HUAWEI-VECTOR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
64

hwVectoringGroupTable

table
.1.3.6.1.4.1.2011.6.171.2 · 1 row entry · 7 columns
Open in standard view 
The table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this table is hwVectoringGroupIndex.
hwVectoringGroupEntry entry .1.3.6.1.4.1.2011.6.171.2.1
The table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this entry is hwVectoringGroupIndex.
Indexes
hwVectoringGroupIndex
Column Syntax OID
hwVectoringGroupIndex
This object identifies a row in this table.
The vectoring group 1 is the default group, can not add and delete.
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.2011.6.171.2.1.1
hwVectoringGroupNotReqBandsUs
This configuration parameter shall be an array of pairs of
sub-carrier indices for uptream . Each pair represents the
start and stop sub-carrier index of a frequency band in which
FEXT cancellation is not required. Up t…
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.6.171.2.1.2
hwVectoringGroupNotReqBandsDs
This configuration parameter shall be an array of pairs of
sub-carrier indices for downstream . Each pair represents the
start and stop sub-carrier index of a frequency band in which
FEXT cancellation is not required. U…
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.6.171.2.1.3
hwVectoringGroupLinkList
This object defines the link list of the vectoring group.
This is a string of 4 bytes of values indicates the port ifindex.
It can contain as most as 1024 link.
OctetStringr/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.6.171.2.1.4
hwVectoringGroupRowStatus
This object is used to create a new row or delete an existing row
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.171.2.1.5
hwVectoringGroupProtectionOfNotReqBandsDs
This object enable/disable the protection of vectoring
lines downstream.
This parameter must be used together with hwVectoringGroupNotReqBandsDs.
hwVectoringGroupNotReqBandsDs cannot be null when this node is set to ena…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.2.1.6
hwVectoringGroupProtectionOfNotReqBandsUs
This object enable/disable the protection of vectoring
lines upstream.
This parameter must be used together with hwVectoringGroupNotReqBandsUs.
hwVectoringGroupNotReqBandsUs cannot be null when this node is set to enabl…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.2.1.7

hwVectoringConfProfTable

table
.1.3.6.1.4.1.2011.6.171.3 · 1 row entry · 18 columns
Open in standard view 
The table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
specified in this document.
The index of this table is hwVectoringProfName.
hwVectoringConfProfEntry entry .1.3.6.1.4.1.2011.6.171.3.1
The table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
s…
Indexes
hwVectoringProfName
Column Syntax OID
hwVectoringProfName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.171.3.1.1
hwVectoringEnableUs
Enable/Disable FEXT cancellation control upstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the upstream direction from all the other vectoring lines into the line in the vectoring gr…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.3.1.2
hwVectoringEnableDs
Enable/Disable FEXT cancellation control downstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the downstream direction from all the other vectoring lines into the line in the vectorin…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.3.1.3
hwVectoringProfRowStatus
This object is used to create a new row or delete an existing row
in this table. Before a profile can be deleted, it must be not
referenced from all VDSL ports.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.171.3.1.4
hwVectoringProfLegacyCpeActivatePolicy
Vectoring legacy cpe activate policy.
Default values:global.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2) - The legacy cpe…
Enumerationr/w
Enumerated Values:
1noLimit
2block
3limit
4forceFriendlyDsLimitUs
5forceFriendlyDsNoLimitUs
255global
 .1.3.6.1.4.1.2011.6.171.3.1.5
hwVectoringProfLegacyCpeReservedBand
This object is used to set the reserved band of a legacy CPE.
The PSD on the frequency band is not shaped and the frequency band can carry traffic.
This object takes effect when hwVectoringProfLegacyCpeActivatePolicy is…
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.6.171.3.1.6
hwVectoringProfLegacyCpeToneBlackoutBand
This object is used to set the blackout band of a legacy CPE.
The blackout frequency band is disabled and cannot carry traffic.
This object takes effect when hwVectoringProfLegacyCpeActivatePolicy is set to limit.
Range…
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.6.171.3.1.7
hwVectoringConfProfLimitProfDsDataRateProf
The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2).
If th…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.171.3.1.8
hwVectoringConfProfLimitProfUsDataRateProf
The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2).
If th…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.171.3.1.9
hwVectoringConfProfLimitProfChanProf
The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2).
If the …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.171.3.1.10
hwVectoringConfVectoringModeCfg
Indicates the access controlling of the type of friendly or vectoring cpe.
Bit0 represent vectoring allowed or not allowed,0 represents not allowed,1 represents allowed.
bit1 represent full-friendly allowed or not allow…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.171.3.1.11
hwVectoringProfCableType
Cable type.
Options:
1. atis(1) - ATIS
2. quad(2) - Quad
3. paperInsulated(3) - Paper Insulated
4. tp100(4) - TP100
5. other(5) - Other
Enumerationr/w
Enumerated Values:
1atis
2quad
3paperInsulated
4tp100
5other
 .1.3.6.1.4.1.2011.6.171.3.1.12
hwVectoringProfLegacyCpeRatio
Legacy CPE ratio.
Options:
0: 1%~15%
1: 15%~25%
2: 25%~50%
3: >50%
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.2011.6.171.3.1.13
hwVectoringProfDisorderLeavingThreshold
The time between observed loss of US signal and forced cutoff of the DS signal, expressed in DMT symbols.
symbolsUnsigned32r/w
Constraints:
range: 0-40000
 .1.3.6.1.4.1.2011.6.171.3.1.14
hwVectoringConfProfLimitProfLineSpectrumProf
The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table,
(hwVOPLineSpectrumConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.171.3.1.15
hwVectoringConfProfLimitProfUpboProf
The value of this object identifies the row in the XDSL Upbo Configuration Profile Table,
(hwVOPUPBOConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2).
If the vectori…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.171.3.1.16
hwVectoringConfProfGfastFextCanelControlDs
Defines whether FEXT cancellation in the downstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled.
Options:
1. enable (1) - Enable FEXT cancellati…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.3.1.17
hwVectoringConfProfGfastFextCanelControlUs
Defines whether FEXT cancellation in the upstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled.
Options:
1. enable (1) - Enable FEXT cancellation…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.171.3.1.18

hwVectoringPortTable

table
.1.3.6.1.4.1.2011.6.171.4 · 1 row entry · 11 columns
Open in standard view 
The table hwVectoringPortTable contains port configuration about vectoring.
The index of this table is ifIndex.
hwVectoringPortEntry entry .1.3.6.1.4.1.2011.6.171.4.1
The table hwVectoringPortTable contains port configuration about vectoring.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwVectoringLinkCfgProf
This object configures the vectoring link profile name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.171.4.1.1
hwVectoringLinkBelongedVceId
The VCE ID uniquely identifies the VCE that manages and controls
the vectored group to which the line belongs. It consists of one
octet and valid ranges are from 1 to 96. The special value 0 means
the line is not in a v…
Unsigned32r/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.171.4.1.2
hwVectoringLinkVcePortIndex
The VCE port index is the physical index that uniquely identifies
the VCE port to which the line is connected. It is an integer from
0 to the maximum number of lines supported by the VCE. The special
value 4294967295 me…
Unsigned32
Constraints:
range: 0-1024
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.6.171.4.1.3
hwVectoringLinkBandPlanCompatible
Options:
1. compatible(1) - The vectoring line configured band plan is compatible with the vectoring band configuration
2. incompatible(2) - The vectoring line configured band plan is not compatible with the vectoring…
Enumeration
Enumerated Values:
1compatible
2incompatible
 .1.3.6.1.4.1.2011.6.171.4.1.4
hwVectoringLinkCPEType
If the port is activated, it is the type of the activated CPE.
If the port was activated but is not currently activated, it is the type of previsouly activated CPE connected to the port.
If the CPE and CO connected to t…
Enumeration
Enumerated Values:
1vectoring
2fullFriendly
3friendlyDs
4legacyVdsl2
5adsl
6unknown
7fast
 .1.3.6.1.4.1.2011.6.171.4.1.5
hwVectoringLinkLegacyPolicyUsed
Vectoring legacy cpe activate policy.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2) - The legacy cpe is not allowed to activ…
Enumeration
Enumerated Values:
-1invalidValue
1noLimit
2block
3limit
4forceFriendlyDsLimitUs
5forceFriendlyDsNoLimitUs
 .1.3.6.1.4.1.2011.6.171.4.1.6
hwVectoringLinkFallbackStatus
Options:
1. noFallback(1) - The fall back configuration is not in use, or the line works in vectoring mode or ADSL mode(G.992.x operation mode)
2. fallback(2) - The fall back configuration is in use, and…
Enumeration
Enumerated Values:
1noFallback
2fallback
255noConfig
 .1.3.6.1.4.1.2011.6.171.4.1.7
hwVectoringLinkClearCoefficient
Clear current coefficient and history coefficient.
Options:
1. clear(1) - Clear the current coefficient and history coefficient
2. invalidValue(-1) - Invalid value
Enumerationr/w
Enumerated Values:
-1invalidValue
1clear
 .1.3.6.1.4.1.2011.6.171.4.1.8
hwVectoringLinkLongLoopControlState
Indicates the long loop control state.
Options:
1. n(0) - Long loop control state is off
2. y(1) - Long loop control state is on
3. invalidValue(-1) - Invalid value
Enumeration
Enumerated Values:
-1invalidValue
0n
1y
 .1.3.6.1.4.1.2011.6.171.4.1.9
hwVectoringLinkLongLoopPolicyUsed
Indicates the long loop policy used.
Options:
1. nonVectoring(0) - Policy of non-vectoring.
If a vectoring port meets long line control requirements,
…
Enumeration
Enumerated Values:
-1invalidValue
0nonVectoring
1nonFextCanceling
 .1.3.6.1.4.1.2011.6.171.4.1.10
hwVectoringLinkLongLoopControlRemove
Remove the current long loop control.
If it is set to true, the control status is removed, and the system returns false upon a reading request.
Options:
1. false(0) - The system returns false upon a rea…
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2011.6.171.4.1.11

hwVectoringCrosstalkCouplingMatrixTable

table
.1.3.6.1.4.1.2011.6.171.6 · 1 row entry · 7 columns
Open in standard view 
The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this table are ifIndex and hwVectoringCrosstalkCouplingMatrixDirection.
hwVectoringCrosstalkCouplingMatrixEntry entry .1.3.6.1.4.1.2011.6.171.6.1
The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this entry are ifIndex and hwVectoringCrosstalkCouplingMatr…
Indexes
IF-MIBifIndex hwVectoringCrosstalkCouplingMatrixDirection
Column Syntax OID
hwVectoringCrosstalkCouplingMatrixDirection
The direction of the vectoring crosstalk coupling matrix
either upstream or downstream.
HUAWEI-XDSL-LINE-TC-MIBHwXdslDirection
Textual Convention: HUAWEI-XDSL-LINE-TC-MIBHwXdslDirection Enumeration
Type Values:
1upstream
2downstream
 .1.3.6.1.4.1.2011.6.171.6.1.1
hwVectoringCrosstalkCoupingMatrixOperType
This object is used to start the vectoring crosstalk coupling matrix.
Options:
1. start(1) - start the vectoring crosstalk coupling matrix
2. stop(2) - stop the vectoring crosstalk coupling matrix
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.2011.6.171.6.1.2
hwVectoringCrosstalkCoupingMatrixOperResult
This object identifies the crosstalk coupling matrix operation result.
Options:
1. normal(1) - The crosstalk coupling matrix operation result is normal.
2. fail(2) - The crosstalk coupling matrix o…
Enumeration
Enumerated Values:
1normal
2fail
 .1.3.6.1.4.1.2011.6.171.6.1.3
hwVectoringCrosstalkCouplingMatrixPortIfindexList
Ifindex list of port that effect another port in the same vectoring group.
This is a string of 4 bytes of values indicates the port ifindex.
OctetString
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.6.171.6.1.4
hwVectoringCrosstalkCouplingMatrixAverageMagnitudeList
In this matrix must be seen all vectoring subscribers with disturberline.
This is a string of 4 bytes of values indicates the port average magnitude.
The units is 0.1 dBm/Hz.
OctetString
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.6.171.6.1.5
hwVectoringCrosstalkCouplingMatrixCancellationStatusList
Indicates whether the impact on the port caused by a disturber port is canceled.
The connected link of each port is 1 bit, and the connected link IDs
of all the disturber ports form a character string.
The byte value in…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.171.6.1.6
hwVectoringCrosstalkCouplingMatrixPortLocationList
Indicates the connected link ID list of the device
where the disturber ports locate. The connected link of each port is 1 bit.
The byte value indicates:
1. local(0) - Local device
2. peer1(1) - Th…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.171.6.1.7

hwVectoringBoardVectoringStateTable

table
.1.3.6.1.4.1.2011.6.171.7 · 1 row entry · 3 columns
Open in standard view 
The table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwVectoringBoardVectoringStateEntry entry .1.3.6.1.4.1.2011.6.171.7.1
The table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwVectoringVpVectoringInterfaceState
The object indicates VCE vectoring interface state.
Options:
1. down(1) - vectoring interface state is abnormal
2. up(2) - vectoring interface state is normal
3. invalidValue(-1) - invalid value
Enumeration
Enumerated Values:
-1invalidValue
1down
2up
 .1.3.6.1.4.1.2011.6.171.7.1.1
hwVectoringVdslVectoringInterfaceState
The object indicates VDSL vectoring interface state.
Options:
1. down(1) - vectoring interface state is abnormal
2. up(2) - vectoring interface state is normal
3. invalidValue(-1) - invalid value
Enumeration
Enumerated Values:
-1invalidValue
1down
2up
 .1.3.6.1.4.1.2011.6.171.7.1.2
hwVectoringVdslVectoringSyncState
The object indicates Sync state between VCE and VDSL vectoring interface.
Options:
1. noSync(1) - communication between VCE and VDSL is abnormal
2. sync(2) - communication between VCE and VDSL is norma…
Enumeration
Enumerated Values:
-1invalidValue
1noSync
2sync
 .1.3.6.1.4.1.2011.6.171.7.1.3

hwVectoringNlvTable

table
.1.3.6.1.4.1.2011.6.171.11 · 1 row entry · 8 columns
Open in standard view 
The table hwVectoringNlvTable contains status parameters of node level vectoring.
The index of this table is hwVectoringNlvPeerId.
hwVectoringNlvEntry entry .1.3.6.1.4.1.2011.6.171.11.1
The table hwVectoringNlvTable contains status parameters of node level vectoring.
The index of this entry is hwVectoringNlvPeerId.
Indexes
hwVectoringNlvPeerId
Column Syntax OID
hwVectoringNlvPeerId
The value of this object identifies the node level vectoring peer equipment.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.6.171.11.1.1
hwVectoringNlvStatus
Indicates current status of node level vectoring.
This is a bit-map of possible conditions. The various bit
positions are:
1. noDefect(0) - This bit position positively reports that no defect exists
2. datap…
Bits
Enumerated Values:
0noDefect
1datapathfault
2managementpathfault
3clocksyncfault
4fault
5disable
 .1.3.6.1.4.1.2011.6.171.11.1.2
hwVectoringNlvPeerEquipmentSysMac
A 6-octet read-only value carrying the individual MAC address of the node level vectoring peer equipment.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.6.171.11.1.3
hwVectoringNlvDescription
Indicates description information of the node level vectoring peer equipment.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.171.11.1.4
hwVectoringNlvTimestamp
Indicates start time of the node level vectoring peer equipment.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.171.11.1.5
hwVectoringNlvGroupDslamList
Indicates infiniband port description information of the node level vectoring peer equipment.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.171.11.1.6
hwVectoringNlvClockSource
Indicates clock source of the node level vectoring peer equipment.
1. local(0) - The local device clock is used as the clock source
2. peer1(1) - The first peer device clock is used as the clock so…
Enumeration
Enumerated Values:
0local
1peer1
2peer2
 .1.3.6.1.4.1.2011.6.171.11.1.7
hwVectoringNlvFaultReason
Indicates the the reason of the node level vectoring fault.
1. normal(1) - The node level vectoring is normal
2. nlvConnectionFail(2) - The node level vectoring fault reason is nlv con…
Enumeration
Enumerated Values:
1normal
2nlvConnectionFail
3vectoringDisabled
4nlvConfigurationInconsistent
5synchronizationAbnormal
6nlvDisabled
 .1.3.6.1.4.1.2011.6.171.11.1.8

hwVectoringVceRunInfoCollectTable

table
.1.3.6.1.4.1.2011.6.171.13 · 1 row entry · 10 columns
Open in standard view 
Indicates the configuration of vectoring running information collection.
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwVectoringVceRunInfoCollectEntry entry .1.3.6.1.4.1.2011.6.171.13.1
Indicates the configuration of vectoring running information collection.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwVectoringVceRunInfoCollectType
The leaf is used to set the vectoring running information collection type.
Options:
1. crosstalkmatrix(1) - Collect information about crosstalk matrix for vectoring lines.
2. keyrecord(2) - Collect key vecto…
Enumerationr/w
Enumerated Values:
-1invalid
1crosstalkmatrix
2keyrecord
3couplingmatrix
4algorithmparameter
 .1.3.6.1.4.1.2011.6.171.13.1.1
hwVectoringVceRunInfoCollectStart
The leaf is used to start vectoring running information collection.
Options:
1. start(1) - Start to collect vectoring running information.
2. invalid(-1) - Invalid value.
Enumerationr/w
Enumerated Values:
-1invalid
1start
 .1.3.6.1.4.1.2011.6.171.13.1.2
hwVectoringVceRunInfoCollectState
Indicates the status of vectoring running information collection.
Options:
1. nocollect(1) - The collection does not start.
2. collecting(2) - The colleciton is running.
3. collected(3) - The collection completed.
Enumeration
Enumerated Values:
1nocollect
2collecting
3collected
 .1.3.6.1.4.1.2011.6.171.13.1.3
hwVectoringVceRunInfoCollectTimes
Indicates vectoring running information collection times.
4294967295 represents invalid value.
Unsigned32r/w
Constraints:
range: 1-5
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.6.171.13.1.4
hwVectoringVceRunInfoCollectInterval
Indicates the interval at which vectoring running information is collected.
4294967295 represents invalid value.
minuteUnsigned32r/w
Constraints:
range: 15-120
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.6.171.13.1.5
hwVectoringVceRunInfoCollectCurrentTime
Indicates the time at which vectoring running information is collected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.171.13.1.6
hwVectoringVceRunInfoCollectAlgoParaVictimPort
Indicates the ifindex of the victim port.
-1 represents invalid value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.171.13.1.7
hwVectoringVceRunInfoCollectAlgoParaDisturberLocation
Indicates the connected link ID list of the device where the disturber ports locate.
Options:
1. local(1) - Local device
2. peer(2) - Peer device
3. invalid(-1) - Invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1local
2peer
 .1.3.6.1.4.1.2011.6.171.13.1.8
hwVectoringVceRunInfoCollectAlgoParaDisturberPort
Indicates the ifindex of the disturber port.
-1 represents invalid value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.171.13.1.9
hwVectoringVceRunInfoCollectRequestId
The vce run info collect request ID, which identifies a collect request delivered by the NMS.
An collect request ID can be any unsigned integer in the range of 0-4294967295.
However, the IDs of different collect request…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.171.13.1.10