hwVectoringLinkLegacyPolicyUsed
HUAWEI-VECTOR-MIB ·
.1.3.6.1.4.1.2011.6.171.4.1.6
Object
column
Enumeration
Vectoring legacy cpe activate policy.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2) - The legacy cpe is not allowed to activated in G.993.2 operation mode
3. limit(3) - The legacy cpe is allowed to activated in G.993.2 operation mode,
with PSD auto shaped to eliminate the self-FEXT to vectoring lines
4. forceFriendlyDsLimitUs(4) - Force friendly is used in the downstream direction, and PSD automatic
shaping is used in the upstream direction
5. forceFriendlyDsNoLimitUs(5) - Force friendly is used in the downstream direction, and no restriction
is set for the upstream direction
6. invalidValue(-1) - Invalid value
Context
- MIB
- HUAWEI-VECTOR-MIB
- OID
.1.3.6.1.4.1.2011.6.171.4.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwVectoringPortEntry
- Table
- hwVectoringPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalidValue |
1 | noLimit |
2 | block |
3 | limit |
4 | forceFriendlyDsLimitUs |
5 | forceFriendlyDsNoLimitUs |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVectoringLinkCfgProf This object configures the vectoring link profile name. | column | OctetString | .1.3.6.1.4.1.2011.6.171.4.1.1 |
| hwVectoringLinkLongLoopPolicyUsed Indicates the long loop policy used.
Options:
1. nonVectoring(0) - Policy of non-vectoring.
If a vectoring port meets long line … | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.10 |
| hwVectoringLinkLongLoopControlRemove Remove the current long loop control.
If it is set to true, the control status is removed, and the system returns false upon a reading request.
Options:
1. false(0) … | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.11 |
| hwVectoringLinkBelongedVceId The VCE ID uniquely identifies the VCE that manages and controls
the vectored group to which the line belongs. It consists of one
octet and valid ranges are from 1 to 96. The spec… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.171.4.1.2 |
| hwVectoringLinkVcePortIndex The VCE port index is the physical index that uniquely identifies
the VCE port to which the line is connected. It is an integer from
0 to the maximum number of lines supported by … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.171.4.1.3 |
| hwVectoringLinkBandPlanCompatible Options:
1. compatible(1) - The vectoring line configured band plan is compatible with the vectoring band configuration
2. incompatible(2) - The vectoring line configured band p… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.4 |
| hwVectoringLinkCPEType If the port is activated, it is the type of the activated CPE.
If the port was activated but is not currently activated, it is the type of previsouly activated CPE connected to th… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.5 |
| hwVectoringLinkFallbackStatus Options:
1. noFallback(1) - The fall back configuration is not in use, or the line works in vectoring mode or ADSL mode(G.992.x operation mode)
2. fallback(2) - Th… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.7 |
| hwVectoringLinkClearCoefficient Clear current coefficient and history coefficient.
Options:
1. clear(1) - Clear the current coefficient and history coefficient
2. invalidValue(-1) - Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.8 |
| hwVectoringLinkLongLoopControlState Indicates the long loop control state.
Options:
1. n(0) - Long loop control state is off
2. y(1) - Long loop control state is on
3. invalidValue(-1) - Invali… | column | Enumeration | .1.3.6.1.4.1.2011.6.171.4.1.9 |