asDot3OamPortOperStatus
IPE-DOT3OAM-MIB ·
.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.3
Object
column
Enumeration
This value is always disabled(1) if OAM is disabled on the
interface via the provDot3OamPortEnabled.
If the link has detected a fault and is transmitting OAMPDUs with
a link fault indication or the interface is not operational, the
value is linkFault(2).
The passiveWait(3) state is returned only by OAM entities in
passive mode and reflects the state in which the OAM entity is
waiting to see if the peer device is OA capable. The
activeSendLocal(4) value is used by active mode trying to
discover whether the peer has OAM capability but has not yet made
that determination.
The state sendLocalAndRemote(5) reflects that the local OA entity
has discovered the peer but has not yet accepted or rejected the
configuration of the peer. The local device can, for whatever
reason, decide that the peer device is unacceptable and decline
OAM peering. If the local OAM entity rejects the peer OAM entity,
the state becomes oamPeeringLocallyRejected(7). If the OAM
peering is allowed by the local device, the state moves to
sendLocalAndRemoteOk(6).
If the remote OAM entity rejects the peering, the state becomes
oamPeeringRemotelyRejected(8). When the local OAM entity learns
that both it and the remote OAM entity have accepted the peering,
the state moves to operational(9). Since Ethernet OAM functions
are not designed to work completely over half-duplex interfaces,
the value nonOperHalfDuplex(10) is returned whenever Ethernet OAM
is enabled, but the interface is in half-duplex operation.
Context
- MIB
- IPE-DOT3OAM-MIB
- OID
.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- asDot3OamPortEntry
- Table
- asDot3OamPortTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | invalid |
1 | disabled |
2 | linkFault |
3 | passiveWait |
4 | activeSendLocal |
5 | sendLocalAndRemote |
6 | sendLocalAndRemoteOK |
7 | oamPeeringLocallyRejected |
8 | oamPeeringRemotelyRejected |
9 | operational |
10 | nonOperHalfDuplex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| asDot3OamPortIfIndex Index of this table. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.1 |
| asDot3OamPortNEAddress reserved. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.2 |
| asDot3OamPortMaxOamPduSize The largest OAMPDU that the OAM entity supports. OA entities
exchange maximum OAMPDU sizes and negotiate to use the smaller of
the two maximum OAMPDU sizes between the peers. | column | octets Unsigned32 | .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.4 |
| asDot3OamPortConfigRevision The configuration revision of the OAM entity as reflected in the
latest OAMPDU sent by the OAM entity. The config revision is used
by OAM entities to indicate that configuration c… | column | Unsigned32 | .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.5 |
| asDot3OamPortFunctionsSupported The OAM functions supported on this interface. OAM consists of
separate functional sets beyond the basic discovery process that
is always required. These functional groups can be … | column | Bits | .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.6 |