IMA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
135
.1.3.6.1.4.1.353.5.7.1.1.2 · 1 row entry · 42 columns
The IMA Group Configuration table.
imaGroupEntry entry .1.3.6.1.4.1.353.5.7.1.1.2.1
An entry in the IMA Group table.
Indexes
imaGroupIndex
Column Syntax OID
imaGroupIndex
A unique value for the IMA Group.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.1
imaGroupRowStatus
The imaGroupRowStatus object allows create, change, and delete
operations on imaGroupTable entries.

To create a new conceptual row (or instance) of the imaGroupTable,
imaGroupRowStatus must be set to 'cre…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.353.5.7.1.1.2.1.2
imaGroupIfIndex
This object identifies the logical interface number ('ifIndex')
assigned to this IMA group, and is used to identify corresponding
rows in the Interfaces MIB.

Note that re-initialization of the management …
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.3
imaGroupNeState
The current operational state of the near-end IMA Group State
Machine.
ImaGroupState
Textual Convention: ImaGroupState Enumeration
Type Values:
1notConfigured
2startUp
3startUpAck
4configAbortUnsupportedM
5configAbortIncompatibleSymmetry
6configAbortOther
7insufficientLinks
8blocked
9operational
10configAbortUnsupportedImaVersion
.1.3.6.1.4.1.353.5.7.1.1.2.1.4
imaGroupFeState
The current operational state of the far-end IMA Group State
Machine.
ImaGroupState
Textual Convention: ImaGroupState Enumeration
Type Values:
1notConfigured
2startUp
3startUpAck
4configAbortUnsupportedM
5configAbortIncompatibleSymmetry
6configAbortOther
7insufficientLinks
8blocked
9operational
10configAbortUnsupportedImaVersion
.1.3.6.1.4.1.353.5.7.1.1.2.1.5
imaGroupFailureStatus
The current failure status of the IMA group (the reason why
the GTSM is in the down state).
ImaGroupFailureStatus
Textual Convention: ImaGroupFailureStatus Enumeration
Type Values:
1noFailure
2startUpNe
3startUpFe
4invalidMValueNe
5invalidMValueFe
6failedAssymetricNe
7failedAssymetricFe
8insufficientLinksNe
9insufficientLinksFe
10blockedNe
11blockedFe
12otherFailure
13invalidImaVersionNe
14invalidImaVersionFe
.1.3.6.1.4.1.353.5.7.1.1.2.1.6
imaGroupSymmetry
Symmetry of the IMA group.
ImaGroupSymmetryr/w
Textual Convention: ImaGroupSymmetry Enumeration
Type Values:
1symmetricOperation
2asymmetricOperation
3asymmetricConfiguration
.1.3.6.1.4.1.353.5.7.1.1.2.1.7
imaGroupMinNumTxLinks
Minimum number of transmit links required to be Active for
the IMA group to be in the Operational state.
Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.353.5.7.1.1.2.1.8
imaGroupMinNumRxLinks
Minimum number of receive links required to be Active for
the IMA group to be in the Operational state.
Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.353.5.7.1.1.2.1.9
imaGroupNeTxClkMode
Transmit clocking mode used by the near-end IMA group.
ImaGroupTxClkModer/w
Textual Convention: ImaGroupTxClkMode Enumeration
Type Values:
1ctc
2itc
.1.3.6.1.4.1.353.5.7.1.1.2.1.10
imaGroupFeTxClkMode
Transmit clocking mode used by the far-end IMA group.
ImaGroupTxClkMode
Textual Convention: ImaGroupTxClkMode Enumeration
Type Values:
1ctc
2itc
.1.3.6.1.4.1.353.5.7.1.1.2.1.11
imaGroupTxTimingRefLink
The ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery from
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA gr…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.12
imaGroupRxTimingRefLink
The ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.13
imaGroupLastChange
The time-of-day the IMA group last changed operational
state (i.e., value of imaGroupNeState changed).
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.353.5.7.1.1.2.1.14
imaGroupTxImaId
The IMA ID currently in use by the near-end IMA function.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.353.5.7.1.1.2.1.15
imaGroupRxImaId
The IMA ID currently in use by the far-end IMA function.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.353.5.7.1.1.2.1.16
imaGroupTxFrameLength
The frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup.
ImaFrameLengthr/w
Textual Convention: ImaFrameLength Enumeration
Type Values:
32m32
64m64
128m128
256m256
.1.3.6.1.4.1.353.5.7.1.1.2.1.17
imaGroupRxFrameLength
Value of IMA frame length as received from remote IMA function.
ImaFrameLength
Textual Convention: ImaFrameLength Enumeration
Type Values:
32m32
64m64
128m128
256m256
.1.3.6.1.4.1.353.5.7.1.1.2.1.18
imaGroupDiffDelayMax
The maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface.
MilliSecondsr/w
Textual Convention: MilliSeconds Integer32
.1.3.6.1.4.1.353.5.7.1.1.2.1.19
imaGroupLeastDelayLink
The ifIndex of the link configured in the IMA group which has
the smallest link propagation delay. The distinguished value of
zero may be used if no link has been configured in the IMA group,
or if the link with the sm…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.20
imaGroupDiffDelayMaxObs
The latest maximum differential delay observed (in milliseconds)
between the links having the least and most link propagation delay,
among the receive links that are currently configured in the IMA
group.
MilliSeconds
Textual Convention: MilliSeconds Integer32
.1.3.6.1.4.1.353.5.7.1.1.2.1.21
imaGroupAlphaValue
This indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.
Integer32r/w
Constraints:
range: 1-2
.1.3.6.1.4.1.353.5.7.1.1.2.1.22
imaGroupBetaValue
This indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.
Integer32r/w
Constraints:
range: 1-5
.1.3.6.1.4.1.353.5.7.1.1.2.1.23
imaGroupGammaValue
This indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from the IMA PreSync state.
Integer32r/w
Constraints:
range: 1-5
.1.3.6.1.4.1.353.5.7.1.1.2.1.24
imaGroupRunningSecs
The amount of time (in seconds) since this IMA group has
been in the Operational state.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.25
imaGroupUnavailSecs
Count of one second intervals where the IMA Group Traffic
State Machine is Down.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.26
imaGroupNeNumFailures
The number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported since power-up or reboot.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.27
imaGroupFeNumFailures
The number of times a far-end group failure (Config-Aborted-FE,
Insufficient-Links-FE, Blocked-FE) has been reported since
power-up or reboot. This is an optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.28
imaGroupTxAvailCellRate
The current cell rate (truncated value in cells per second)
provided by this IMA group in the transmit direction,
considering all the transmit links in the Active state.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.29
imaGroupRxAvailCellRate
The current cell rate (truncated value in cells per second)
provided by this IMA group in the receive direction,
considering all the receive links in the Active state.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.30
imaGroupNumTxCfgLinks
The number of links that are configured to transmit in this IMA
group. This attribute overwrites the value of the
imaGroupNumRxActLinks attribute when the IMA group is configured
in the Symmetrical Configuration group s…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.31
imaGroupNumRxCfgLinks
The number of links that are configured to receive in this IMA
group. This attribute is overwritten by the value of the
imaGroupNumTxActLinks attribute when the IMA group is configured
in the Symmetrical Configuration g…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.32
imaGroupNumTxActLinks
The number of links which are configured to transmit and are
currently Active in this IMA group.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.33
imaGroupNumRxActLinks
The number of links which are configured to receive and are
currently Active in this IMA group.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.2.1.34
imaGroupTestLinkIfIndex
This object is used to designate an interface as the test link
for use in the Test Pattern Procedure. The distinguished value of
zero specifies that the implementation may choose the Test Link,
in which case, the imple…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.353.5.7.1.1.2.1.35
imaGroupTestPattern
The value of this object is used to specify the Tx Test Pattern
in an IMA group loopback operation. A value in the range 0 to
255 designates a specific pattern. The distinguished value of
-1 specifies that the impleme…
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.353.5.7.1.1.2.1.36
imaGroupTestProcStatus
This object is used to enable or disable the
Test Pattern Procedure, and to note whether at least one
link failed the test.

The test is started by setting operating(2) status. If any
link should fail the…
ImaTestProcStatusr/w
Textual Convention: ImaTestProcStatus Enumeration
Type Values:
1disabled
2operating
3linkFail
.1.3.6.1.4.1.353.5.7.1.1.2.1.37
imaGroupValidIntervals
The number of previous 15 minute intervals for which valid data
was collected. The value will be 96 unless the IMA group table
entry was created within the last 24 hours, in which case the value
will be the number of c…
Integer32
Constraints:
range: 0-96
.1.3.6.1.4.1.353.5.7.1.1.2.1.38
imaGroupInvalidIntervals
The number of intervals for which no valid data is available.
This attribute is only mandatory when the IMA Group Interval
Statistics and/or IMA Group Total Statistics objects are
implemented.
Integer32
Constraints:
range: 0-96
.1.3.6.1.4.1.353.5.7.1.1.2.1.39
imaGroupTimeElapsed
The number of seconds that have elapsed since the beginning of
the current measurement period. This attribute is only mandatory
when the IMA Group Current Statistics are implemented.
Integer32
Constraints:
range: 0-899
.1.3.6.1.4.1.353.5.7.1.1.2.1.40
imaGroupTxOamLabelValue
IMA OAM Label value transmitted by the NE IMA unit.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.353.5.7.1.1.2.1.41
imaGroupRxOamLabelValue
IMA OAM Label value transmitted by the FE IMA unit. The value 0
likely means that the IMA unit has not received an OAM Label
from the FE IMA unit at this time.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.353.5.7.1.1.2.1.42
.1.3.6.1.4.1.353.5.7.1.1.3 · 1 row entry · 1 columns
A table mapping the 'ifIndex' values of 'imaGroupIfIndex'
to the 'imaGroupIndex' values of the corresponding IMA group.
imaGroupMappingEntry entry .1.3.6.1.4.1.353.5.7.1.1.3.1
Each row describes one ifIndex to imaGroupIndex mapping.
Indexes
IF-MIBifIndex
Column Syntax OID
imaGroupMappingIndex
The imaGroupIndex of the IMA Group which implements the
specified interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.353.5.7.1.1.3.1.1
.1.3.6.1.4.1.353.5.7.1.1.4 · 1 row entry · 33 columns
The IMA group Link Status and Configuration table.
imaLinkEntry entry .1.3.6.1.4.1.353.5.7.1.1.4.1
An entry in the IMA Group Link table.
Indexes
imaLinkIfIndex
Column Syntax OID
imaLinkIfIndex
This corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('ifIndex') assigned to
this IMA link.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.353.5.7.1.1.4.1.1
imaLinkRowStatus
The imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.

To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createA…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.353.5.7.1.1.4.1.2
imaLinkGroupIndex
The value which identifies the IMA group (imaGroupIndex)
of which this link is a member.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.353.5.7.1.1.4.1.3
imaLinkNeTxState
The current state of the near-end transmit link.
ImaLinkState
Textual Convention: ImaLinkState Enumeration
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
.1.3.6.1.4.1.353.5.7.1.1.4.1.4
imaLinkNeRxState
The current state of the near-end receive link.
ImaLinkState
Textual Convention: ImaLinkState Enumeration
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
.1.3.6.1.4.1.353.5.7.1.1.4.1.5
imaLinkFeTxState
The current state of the far-end transmit link as reported
via ICP cells.
ImaLinkState
Textual Convention: ImaLinkState Enumeration
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
.1.3.6.1.4.1.353.5.7.1.1.4.1.6
imaLinkFeRxState
The current state of the far-end receive link as reported
via ICP cells.
ImaLinkState
Textual Convention: ImaLinkState Enumeration
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
.1.3.6.1.4.1.353.5.7.1.1.4.1.7
imaLinkNeRxFailureStatus
The current link failure status of the near-end receive link.
ImaLinkFailureStatus
Textual Convention: ImaLinkFailureStatus Enumeration
Type Values:
1noFailure
2imaLinkFailure
3lifFailure
4lodsFailure
5misConnected
6blocked
7fault
8farEndTxLinkUnusable
9farEndRxLinkUnusable
.1.3.6.1.4.1.353.5.7.1.1.4.1.8
imaLinkFeRxFailureStatus
The current link failure status of the far-end receive link
as reported via ICP cells.
ImaLinkFailureStatus
Textual Convention: ImaLinkFailureStatus Enumeration
Type Values:
1noFailure
2imaLinkFailure
3lifFailure
4lodsFailure
5misConnected
6blocked
7fault
8farEndTxLinkUnusable
9farEndRxLinkUnusable
.1.3.6.1.4.1.353.5.7.1.1.4.1.9
imaLinkTxLid
The outgoing LID used currently on the link by the local end.
This value has meaning only if the link belongs to an IMA group.
Integer32
Constraints:
range: 0-31
.1.3.6.1.4.1.353.5.7.1.1.4.1.10
imaLinkRxLid
The incoming LID used currently on the link by the remote
end as reported via ICP cells. This value has meaning only
if the link belongs to an IMA group.
Integer32
Constraints:
range: 0-31
.1.3.6.1.4.1.353.5.7.1.1.4.1.11
imaLinkRelDelay
The latest measured delay on this link relative to the link, in
the same IMA group, with the least delay.
MilliSeconds
Textual Convention: MilliSeconds Integer32
.1.3.6.1.4.1.353.5.7.1.1.4.1.12
imaLinkImaViolations
ICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.13
imaLinkOifAnomalies
The number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end. This is an optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.14
imaLinkNeSevErroredSecs
Count of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
condition.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.15
imaLinkFeSevErroredSecs
Count of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.16
imaLinkNeUnavailSecs
Count of unavailable seconds at near-end: unavailability begins
at the onset of 10 contiguous SES-IMA and ends at the onset
of 10 contiguous seconds with no SES-IMA.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.17
imaLinkFeUnavailSecs
Count of unavailable seconds at far-end: unavailability begins
at the onset of 10 contiguous SES-IMA-FE and ends at the onset of
10 contiguous seconds with no SES-IMA-FE.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.18
imaLinkNeTxUnusableSecs
Tx Unusable seconds: count of Tx Unusable seconds at the near-end
Tx LSM.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.19
imaLinkNeRxUnusableSecs
Rx Unusable seconds: count of Rx Unusable seconds at the near-end
Rx LSM.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.20
imaLinkFeTxUnusableSecs
Tx Unusable seconds at far-end: count of seconds with Tx Unusable
indications from the far-end Tx LSM.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.21
imaLinkFeRxUnusableSecs
Rx Unusable seconds at far-end: count of seconds with Rx Unusable
indications from the far-end Rx LSM.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.22
imaLinkNeTxNumFailures
The number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fault).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.23
imaLinkNeRxNumFailures
The number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS,
RFI-IMA, Mis-Connected or some form of implementation specific receive
fault).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.24
imaLinkFeTxNumFailures
The number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE). This is an
optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.25
imaLinkFeRxNumFailures
The number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE). This is an
optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.26
imaLinkTxStuffs
Count of stuff events inserted in the transmit direction.
This is an optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.27
imaLinkRxStuffs
Count of stuff events detected in the receive direction.
This is an optional attribute.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.4.1.28
imaLinkRxTestPattern
This object identifies the test pattern received in the
ICP Cell (octet 17) on the link during the IMA Test Pattern
Procedure. This value may then be compared to the transmitted
test pattern.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.353.5.7.1.1.4.1.29
imaLinkTestProcStatus
This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interfa…
ImaTestProcStatus
Textual Convention: ImaTestProcStatus Enumeration
Type Values:
1disabled
2operating
3linkFail
.1.3.6.1.4.1.353.5.7.1.1.4.1.30
imaLinkValidIntervals
The number of previous 15 minute intervals for which valid data
was collected. The value will be 96 unless the IMA group table
entry was created within the last 24 hours, in which case the value
will be the number of c…
Integer32
Constraints:
range: 0-96
.1.3.6.1.4.1.353.5.7.1.1.4.1.31
imaLinkInvalidIntervals
The number of intervals for which no valid data is available.
This attribute is only mandatory when the IMA Link Interval
Statistics and/or IMA Link Total Statistics objects are
implemented.
Integer32
Constraints:
range: 0-96
.1.3.6.1.4.1.353.5.7.1.1.4.1.32
imaLinkTimeElapsed
The number of seconds that have elapsed since the beginning of
the current measurement period. This attribute is only mandatory
when the IMA Link Current Statistics are implemented.
Integer32
Constraints:
range: 0-899
.1.3.6.1.4.1.353.5.7.1.1.4.1.33
.1.3.6.1.4.1.353.5.7.1.1.7 · 1 row entry · 3 columns
The IMA Group Current table.
imaGroupCurrentEntry entry .1.3.6.1.4.1.353.5.7.1.1.7.1
An entry in the IMA Group Current table.
Indexes
imaGroupIndex
Column Syntax OID
imaGroupCurrentUnavailSecs
Count of one second intervals where the IMA Group Traffic
State Machine is Down in the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.7.1.1
imaGroupCurrentNeNumFailures
The number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported in the current 15
minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.7.1.2
imaGroupCurrentFeNumFailures
The number of times a far-end group failure (Config-Aborted-FE,
Insufficient-Links-FE, Blocked-FE) has been reported in the
current 15 minutes interval. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.7.1.3
.1.3.6.1.4.1.353.5.7.1.1.8 · 1 row entry · 4 columns
The IMA Group Interval table.
imaGroupIntervalEntry entry .1.3.6.1.4.1.353.5.7.1.1.8.1
An entry in the IMA Group Interval table.
Indexes
imaGroupIndex imaGroupIntervalNumber
Column Syntax OID
imaGroupIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least
recently completed 15 minutes interval (assuming that all
96 intervals are valid).
Integer32
Constraints:
range: 1-96
.1.3.6.1.4.1.353.5.7.1.1.8.1.1
imaGroupIntervalUnavailSecs
Count of one second intervals where the IMA Group Traffic
State Machine is Down in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.8.1.2
imaGroupIntervalNeNumFailures
The number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported in one of the previous
96, individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.8.1.3
imaGroupIntervalFeNumFailures
The number of times a far-end group failure (Config-Aborted-FE,
Insufficient-Links-FE, Blocked-FE) has been reported in one of
the previous 96, individual 15 minute, intervals. This is an
optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.8.1.4
.1.3.6.1.4.1.353.5.7.1.1.9 · 1 row entry · 3 columns
The IMA Group Total table.
imaGroupTotalEntry entry .1.3.6.1.4.1.353.5.7.1.1.9.1
An entry in the IMA Group Total table.
Indexes
imaGroupIndex
Column Syntax OID
imaGroupTotalUnavailSecs
Count of one second intervals where the IMA Group Traffic
State Machine is Down in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.9.1.1
imaGroupTotalNeNumFailures
The number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported in the previous 24 hour
interval. Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.9.1.2
imaGroupTotalFeNumFailures
The number of times a far-end group failure (Config-Aborted-FE,
Insufficient-Links-FE, Blocked-FE) has been reported in the
previous 24 hour interval. Invalid 15 minute intervals count
as 0. This is an optional attrib…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.9.1.3
.1.3.6.1.4.1.353.5.7.1.1.10 · 1 row entry · 16 columns
The IMA Link Current table.
imaLinkCurrentEntry entry .1.3.6.1.4.1.353.5.7.1.1.10.1
An entry in the IMA Link Current table.
Indexes
IF-MIBifIndex
Column Syntax OID
imaLinkCurrentImaViolations
ICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions, in the current
15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.1
imaLinkCurrentOifAnomalies
The number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end in the current 15 minute interval.
This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.2
imaLinkCurrentNeSevErroredSecs
Count of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
condition, in the c…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.3
imaLinkCurrentFeSevErroredSecs
Count of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition, in the current 15
minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.4
imaLinkCurrentNeUnavailSecs
Count of unavailable seconds at near-end in the current 15 minute
interval: unavailability begins at the onset of 10 contiguous
SES-IMA and ends at the onset of 10 contiguous seconds with no
SES-IMA.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.5
imaLinkCurrentFeUnavailSecs
Count of unavailable seconds at far-end in the current 15 minute
interval: unavailability begins at the onset of 10 contiguous
SES-IMA-FE and ends at the onset of 10 contiguous seconds with no
SES-IMA-FE.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.6
imaLinkCurrentNeTxUnusableSecs
Tx Unusable seconds: count of Unusable seconds at the near-end
Tx LSM in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.7
imaLinkCurrentNeRxUnusableSecs
Rx Unusable seconds: count of Unusable seconds at the near-end
Rx LSM in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.8
imaLinkCurrentFeTxUnusableSecs
Tx Unusable seconds at far-end: count of seconds with Tx Unusable
indications from the far-end Tx LSM in the current 15 minute
interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.9
imaLinkCurrentFeRxUnusableSecs
Rx Unusable seconds at far-end: count of seconds with Rx Unusable
indications from the far-end Rx LSM in the current 15 minute
interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.10
imaLinkCurrentNeTxNumFailures
The number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fault) in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.11
imaLinkCurrentNeRxNumFailures
The number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected,
or some form of implementation specific receive fault)
in the current 15 minute inte…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.12
imaLinkCurrentFeTxNumFailures
The number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE) in the
current 15 minute interval. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.13
imaLinkCurrentFeRxNumFailures
The number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE) in the
current 15 minute interval. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.14
imaLinkCurrentTxStuffs
Count of stuff events inserted in the transmit direction in
the current 15 minute interval. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.15
imaLinkCurrentRxStuffs
Count of stuff events detected in the receive direction in
the current 15 minute interval. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.10.1.16
.1.3.6.1.4.1.353.5.7.1.1.11 · 1 row entry · 17 columns
The IMA Link Interval table.
imaLinkIntervalEntry entry .1.3.6.1.4.1.353.5.7.1.1.11.1
An entry in the IMA Link Interval table.
Indexes
IF-MIBifIndex imaLinkIntervalNumber
Column Syntax OID
imaLinkIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least
recently completed 15 minutes interval (assuming that all
96 intervals are valid).
Integer32
Constraints:
range: 1-96
.1.3.6.1.4.1.353.5.7.1.1.11.1.1
imaLinkIntervalImaViolations
ICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions, in one of the
previous 96, individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.2
imaLinkIntervalOifAnomalies
The number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end in one of the previous 96, individual
15 minute, intervals. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.3
imaLinkIntervalNeSevErroredSecs
Count of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
condition, in one o…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.4
imaLinkIntervalFeSevErroredSecs
Count of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition, in one of the previous
96, individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.5
imaLinkIntervalNeUnavailSecs
Count of unavailable seconds at near-end in one of the previous
96, individual 15 minute, intervals: unavailability begins at the
onset of 10 contiguous SES-IMA and ends at the onset of 10
contiguous seconds with no SES…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.6
imaLinkIntervalFeUnavailSecs
Count of unavailable seconds at far-end in one of the previous
96, individual 15 minute, intervals: unavailability begins at the
onset of 10 contiguous SES-IMA-FE and ends at the onset of 10
contiguous seconds with no S…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.7
imaLinkIntervalNeTxUnusableSecs
Tx Unusable seconds: count of Unusable seconds at the near-end
Tx LSM in one of the previous 96, individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.8
imaLinkIntervalNeRxUnusableSecs
Rx Unusable seconds: count of Unusable seconds at the near-end
Rx LSM in one of the previous 96, individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.9
imaLinkIntervalFeTxUnusableSecs
Tx Unusable seconds at far-end: count of seconds with Tx Unusable
indications from the far-end Tx LSM in one of the previous 96,
individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.10
imaLinkIntervalFeRxUnusableSecs
Rx Unusable seconds at far-end: count of seconds with Rx Unusable
indications from the far-end Rx LSM in one of the previous 96,
individual 15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.11
imaLinkIntervalNeTxNumFailures
The number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fault) in one of the previous 96, individual
15 minute, intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.12
imaLinkIntervalNeRxNumFailures
The number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS, RFI-IMA,
Mis-Connected, or some form of implementation specific
receive fault) in one of the previous 96, …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.13
imaLinkIntervalFeTxNumFailures
The number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE) in one of the
previous 96, individual 15 minute, intervals. This is an optional
attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.14
imaLinkIntervalFeRxNumFailures
The number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE) in one of
the previous 96, individual 15 minute, intervals. This is an
optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.15
imaLinkIntervalTxStuffs
Count of stuff events inserted in the transmit direction in
one of the previous 96, individual 15 minute, intervals. This
is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.16
imaLinkIntervalRxStuffs
Count of stuff events detected in the receive direction in
one of the previous 96, individual 15 minute, intervals. This
is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.11.1.17
.1.3.6.1.4.1.353.5.7.1.1.12 · 1 row entry · 16 columns
The IMA Link Total table.
imaLinkTotalEntry entry .1.3.6.1.4.1.353.5.7.1.1.12.1
An entry in the IMA Link Total table.
Indexes
IF-MIBifIndex
Column Syntax OID
imaLinkTotalImaViolations
ICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions, in the previous 24
hour interval. Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.1
imaLinkTotalOifAnomalies
The number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end in the previous 24 hour interval.
Invalid 15 minute intervals count as 0. This is an optional
attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.2
imaLinkTotalNeSevErroredSecs
Count of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
condition, in the p…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.3
imaLinkTotalFeSevErroredSecs
Count of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition, in the previous 24
hour interval. Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.4
imaLinkTotalNeUnavailSecs
Count of unavailable seconds at near-end in the previous 24 hour
interval: unavailability begins at the onset of 10 contiguous
SES-IMA and ends at the onset of 10 contiguous seconds with no
SES-IMA. Invalid 15 minute i…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.5
imaLinkTotalFeUnavailSecs
Count of unavailable seconds at far-end in the previous 24 hour
interval: unavailability begins at the onset of 10 contiguous
SES-IMA-FE and ends at the onset of 10 contiguous seconds with no
SES-IMA-FE. Invalid 15 min…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.6
imaLinkTotalNeTxUnusableSecs
Tx Unusable seconds: count of Unusable seconds at the near-end
Tx LSM in the previous 24 hour interval. Invalid 15 minute
intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.7
imaLinkTotalNeRxUnusableSecs
Rx Unusable seconds: count of Unusable seconds at the near-end
Rx LSM in the previous 24 hour interval. Invalid 15 minute
intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.8
imaLinkTotalFeTxUnusableSecs
Tx Unusable seconds at far-end: count of seconds with Tx Unusable
indications from the far-end Tx LSM in the previous 24 hour
interval. Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.9
imaLinkTotalFeRxUnusableSecs
Rx Unusable seconds at far-end: count of seconds with Rx Unusable
indications from the far-end Rx LSM in the previous 24 hour
interval. Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.10
imaLinkTotalNeTxNumFailures
The number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fault) in the previous 24 hour interval.
Invalid 15 minute intervals cou…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.11
imaLinkTotalNeRxNumFailures
The number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS, RFI-IMA,
Mis-Connected, or some form of implementation specific receive fault)
in the previous 24 hour inte…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.12
imaLinkTotalFeTxNumFailures
The number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE) in the
previous 24 hour interval. Invalid 15 minute intervals count
as 0. This is an optional attribu…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.13
imaLinkTotalFeRxNumFailures
The number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE) in the
previous 24 hour interval. Invalid 15 minute intervals count
as 0. This is an optional attribut…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.14
imaLinkTotalTxStuffs
Count of stuff events inserted in the transmit direction in
the previous 24 hour interval. Invalid 15 minute intervals
count as 0. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.15
imaLinkTotalRxStuffs
Count of stuff events detected in the receive direction in
the previous 24 hour interval. Invalid 15 minute intervals
count as 0. This is an optional attribute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.353.5.7.1.1.12.1.16