imaLinkNeRxUnusableSecs
IMA-MIB ·
.1.3.6.1.4.1.353.5.7.1.1.4.1.20
Object
column
SNMPv2-SMICounter32
Rx Unusable seconds: count of Rx Unusable seconds at the near-end Rx LSM.
Context
- MIB
- IMA-MIB
- OID
.1.3.6.1.4.1.353.5.7.1.1.4.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- imaLinkEntry
- Table
- imaLinkTable
- Siblings
- 32
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| imaLinkIfIndex This corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('if… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.353.5.7.1.1.4.1.1 |
| imaLinkTxLid The outgoing LID used currently on the link by the local end.
This value has meaning only if the link belongs to an IMA group. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.10 |
| imaLinkRxLid The incoming LID used currently on the link by the remote
end as reported via ICP cells. This value has meaning only
if the link belongs to an IMA g… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.11 |
| imaLinkRelDelay The latest measured delay on this link relative to the link, in
the same IMA group, with the least delay. | column | MilliSeconds | .1.3.6.1.4.1.353.5.7.1.1.4.1.12 |
| imaLinkImaViolations ICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.13 |
| imaLinkOifAnomalies The number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end. This is an optional attribute. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.14 |
| imaLinkNeSevErroredSecs Count of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), L… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.15 |
| imaLinkFeSevErroredSecs Count of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.16 |
| imaLinkNeUnavailSecs Count of unavailable seconds at near-end: unavailability begins
at the onset of 10 contiguous SES-IMA and ends at the onset
of 10 contiguous seconds … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.17 |
| imaLinkFeUnavailSecs Count of unavailable seconds at far-end: unavailability begins
at the onset of 10 contiguous SES-IMA-FE and ends at the onset of
10 contiguous second… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.18 |
| imaLinkNeTxUnusableSecs Tx Unusable seconds: count of Tx Unusable seconds at the near-end
Tx LSM. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.19 |
| imaLinkRowStatus The imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.
To create a new conce… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.7.1.1.4.1.2 |
| imaLinkFeTxUnusableSecs Tx Unusable seconds at far-end: count of seconds with Tx Unusable
indications from the far-end Tx LSM. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.21 |
| imaLinkFeRxUnusableSecs Rx Unusable seconds at far-end: count of seconds with Rx Unusable
indications from the far-end Rx LSM. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.22 |
| imaLinkNeTxNumFailures The number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fa… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.23 |
| imaLinkNeRxNumFailures The number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS,
RFI-IMA, Mis-Connected or some form o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.24 |
| imaLinkFeTxNumFailures The number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE). This is an
optional attribute. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.25 |
| imaLinkFeRxNumFailures The number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE). This is an
optional attribute. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.26 |
| imaLinkTxStuffs Count of stuff events inserted in the transmit direction.
This is an optional attribute. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.27 |
| imaLinkRxStuffs Count of stuff events detected in the receive direction.
This is an optional attribute. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.28 |
| imaLinkRxTestPattern This object identifies the test pattern received in the
ICP Cell (octet 17) on the link during the IMA Test Pattern
Procedure. This value may then b… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.29 |
| imaLinkGroupIndex The value which identifies the IMA group (imaGroupIndex)
of which this link is a member. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.3 |
| imaLinkTestProcStatus This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2)… | column | ImaTestProcStatus | .1.3.6.1.4.1.353.5.7.1.1.4.1.30 |
| imaLinkValidIntervals The number of previous 15 minute intervals for which valid data
was collected. The value will be 96 unless the IMA group table
entry was created wit… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.31 |
| imaLinkInvalidIntervals The number of intervals for which no valid data is available.
This attribute is only mandatory when the IMA Link Interval
Statistics and/or IMA Link … | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.32 |
| imaLinkTimeElapsed The number of seconds that have elapsed since the beginning of
the current measurement period. This attribute is only mandatory
when the IMA Link Cu… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.4.1.33 |
| imaLinkNeTxState The current state of the near-end transmit link. | column | ImaLinkState | .1.3.6.1.4.1.353.5.7.1.1.4.1.4 |
| imaLinkNeRxState The current state of the near-end receive link. | column | ImaLinkState | .1.3.6.1.4.1.353.5.7.1.1.4.1.5 |
| imaLinkFeTxState The current state of the far-end transmit link as reported
via ICP cells. | column | ImaLinkState | .1.3.6.1.4.1.353.5.7.1.1.4.1.6 |
| imaLinkFeRxState The current state of the far-end receive link as reported
via ICP cells. | column | ImaLinkState | .1.3.6.1.4.1.353.5.7.1.1.4.1.7 |
| imaLinkNeRxFailureStatus The current link failure status of the near-end receive link. | column | ImaLinkFailureStatus | .1.3.6.1.4.1.353.5.7.1.1.4.1.8 |
| imaLinkFeRxFailureStatus The current link failure status of the far-end receive link
as reported via ICP cells. | column | ImaLinkFailureStatus | .1.3.6.1.4.1.353.5.7.1.1.4.1.9 |