and negotiate to use the smaller of
the two maximum OAMPDU sizes between the peers.
octetsUnsigned32
Constraints:
range: 64-1518
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.4
asDot3OamPortConfigRevision
The configuration revision of the OAM entity as reflected in the
latest OAMPDU sent by the OAM entity. The config revision is used
by OAM entities to indicate that configuration changes have
occurred, which might requir…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.5
asDot3OamPortFunctionsSupported
The OAM functions supported on this interface. OAM consists of
separate functional sets beyond the basic discovery process that
is always required. These functional groups can be supported
independently by any implement…
Bits
Enumerated Values:
0unidirectionalSupport
1loopbackSupport
2eventSupport
3variableSupport
 .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.6

asDot3OamPeerTable

table
.1.3.6.1.4.1.119.2.3.69.501.3.46.2 · 1 row entry · 9 columns
Open in standard view 
This table contains information about the OAM peer for a
particular interface. OAM entities communicates with a single OAM
peer entity on Ethernet links.
asDot3OamPeerEntry entry .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1
An entry in the table containing information on the peer entity
for a single interface.

Note that there is at most on OAM peer for each interface. Peer
information is not reliable when asDot3OamPortStatus i…
Indexes
asDot3OamPeerIfIndex
Column Syntax OID
asDot3OamPeerIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.1
asDot3OamPeerNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.2
asDot3OamPeerMacAddress
The MAC address of the peer OAM entity. The MAC address is
derived from the most recently received OAMPDU.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.3
asDot3OamPeerVendorOui
The OUI of the OAM peer as reflected in the latest Information
OAMPDU received with a Local Information TLV. The OUI can be used
to identify the vendor of the remote OA entity. This value is
initialized to three octets …
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.4
asDot3OamPeerVendorInfo
The Vendor Info of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV.
The semantics of the Vendor Information field is proprietary and
specific to the vendor. This value is…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.5
asDot3OamPeerMode
The mode of the OAM peer as reflected in the latest Information
OAMPDU received with a Local Information TLV. The mode of the
peer can be determined from the Configuration field in the Local
Information TLV of the last …
Enumeration
Enumerated Values:
0invalid
1passive
2active
3unknown
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.6
asDot3OamPeerMaxOamPduSize
The maximum size of OAMPDU supported by the peer as reflected in
the latest Information OAMPDU received with a Local Information
TLV. Ethernet OAM on this interface must not use OAMPDUs that
exceed this size. The maximu…
octetsUnsigned32
Constraints:
range: 0-0
range: 64-1518
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.7
asDot3OamPeerConfigRevision
The configuration revision of the OAM peer as reflected in the
latest OAMPDU. This attribute is changed by the peer whenever it
has a local configuration change for Ethernet OA on this
interface. The configuration revis…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.8
asDot3OamPeerFunctionsSupported
The OAM functions supported on the interface. OAM consists of
separate functionality sets above the basic discovery process.
This value indicates the capabilities of the peer OAM entity with
respect to these functions. …
Bits
Enumerated Values:
0unidirectionalSupport
1loopbackSupport
2eventSupport
3variableSupport
 .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.9

asDot3OamPortStatsTable

table
.1.3.6.1.4.1.119.2.3.69.501.3.46.3 · 1 row entry · 19 columns
Open in standard view 
This table contains statistics for the OAM function on a
particular interface. There is an entry in the table for every
asDot3OamPortTable.
asDot3OamPortStatsEntry entry .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1
An entry in the table containing statistics information on the
Ethernet OAM function for a single interface. Entries are
automatically created for every entry in the asDot3OamPortTable.
Counters are maintained across tr…
Indexes
asDot3OamPortStatsIfIndex
Column Syntax OID
asDot3OamPortStatsIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.1
asDot3OamPortStatsNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.2
asDot3OamInformationTx
A count of the number of Information OAMPDUs transmitted on the
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.3
asDot3OamInformationRx
A count of the number of Information OAMPDUs received on the
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.4
asDot3OamUniqueEventNotifTx
A count of the number of unique Event OAMPDUs transmitted on the
interface. Event Notifications may be sent in duplicate to
increase the probability of successfully being received, given
the possibility that a frame may…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.5
asDot3OamUniqueEventNotifRx
A count of the number of unique Event OAMPDUs received on the
interface. Event Notifications may be sent in duplicate to
increase the probability of successfully being received, given
the possibility that a frame may be…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.6
asDot3OamDuplicateEventNotifTx
A count of the number of duplicate Event OAMPDUs transmitted on
the interface. Event Notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.7
asDot3OamDuplicateEventNotifRx
A count of the number of duplicate Event OAMPDUs received on the
interface. Event Notification OAMPDUs may be sent in duplicate to
increase the probability of successfully being received, given
the possibility that a fr…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.8
asDot3OamLoopbackControlTx
A count of the number of Loopback Control OAMPDUs transmitted on
the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.9
asDot3OamLoopbackControlRx
A count of the number of Loopback Control OAMPDUs received on
the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.10
asDot3OamVariableRequestTx
A count of the number of Variable Request OAMPDUs transmitted on
the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.11
asDot3OamVariableRequestRx
A count of the number of Variable Request OAMPDUs received on
the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.12
asDot3OamVariableResponseTx
A count of the number of Variable Response OAMPDUs transmitted
on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.13
asDot3OamVariableResponseRx
A count of the number of Variable Response OAMPDUs received on
the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.14
asDot3OamOrgSpecificTx
A count of the number of Organization Specific OAMPDUs
transmitted on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.15
asDot3OamOrgSpecificRx
A count of the number of Organization Specific OAMPDUs received
on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.16
asDot3OamUnsupportedCodesTx
A count of the number of OAMPDUs transmitted on the interface
with an unsupported op-code.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.17
asDot3OamUnsupportedCodesRx
A count of the number of OAMPDUs received on the interface with
an unsupported op-code.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.18
asDot3OamFramesLostDueToOam
A count of the number of frames that were dropped by the OA
multiplexer. Since the OAM multiplexer has multiple inputs and a
single output, there may be cases where frames are dropped due to
transmit resource contention…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.19

asDot3OamPortAlarmTable

table
.1.3.6.1.4.1.119.2.3.69.501.3.46.4 · 1 row entry · 12 columns
Open in standard view 
This table contains alarm & status information of the
interface.
asDot3OamPortAlarmEntry entry .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1
An entry in the table containing alarm & status information on
the Ethernet OAM function for a single interface. Entries are
automatically created for enery entry in the asDot3OamPortTable.
Indexes
asDot3OamPortAlarmIfIndex
Column Syntax OID
asDot3OamPortAlarmIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.1
asDot3OamPortAlarmNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.2
asDot3OamPortLinkOamDown
The alarm status of the OAM function status. When the Discovery
State of the interface is not in SEND_ANY, the object becomes
alarm state.
SeverityValue
Textual Convention: SeverityValue Enumeration
Type Values:
1cleared
2indetermine
3critical
4major
5minor
6warning
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.3
asDot3OamPortLocalDyingGasp
Generating Dying Gasp OAMPDU status.
If the OAM entity sends the DyingGasp OAMPDUs, the object will
return the value 'generated'.
Enumeration
Enumerated Values:
0invalid
1normal
2generated
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.4
asDot3OamPortLocalCriticalEvent
Generating Critical Event OAMPDU status.
If the OAM entity sends the CriticalEvent OAMPDUs, the object
will return the value 'generated'.
Enumeration
Enumerated Values:
0invalid
1normal
2generated
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.5
asDot3OamPortRemoteErroredSymbolEvent
Receiving Errored Symbol Event OAMPDU status.
If the OAM entity receives the ErroredSymbolEvent OAMPDUs from
peer, the object will show the value 'received'.
Enumeration
Enumerated Values:
0invalid
1normal
2received
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.6
asDot3OamPortRemoteErroredFramePeriodEvent
Receiving Errored Frame Period Event OAMPDU status.
If the OAM entity receives the ErroredFramePeriodEvent OAMPDUs
from peer, the object will show the value 'received'.
Enumeration
Enumerated Values:
0invalid
1normal
2received
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.7
asDot3OamPortRemoteErroredFrameEvent
Receiving Errored Frame Event OAMPDU status.
If the OAM entity receives the ErroredFrameEvent OAMPDUs from
peer, the object will show the value 'received'.
Enumeration
Enumerated Values:
0invalid
1normal
2received
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.8
asDot3OamPortRemoteErroredFrameSecondEvent
Receiving Errored Frame Second Event OAMPDU status.
If the OAM entity receives the ErroredFrameSecondEvent OAMPDUs
from peer, the object will show the value 'received'.
Enumeration
Enumerated Values:
0invalid
1normal
2received
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.9
asDot3OamPortRemoteLinkFault
Receiving Link Fault OAMPDU.
If the OAM entity receives the LinkFault OAMPDUs from peer, the
object will report Link Fault Alarm of the interface.
SeverityValue
Textual Convention: SeverityValue Enumeration
Type Values:
1cleared
2indetermine
3critical
4major
5minor
6warning
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.10
asDot3OamPortRemoteDyingGasp
Receiving DyingGasp OAMPDU.
If the OAM entity receives the DyingGasp OAMPDUs from peer, the
object will report DyingGasp Alarm of the interface.
SeverityValue
Textual Convention: SeverityValue Enumeration
Type Values:
1cleared
2indetermine
3critical
4major
5minor
6warning
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.11
asDot3OamPortRemoteCriticalEvent
Receiving Critial Event OAMPDU.
If the OAM entity receives the CriticalEvent OAMPDUs from peer,
the object will report CriticalEvent Alarm of the interface.
SeverityValue
Textual Convention: SeverityValue Enumeration
Type Values:
1cleared
2indetermine
3critical
4major
5minor
6warning
 .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.12

provDot3OamPortTable

table
.1.3.6.1.4.1.119.2.3.69.501.5.46.1 · 1 row entry · 9 columns
Open in standard view 
This table contains provisioning objects for the OAM function on
a particular interface.
provDot3OamPortEntry entry .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1
An entry in the table that contains configuration on the
Ethernet OAM function for sngle interface. Entries in the table
are created automatically for each interface.
Indexes
provDot3OamPortIfIndex
Column Syntax OID
provDot3OamPortIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.1
provDot3OamPortNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.2
provDot3OamPortEnabled
This object is used to provision the default administrative OAM
mode for the interface. This object represents the desired state
of OAM for this interface.

This object always starts disabled state until e…
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.3
provDot3OamPortMode
This object configures the mode of OAM operation for this
interface. OAM on Ethernet interfaces may be in 'active' mode or
'passive' mode. These two modes differ in that active mode
provides additional capabilities to i…
Enumerationr/w
Enumerated Values:
1passive
2active
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.4
provDot3OamTxPduRepetitionTimes
This object configures the number of notification OAMPDUs when
the critical event occurs.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.5
provDot3OamLocalLinkLostTimer
This object configures the detection time of losing the OAM Link
state.
secondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.6
provDot3OamTxPduCounts
This object configures the maximum transmission counts of slow
protocol PDUs excluding DyingGasp and Critical Event PDUs.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.7
provDot3OamLoopbackIgnoreRx
If ignore(1) is set, the OAM entity ignores Loopback Request
OAMPDUs from peer OAM entity, and the OAM entity can only
initiate loopback locally. It is necessary to change the value to
process(2) to accept loopback requ…
Enumerationr/w
Enumerated Values:
1ignore
2process
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.8
provDot3OamLlfCriticalEvent
If enable is set, the OAM entity sends OAMPDUs with Critical
Event flag when the LLF control is notified.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.9

provDot3OamEventTable

table
.1.3.6.1.4.1.119.2.3.69.501.5.46.3 · 1 row entry · 8 columns
Open in standard view 
Ethernet OAM includes the ability to generate and receive Event
Notification OAMPDUs to indicate various link problems. This
table contains the mechanisms to enable Event Notifications.
There is one entry in the table for every entry in
asDot3OamPortTable. The values in the table are maintained across
changes to asDot3OamPortStatus.
provDot3OamEventEntry entry .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1
Entries are automatically created and deleted from this table,
and exists whenever the OAM entity supports Ethernet OA events.

Event configuration controls when the local management entity
sends Event Notif…
Indexes
provDot3OamEventIfIndex
Column Syntax OID
provDot3OamEventIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.1
provDot3OamEventNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.2
provDot3OamErrSymPeriodEvNotifEnable
If enable, the OAM entity should send an Event Notification
OAMPDU when an Errored Symbol Period Event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.3
provDot3OamErrFramePeriodEvNotifEnable
If enable, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Period Event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.4
provDot3OamErrFrameEvNotifEnable
If enable, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.5
provDot3OamErrFrameSecsEvNotifEnable
If enable, the local OAM entity should send an Event
Notification OAMPDU when an Errored Frame Seconds Event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.6
provDot3OamDyingGaspEnable
If enable, the local OAM entity should attempt to indicate a
dying gasp via the OAMPDU flags to its peer OAM entity when a
dying gasp event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.7
provDot3OamCriticalEventEnable
If enable, the local OAM entity should attempt to indicate a
critical event via the OAMPDU flags to its peer OAM entity when a
critical event occurs.
EnableDisableValuer/w
Textual Convention: EnableDisableValue Enumeration
Type Values:
0invalid
1disable
2enable
 .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.8

maintDot3OamLoopbackTable

table
.1.3.6.1.4.1.119.2.3.69.501.6.46.1 · 1 row entry · 8 columns
Open in standard view 
This table contains the On-demand Loopback control objects for
Ethernet OAM functions.
maintDot3OamLoopbackEntry entry .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1
The system can execute up to 5 loopback functions
simultaneously, so 5 entries are automatically created when agent
boots.
Indexes
maintDot3OamLoopbackIndex
Column Syntax OID
maintDot3OamLoopbackIndex
Index of this table.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.1
maintDot3OamLoopbackNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.2
maintDot3OamLoopbackIfIndex
Set Index of target interface.
The default value of this object is '0', and the value is
necessary for executing loopback function.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.3
maintDot3OamLoopbackExecute
The object is used to execute loopback function.
Setting to 'execute' to start loopback testing.
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.4
maintDot3OamLoopbackFrames
The object is used to configure the number of transmit loopback
frames.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.5
maintDot3OamLoopbackPDULength
The length of Loopback OAMPDU.
Unsigned32r/w
Constraints:
range: 64-1518
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.6
maintDot3OamLoopbackTxCounts
The object is used to configure the number of transmit frames
per second.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.7
maintDot3OamLoopbackTimeout
The object is used to configure the time of detecting timeout of
loopback testing.
secondsUnsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.8

maintDot3OamLoopbackResultTable

table
.1.3.6.1.4.1.119.2.3.69.501.6.46.2 · 1 row entry · 9 columns
Open in standard view 
This table contains the results of loopback testing. The results
will be updated when the loopback testing is completed.
maintDot3OamLoopbackResultEntry entry .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1
The entries are automatically created when the agent boots. And
the index of the entry is identical to the
'maintDot3OamLoopbackIndex'.
Indexes
maintDot3OamLoopbackResultIndex
Column Syntax OID
maintDot3OamLoopbackResultIndex
Index of this table.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.1
maintDot3OamLoopbackResultNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.2
maintDot3OamLoopbackResultTxFrames
The number of transmitted loopback OAMPDUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.3
maintDot3OamLoopbackResultTxFrameOctets
The total octets of transmitted loopback OAMPDUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.4
maintDot3OamLoopbackResultRxFrames
The number of received loopback OAMPDUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.5
maintDot3OamLoopbackResultRxFrameOctets
The total octets of received loopback OAMPDUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.6
maintDot3OamLoopbackResultRxErroredFrames
The number of received errored OAMPDUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.7
maintDot3OamLoopbackResultExecStatus
The status of loopback test result.
'noLoopback' means no loopback test is executing. 'executing'
represents the loopback test is in progress, and the new loopback
request will be rejected.
'failed' means the previous …
Enumeration
Enumerated Values:
1noLoopback
2failed
3completed
4executing
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.8
maintDot3OamLoopbackResultLastExecute
The date and time of executing loopback test.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.9

maintDot3OamLoopbackPortTable

table
.1.3.6.1.4.1.119.2.3.69.501.6.46.3 · 1 row entry · 4 columns
Open in standard view 
This table contains control objects for loopback which was
triggered by peer node.
maintDot3OamLoopbackPortEntry entry .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1
Indexes
maintDot3OamLoopbackPortIfIndex
Column Syntax OID
maintDot3OamLoopbackPortIfIndex
Index of this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.1
maintDot3OamLoopbackPortNEAddress
reserved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.2
maintDot3OamLoopbackPortControl
This object controls the loopback function.

Writing the value 'initiateLoopback' causes the local OAM entity
to start the loopback process with its peer. This value can only
be written when the maintDot3O…
Enumerationr/w
Enumerated Values:
0invalid
1noOperation
2initiateLoopback
3terminateLoopback
 .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.3
maintDot3OamLoopbackPortStatus
The loopback status of the local OAM entity.

This object returns the loopback point. This means that the value
'remoteLoopback' represents the local OAM entity is initiator of
loopback and the loopback po…
Enumeration
Enumerated Values:
0invalid
1noLoopback
2remoteLoopback
3localLoopback
 .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.4