imaGroupRowStatus
IMA-MIB ·
.1.3.6.1.4.1.353.5.7.1.1.2.1.2
Object
The imaGroupRowStatus object allows create, change, and delete
operations on imaGroupTable entries.
To create a new conceptual row (or instance) of the imaGroupTable,
imaGroupRowStatus must be set to 'createAndWait' or 'createAndGo'.
If settable, a successful set of the following objects must be
performed before the imaGroupRowStatus of a new conceptual row can
be set to 'active':
imaGroupMinNumTxLinks
imaGroupMinNumRxLinks
imaGroupTxImaId
Some objects in the imaGroupTable control settings which can only
be established or changed at group start-up time. These objects
include:
imaGroupTxImaId
imaGroupSymmetry
imaGroupTxFrameLength
To change (modify) the imaGroupTxImaId object, the manager must
first set imaGroupRowStatus to 'notInService'. However, changes
to the following two objects can be optionally allowed while the
imaGroupRowStatus is 'active':
imaGroupSymmetry
imaGroupTxFrameLength
These two objects can be changed when the imaGroupRowStatus is
'active' in order to allow the far-end to recover from its
Config-Aborted state without having to force the near-end Group
State machine to go to the 'Not Configured' state. Changing
these object values after group start-up has completed causes a
restart of the IMA group.
Alternatively, as noted above, the agent implementation may
simply require the imaGroupRowStatus object to first be set to
'notInService' before allowing changes to either of these two
objects.
To remove (delete) an imaGroupTable entry from this table, set
imaGroupRowStatus to 'destroy'.
Setting the imaGroupRowStatus to 'active' has the effect of
activating the Group Startup Procedure. The Group Startup
Procedure uses provisioned links that have imaLinkRowStatus set
to 'active' and imaLinkGroupIndex set to the imaGroupIndex in
this conceptual row.
When the imaGroupRowStatus is not in 'active' state, the Group
State machine is in its 'Not Configured' state.
Context
- MIB
- IMA-MIB
- OID
.1.3.6.1.4.1.353.5.7.1.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- imaGroupEntry
- Table
- imaGroupTable
- Siblings
- 41
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| imaGroupIndex A unique value for the IMA Group. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.1 |
| imaGroupNeTxClkMode Transmit clocking mode used by the near-end IMA group. | column | ImaGroupTxClkMode | .1.3.6.1.4.1.353.5.7.1.1.2.1.10 |
| imaGroupFeTxClkMode Transmit clocking mode used by the far-end IMA group. | column | ImaGroupTxClkMode | .1.3.6.1.4.1.353.5.7.1.1.2.1.11 |
| imaGroupTxTimingRefLink The ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery from
the ATM layer. The distinguished … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.353.5.7.1.1.2.1.12 |
| imaGroupRxTimingRefLink The ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer. The distinguished val… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.353.5.7.1.1.2.1.13 |
| imaGroupLastChange The time-of-day the IMA group last changed operational
state (i.e., value of imaGroupNeState changed). | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.353.5.7.1.1.2.1.14 |
| imaGroupTxImaId The IMA ID currently in use by the near-end IMA function. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.15 |
| imaGroupRxImaId The IMA ID currently in use by the far-end IMA function. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.16 |
| imaGroupTxFrameLength The frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup. | column | ImaFrameLength | .1.3.6.1.4.1.353.5.7.1.1.2.1.17 |
| imaGroupRxFrameLength Value of IMA frame length as received from remote IMA function. | column | ImaFrameLength | .1.3.6.1.4.1.353.5.7.1.1.2.1.18 |
| imaGroupDiffDelayMax The maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface. | column | MilliSeconds | .1.3.6.1.4.1.353.5.7.1.1.2.1.19 |
| imaGroupLeastDelayLink The ifIndex of the link configured in the IMA group which has
the smallest link propagation delay. The distinguished value of
zero may be used if no… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.353.5.7.1.1.2.1.20 |
| imaGroupDiffDelayMaxObs The latest maximum differential delay observed (in milliseconds)
between the links having the least and most link propagation delay,
among the receiv… | column | MilliSeconds | .1.3.6.1.4.1.353.5.7.1.1.2.1.21 |
| imaGroupAlphaValue This indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from … | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.22 |
| imaGroupBetaValue This indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from t… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.23 |
| imaGroupGammaValue This indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from th… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.24 |
| imaGroupRunningSecs The amount of time (in seconds) since this IMA group has
been in the Operational state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.25 |
| imaGroupUnavailSecs Count of one second intervals where the IMA Group Traffic
State Machine is Down. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.26 |
| imaGroupNeNumFailures The number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported since power-up or reboot. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.27 |
| imaGroupFeNumFailures The number of times a far-end group failure (Config-Aborted-FE,
Insufficient-Links-FE, Blocked-FE) has been reported since
power-up or reboot. This … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.28 |
| imaGroupTxAvailCellRate The current cell rate (truncated value in cells per second)
provided by this IMA group in the transmit direction,
considering all the transmit links … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.29 |
| imaGroupIfIndex This object identifies the logical interface number ('ifIndex')
assigned to this IMA group, and is used to identify corresponding
rows in the Interfa… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.353.5.7.1.1.2.1.3 |
| imaGroupRxAvailCellRate The current cell rate (truncated value in cells per second)
provided by this IMA group in the receive direction,
considering all the receive links in… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.30 |
| imaGroupNumTxCfgLinks The number of links that are configured to transmit in this IMA
group. This attribute overwrites the value of the
imaGroupNumRxActLinks attribute whe… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.31 |
| imaGroupNumRxCfgLinks The number of links that are configured to receive in this IMA
group. This attribute is overwritten by the value of the
imaGroupNumTxActLinks attribu… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.32 |
| imaGroupNumTxActLinks The number of links which are configured to transmit and are
currently Active in this IMA group. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.33 |
| imaGroupNumRxActLinks The number of links which are configured to receive and are
currently Active in this IMA group. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.34 |
| imaGroupTestLinkIfIndex This object is used to designate an interface as the test link
for use in the Test Pattern Procedure. The distinguished value of
zero specifies that… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.353.5.7.1.1.2.1.35 |
| imaGroupTestPattern The value of this object is used to specify the Tx Test Pattern
in an IMA group loopback operation. A value in the range 0 to
255 designates a speci… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.36 |
| imaGroupTestProcStatus This object is used to enable or disable the
Test Pattern Procedure, and to note whether at least one
link failed the test.
… | column | ImaTestProcStatus | .1.3.6.1.4.1.353.5.7.1.1.2.1.37 |
| imaGroupValidIntervals The number of previous 15 minute intervals for which valid data
was collected. The value will be 96 unless the IMA group table
entry was created wit… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.38 |
| imaGroupInvalidIntervals The number of intervals for which no valid data is available.
This attribute is only mandatory when the IMA Group Interval
Statistics and/or IMA Grou… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.39 |
| imaGroupNeState The current operational state of the near-end IMA Group State
Machine. | column | ImaGroupState | .1.3.6.1.4.1.353.5.7.1.1.2.1.4 |
| imaGroupTimeElapsed The number of seconds that have elapsed since the beginning of
the current measurement period. This attribute is only mandatory
when the IMA Group C… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.40 |
| imaGroupTxOamLabelValue IMA OAM Label value transmitted by the NE IMA unit. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.41 |
| imaGroupRxOamLabelValue IMA OAM Label value transmitted by the FE IMA unit. The value 0
likely means that the IMA unit has not received an OAM Label
from the FE IMA unit a… | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.42 |
| imaGroupFeState The current operational state of the far-end IMA Group State
Machine. | column | ImaGroupState | .1.3.6.1.4.1.353.5.7.1.1.2.1.5 |
| imaGroupFailureStatus The current failure status of the IMA group (the reason why
the GTSM is in the down state). | column | ImaGroupFailureStatus | .1.3.6.1.4.1.353.5.7.1.1.2.1.6 |
| imaGroupSymmetry Symmetry of the IMA group. | column | ImaGroupSymmetry | .1.3.6.1.4.1.353.5.7.1.1.2.1.7 |
| imaGroupMinNumTxLinks Minimum number of transmit links required to be Active for
the IMA group to be in the Operational state. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.8 |
| imaGroupMinNumRxLinks Minimum number of receive links required to be Active for
the IMA group to be in the Operational state. | column | Integer32 | .1.3.6.1.4.1.353.5.7.1.1.2.1.9 |