hwVectoringProfLegacyCpeActivatePolicy
HUAWEI-VECTOR-MIB ·
.1.3.6.1.4.1.2011.6.171.3.1.5
Object
column
r/w
Enumeration
Vectoring legacy cpe activate policy.
Default values:global.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2) - The legacy cpe is not allowed to activated in G.993.2 operation mode
3. limit(3) - The legacy cpe is allowed to activated in G.993.2 operation mode,
with PSD auto shaped to eliminate the self-FEXT to vectoring lines
4. forceFriendlyDsLimitUs(4) - Force friendly is used in the downstream direction, and PSD automatic
shaping is used in the upstream direction
5. forceFriendlyDsNoLimitUs(5) - Force friendly is used in the downstream direction, and no restriction
is set for the upstream direction
6. global(255) - Use the global vectoring legacy CPE activation policy
Context
- MIB
- HUAWEI-VECTOR-MIB
- OID
.1.3.6.1.4.1.2011.6.171.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVectoringConfProfEntry
- Table
- hwVectoringConfProfTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noLimit |
2 | block |
3 | limit |
4 | forceFriendlyDsLimitUs |
5 | forceFriendlyDsNoLimitUs |
255 | global |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVectoringProfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.1 |
| hwVectoringConfProfLimitProfChanProf The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to vectoring link when the line is activated… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.10 |
| hwVectoringConfVectoringModeCfg Indicates the access controlling of the type of friendly or vectoring cpe.
Bit0 represent vectoring allowed or not allowed,0 represents not allowed,1 represents allowed.
bit1 repr… | column | Integer32 | .1.3.6.1.4.1.2011.6.171.3.1.11 |
| hwVectoringProfCableType Cable type.
Options:
1. atis(1) - ATIS
2. quad(2) - Quad
3. paperInsulated(3) - Paper Insulated
4. tp100(4) - TP100
5. other(5) - Other | column | Enumeration | .1.3.6.1.4.1.2011.6.171.3.1.12 |
| hwVectoringProfLegacyCpeRatio Legacy CPE ratio.
Options:
0: 1%~15%
1: 15%~25%
2: 25%~50%
3: >50% | column | Unsigned32 | .1.3.6.1.4.1.2011.6.171.3.1.13 |
| hwVectoringProfDisorderLeavingThreshold The time between observed loss of US signal and forced cutoff of the DS signal, expressed in DMT symbols. | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.171.3.1.14 |
| hwVectoringConfProfLimitProfLineSpectrumProf The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table,
(hwVOPLineSpectrumConfProfTable) that applies to vectoring link when the line is… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.15 |
| hwVectoringConfProfLimitProfUpboProf The value of this object identifies the row in the XDSL Upbo Configuration Profile Table,
(hwVOPUPBOConfProfTable) that applies to vectoring link when the line is activated in non… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.16 |
| hwVectoringConfProfGfastFextCanelControlDs Defines whether FEXT cancellation in the downstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled.
Options:
… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.3.1.17 |
| hwVectoringConfProfGfastFextCanelControlUs Defines whether FEXT cancellation in the upstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled.
Options:
1.… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.3.1.18 |
| hwVectoringEnableUs Enable/Disable FEXT cancellation control upstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the upstream direction from all the other vectoring… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.3.1.2 |
| hwVectoringEnableDs Enable/Disable FEXT cancellation control downstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the downstream direction from all the other vecto… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.3.1.3 |
| hwVectoringProfRowStatus This object is used to create a new row or delete an existing row
in this table. Before a profile can be deleted, it must be not
referenced from all VDSL ports. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.171.3.1.4 |
| hwVectoringProfLegacyCpeReservedBand This object is used to set the reserved band of a legacy CPE.
The PSD on the frequency band is not shaped and the frequency band can carry traffic.
This object takes effect when h… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.6 |
| hwVectoringProfLegacyCpeToneBlackoutBand This object is used to set the blackout band of a legacy CPE.
The blackout frequency band is disabled and cannot carry traffic.
This object takes effect when hwVectoringProfLegacy… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.7 |
| hwVectoringConfProfLimitProfDsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.8 |
| hwVectoringConfProfLimitProfUsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | column | OctetString | .1.3.6.1.4.1.2011.6.171.3.1.9 |